Page 1 Wrangler 2 0 1 2 O W N E R ’ S M A N U A L Includes Wrangler Unlimited...
Page 2 VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name This manual illustrates and describes the operation of fea- Chrysler Group LLC shall be deemed to be deleted and the tures and equipment that are either standard or optional on name Chrysler Canada Inc.
Page 3: Introduction
TABLE OF CONTENTS SECTION PAGE ............3 INTRODUCTION .
Page 5: Table Of Contents
INTRODUCTION CONTENTS Introduction ......4 Warnings And Cautions ....8 Rollover Warning .
Page 6: Introduction
4 INTRODUCTION INTRODUCTION handles on different road surfaces. Your driving skills Congratulations on selecting your new Chrysler Group will improve with experience. When driving off-road or LLC vehicle. Be assured that it represents precision working the vehicle, don’t overload the vehicle or expect workmanship, distinctive styling, and high quality - all the vehicle to overcome the natural laws of physics.
Page 7: Rollover Warning
INTRODUCTION 5 NOTE: After reviewing the owner information, it Do not attempt sharp turns, abrupt maneuvers, or other should be stored in the vehicle for convenient referenc- unsafe driving actions that can cause loss of vehicle ing and remain with the vehicle when sold. control.
Page 8: How To Use This Manual
6 INTRODUCTION Failure to use the driver and passenger seat belts pro- Since the specification of your vehicle depends on the vided is a major cause of severe or fatal injury. In a items of equipment ordered, certain descriptions and rollover crash, an unbelted person is significantly more illustrations may differ from your vehicle’s equipment.
Page 9 INTRODUCTION 7...
Page 10: Warnings And Cautions
8 INTRODUCTION WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against op- erating procedures that could result in a collision or bodily injury. It also contains CAUTIONS against proce- dures that could result in damage to your vehicle. If you do not read this entire manual, you may miss important information.
Page 11: Vehicle Modifications/Alterations
INTRODUCTION 9 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a accident resulting in serious injury or death.
Page 13: Things To Know Before Starting Your Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A Word About Your Keys ....14 Vehicle Security Alarm — If Equipped ..19 Ignition Key Removal .
Page 14 12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Sound Horn On Lock ....23 Rear Door Removal (Four-Door Models) ..32 Using The Panic Alarm .
Page 15 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Lap/Shoulder Belt Untwisting Procedure ..52 Air Bag Deployment Sensors And Controls . . . 63 Adjustable Upper Shoulder Belt Anchorage . . . 52 Event Data Recorder (EDR) ....70 Seat Belts In Passenger Seating Positions .
Page 16: A Word About Your Keys
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS The keys for your new vehicle are enclosed in a plastic bag with the key code number on it. If you received your keys without the bag, ask your authorized dealer to give you the number.
Page 17: Key-In-Ignition Reminder
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 WARNING! WARNING! (Continued) • Do not leave children or animals inside parked • Before exiting a vehicle, always apply the parking vehicles in hot weather. Interior heat build-up may brake, shift the transmission into PARK, and re- cause serious injury or death.
Page 18: Sentry Key
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE SENTRY KEY seconds for a bulb check. If the light remains on after the The Sentry Key Immobilizer System prevents unauthor- bulb check, it indicates that there is a problem with the ized vehicle operation by disabling the engine.
Page 19: Replacement Keys
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 All of the keys provided with your new vehicle have dealer or by following the customer key programming been programmed to the vehicle electronics. procedure. This procedure consists of programming a blank key to the vehicle electronics. A blank key is one Replacement Keys that has never been programmed.
Page 20: General Information
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Insert the second valid key into the ignition switch. Repeat this procedure to program up to eight keys. If you Turn the ignition switch to the ON/RUN position within do not have a programmed Sentry Key , contact your 15 seconds.
Page 21: Vehicle Security Alarm - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 VEHICLE SECURITY ALARM — IF EQUIPPED Rearming The System The Vehicle Security Alarm monitors the vehicle doors, If something triggers the alarm, and no action is taken to swing gate, and ignition for unauthorized operation. disarm it, the Vehicle Security Alarm will turn off the While the Vehicle Security Alarm is armed, interior horn after three minutes, turn off all of the visual signals...
Page 22: To Disarm The System
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Disarm The System with the key and then locking it. The door will be locked To disarm the Vehicle Security Alarm, you will need to but the Vehicle Security Alarm will not arm. press the UNLOCK button on the RKE transmitter, or NOTE: turn the ignition switch to the ON/RUN position.
Page 23: Remote Keyless Entry (Rke) - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 The lights will fade to off after approximately 30 seconds or they will immediately fade to off once the ignition switch is turned to ON/RUN from the OFF position. NOTE: • The front courtesy overhead console and door cour- tesy lights do not turn on if the dimmer control is in the Dome ON position (extreme top position).
Page 24: Remote Key Unlock On First Press
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE UNLOCK button is pressed, the Illuminated Entry will 2. Continue to hold the RKE transmitter LOCK button initiate and the parking lights will flash twice. for at least four seconds, but not longer than 10 seconds, then press and hold the RKE transmitter UNLOCK Remote Key Unlock On First Press button.
Page 25: To Lock The Doors And Swing Gate
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 NOTE: Pressing the LOCK button on the RKE transmit- Settings (Customer-Programmable Features)” in “Un- ter while you are inside the vehicle will activate the derstanding Your Instrument Panel” for further infor- Vehicle Security Alarm. Opening a door with the Vehicle mation.
Page 26: To Turn Off Flash Lights With Lock
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE the headlights will turn on, the park lights will flash, the Settings (Customer-Programmable Features)” in “Un- horn will pulse on and off and the interior lights will turn derstanding Your Instrument Panel” for further infor- mation.
Page 27: Programming Additional Transmitters
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 Alarm activated will cause the alarm to sound. Press the 2. This device must accept any interference that may be RKE transmitter UNLOCK button to deactivate the Ve- received including interference that may cause undesired hicle Security Alarm.
Page 28: Remote Starting System - If Equipped
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Perchlorate Material – special handling may 2. Remove and replace the battery. Avoid touching the apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery, clean it with 1.
Page 29: How To Use Remote Start
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 How To Use Remote Start WARNING! All of the following conditions must be met before the • Do not start or run an engine in a closed garage or engine will remote start: confined area.
Page 30: To Enter Remote Start
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Remote Start Aborted — Hood Ajar • For security, power window operation is disabled when the vehicle is in the Remote Start mode. • Remote Start Aborted — Fuel Low • The engine can be started two consecutive times (two •...
Page 31: Doors
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 To Exit Remote Start Mode Without Driving The NOTE: The ignition switch must be in the ON/RUN Vehicle position in order to drive the vehicle. Press and release the REMOTE START button one time, DOORS or allow the engine to run for the entire 15-minute cycle.
Page 32: Upper Half Door Window Removal - If Equipped
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Upper Half Door Window Removal — If Equipped 2. Push down to ensure the half door window is fully Grasp the half door window and pull upward. seated. Front Door Removal WARNING! Do not drive your vehicle on public roads with the doors removed as you will lose the protection that they can provide.
Page 33 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 on one end (right) of the connector. This will unlock the connector tab, allowing the tab to be pressed down and enabling the harness to be disconnected. Hinge Pin Screw 3. Unplug the wiring harness connector under the instru- ment panel by pressing the tab at the side of the connector and pulling to disconnect.
Page 34: Rear Door Removal (Four-Door Models)
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Unhook the door strap from the body hook. Be careful 1. Roll down the glass window to prevent any damage. not to allow the door to swing fully open as the mirror 2.
Page 35 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 3. Slide the front seat(s) fully forward. NOTE: If the red latch on the connector is locked, push the red latch to the right until you can only see the latch 4. Remove the trim access door from the bottom of the on one end (right) of the connector.
Page 36: Door Locks
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 7. With the door open, lift the door to clear the hinge pins from their hinges and remove the door. NOTE: Doors are heavy; use caution when removing them. To reinstall the door(s), perform the previous steps in the opposite order.
Page 37 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 WARNING! • For personal security reasons and safety in an accident, lock the vehicle doors when you drive, as well as when you park and leave the vehicle. • When leaving the vehicle, always remove the key fob from the ignition and lock your vehicle.
Page 38: Power Door Locks - If Equipped
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Door Locks — If Equipped WARNING! The power door lock switch is located on each front door • For personal security reasons and safety in an panel. Press the switch forward to lock the doors, and rearward to unlock the doors.
Page 39 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 Automatic Door Locks — If Equipped Automatic Unlock Doors On Exit Programming The auto door lock feature default condition is disabled. The “Automatic Unlock Doors On Exit” feature can be When enabled, the door locks will lock automatically enabled or disabled as follows: when the vehicle’s speed exceeds 15 mph (24 km/h).
Page 40: Child-Protection Door Lock System - Rear Doors
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child-Protection Door Lock System — Rear Doors To provide a safer environment for small children riding in the rear seats, the rear doors are equipped with Child-Protection Door Lock system. To Engage Or Disengage The Child-Protection Door Lock System 1.
Page 41: Windows
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 NOTE: For emergency exit with the system engaged, move the rocker lever rearward (unlocked position), roll down the window and open the door with the outside door handle. WINDOWS Power Windows — If Equipped The power window switches are located on the instru- ment panel below the radio.
Page 42 40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Four-Door Models Window Lockout Switch — Four-Door Models The lower left switch controls the left rear passenger The window lockout switch (located between the front window, and the lower right switch controls the right window switches) allows you to disable the rear window rear passenger window.
Page 43: Wind Buffeting
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 Rear Power Windows — Four-Door Models Wind Buffeting The rear passenger window switches are located on the Wind buffeting can be described as the perception of back of the center floor console. Press the switch down- pressure on the ears or a helicopter-type sound in the ward to open the window and upward to close the ears.
Page 44: Occupant Restraints
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To open the swing gate, press the button on the gate CAUTION! handle. Do not press on rear wiper blade when closing the rear flip-up window, as damage to the blade will result.
Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 • Advanced Front Air Bags for driver and front passen- Please pay close attention to the information in this section. It tells you how to use your restraint system properly, to keep you and your passengers as safe as •...
Page 46 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Here are some simple steps you can take to minimize the ride properly buckled up in the rear seat. Never allow risk of harm from a deploying air bag: children to slide the shoulder belt behind them or under their arm.
Page 47 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 4. Do not lean against the door or window. If your WARNING! (Continued) vehicle has side air bags, and deployment occurs, the • Being too close to the steering wheel or instrument side air bags will inflate forcefully into the space panel during Advanced Front Air Bag deployment between you and the door.
Page 48: Lap/Shoulder Belts
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Buckle up even though you are an excellent driver, even Lap/Shoulder Belts on short trips. Someone on the road may be a poor driver All seating positions in your vehicle are equipped with and cause an accident that includes you.
Page 49 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 WARNING! (Continued) WARNING! (Continued) • Be sure everyone in your vehicle is in a seat and • Two people should never be belted into a single using a seat belt properly. seat belt. People belted together can crash into one •...
Page 50 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. The seat belt latch plate is above the back of the front 3. When the belt is long enough to fit, insert the latch seat and next to your arm in the rear seat. Grasp the latch plate into the buckle until you hear a “click.”...
Page 51 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 WARNING! WARNING! (Continued) • A belt that is worn under your arm is dangerous. • A belt that is buckled into the wrong buckle will Your body could strike the inside surfaces of the not protect you properly.
Page 52 50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The Seat Belt Reminder Light will remain on WARNING! until the driver and front passenger (if equipped with • A lap belt worn too high can increase the risk of front passenger BeltAlert ) seat belt is buckled. For further information, refer to “Enhanced Seat Belt Use internal injury in an accident.
Page 53: Rear Center Lap/Shoulder Belt Retractor Lockout - Four-Door Models Only
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 6. To release the belt, push the red button on the buckle. Rear Center Lap/Shoulder Belt Retractor The belt will automatically retract to its stowed position. Lockout — Four-Door Models Only If necessary, slide the latch plate down the webbing to This feature is designed to lock the retractor whenever allow the belt to retract fully.
Page 54: Lap/Shoulder Belt Untwisting Procedure
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, WARNING! grasp and twist the belt webbing 180 degrees to create a fold that begins immediately above the latch plate. The rear center lap/shoulder belt is equipped with a lock-out feature to ensure that the rear seatback is in 3.
Page 55 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 WARNING! Position the shoulder belt height adjusters so that the belt rests across the middle of your shoulder. Failure to adjust the safety belt properly could reduce the effectiveness of the seat belt and increase the risk of injury in an accident.
Page 56: Seat Belts In Passenger Seating Positions
54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belts In Passenger Seating Positions Only pull the belt webbing out far enough to comfortably The seat belts in the passenger seating positions are wrap around the occupant’s mid-section so as to not equipped with Automatic Locking Retractors (ALR) activate the ALR.
Page 57: Energy Management Feature
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 How To Engage The Automatic Locking Mode WARNING! 1. Buckle the combination lap and shoulder belt. • The belt and retractor assembly must be replaced 2. Grasp the shoulder portion and pull downward until if the seat belt assembly Automatic Locking Re- the entire belt is extracted.
Page 58: Seat Belt Pretensioners
56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: These devices are not a substitute for proper seat WARNING! belt placement by the occupant. The seat belt still must be • The belt and retractor assembly must be replaced worn snugly and positioned properly. if the seat belt assembly Automatic Locking Re- The pretensioners are triggered by the Occupant Re- tractor (ALR) feature or any other seat belt func-...
Page 59: Seat Belts And Pregnant Women
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 The BeltAlert warning sequence begins after the vehicle BeltAlert can be enabled or disabled by your authorized speed is over 5 mph (8 km/h), by blinking the Seat Belt dealer. Chrysler Group LLC does not recommend deac- Reminder Light and sounding an intermittent chime.
Page 60: Seat Belt Extender
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belt Extender Supplemental Restraint System (SRS) — Air Bags If a seat belt is too short, even when fully extended and This vehicle has Advanced Front Air Bags for both the when the adjustable upper shoulder belt anchorage (if driver and right front passenger as a supplement to the equipped) is in its lowest position, your authorized...
Page 61 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 The Advanced Front Air Bags have a multistage inflator design. This allows the air bag to have different rates of inflation that are based on the severity and type of collision. This vehicle may be equipped with driver and/or front passenger seat track position sensors that may adjust the inflation rate of the Advanced Front Air Bags based upon seat position.
Page 62 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Air Bag System Components Advanced Front Air Bag Features Your vehicle may be equipped with the following air bag The Advanced Front Air Bag system has multistage system components: driver and front passenger air bags. This system provides output appropriate to the severity and type of collision as •...
Page 63 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 WARNING! WARNING! (Continued) • No objects should be placed over or near the air bag • If your vehicle is equipped with SAB, do not on the instrument panel, because any such objects attach cupholders or any other objects on or could cause harm if the vehicle is in a collision around the door.
Page 64 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Seat-Mounted Side Air Bags When the air bag deploys, it opens the seam between the (SAB) — If Equipped front and side of the seat’s trim cover. Each air bag Supplemental Seat-Mounted Side Air Bags (SAB) may deploys independently;...
Page 65: Air Bag Deployment Sensors And Controls
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 Along with seat belts and pretensioners, Advanced Front Advanced Front Air Bags are designed to provide addi- Air Bags work with the knee bolsters to provide im- tional protection by supplementing the seat belts in proved protection for the driver and front passenger.
Page 66 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Because air bag sensors measure vehicle deceleration Also, the ORC turns on the Air Bag Warning over time, vehicle speed and damage by themselves are Light for four to eight seconds for a self-check not good indicators of whether or not an air bag should when the ignition is first turned on.
Page 67 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 are possible, based on the collision type and severity. The WARNING! steering wheel hub trim cover and the upper right side of the instrument panel separate and fold out of the way as Ignoring the Air Bag Warning Light in your instru- the air bags inflate to their full size.
Page 68 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The ORC determines if a side collision requires the side Front And Side Impact Sensors air bags to inflate, based on the severity and type of In front and side impacts, front and side impact sensors collision.
Page 69 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 • Unlock the doors automatically. However, if you haven’t healed significantly within a few days, or if you have any blistering, see your doctor If A Deployment Occurs immediately. The Advanced Front Air Bags are designed to deflate •...
Page 70 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • Do not attempt to modify any part of your air bag • Deployed air bags and seat belt pretensioners system. The air bag may inflate accidentally or cannot protect you in another collision. Have the may not function properly if modifications are air bags, seat belt pretensioner, and seat belt made.
Page 71 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 Maintaining Your Air Bag System Air Bag Warning Light You will want to have the air bags ready to WARNING! inflate for your protection in a collision. The Air Bag Warning Light monitors the internal •...
Page 72: Event Data Recorder (Edr)
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Whether or not the driver and passenger safety belts NOTE: If the speedometer, tachometer, or any engine related gauges are not working, the Occupant Restraint were buckled/fastened; Controller (ORC) may also be disabled. The air bags may •...
Page 73: Child Restraints
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 To read data recorded by an EDR, special equipment is There are different sizes and types of restraints for required, and access to the vehicle or the EDR is needed. children from newborn size to the child almost large In addition to the vehicle manufacturer, other parties, enough for an adult safety belt.
Page 74 72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Infants And Child Restraints convertible child seat. Both types of child restraints are Safety experts recommend that children ride rearward- held in the vehicle by the lap/shoulder belt or the facing in the vehicle until they are two years old or until LATCH child restraint anchor system.
Page 75 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 Here are some tips for getting the most out of your child seat belt tight around the child restraint so that it is not restraint: necessary to use a locking clip. The ALR will make a ratcheting noise if you extract the entire belt from the •...
Page 76 74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE around, and insert the latch plate into the buckle convertible child seats used in the forward-facing direc- again. If you still cannot make the child restraint tion are for children who are over two years old or who secure, try a different seating position.
Page 77 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 Children Too Large For Booster Seats NOTE: For additional information, refer to Children who are large enough to wear the shoulder belt www.seatcheck.org or call 1–866–SEATCHECK. Cana- comfortably, and whose legs are long enough to bend dian residents should refer to Transport Canada’s web- over the front of the seat when their back is against the site for additional information: http://www.tc.gc.ca/...
Page 78 76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE In general, you will first loosen the adjusters on the lower WARNING! and tether straps so that you can more easily attach the hook or connector to the lower and tether anchorages. An incorrectly anchored tether strap could lead to The tether strap should be routed under the center of the increased head motion and possible injury to the...
Page 79 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 seat cushion surfaces. Regardless of the specific type of kits or retro-fit kits. You are urged to take advantage of all lower attachment, never install LATCH-compatible child the available attachments provided with your child re- seats such that two seats share a common lower anchor- straint in any vehicle.
Page 80 78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE All three rear seating positions of the four-door model the vehicle’s seat belts. Please refer to “Installing Child have lower anchorages that are capable of accommodat- Restraints Using The Vehicle Seat Belt” for typical instal- ing LATCH-compatible child seats having flexible, lation instructions.
Page 81 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 Latch Anchorages (Two-Door Models) Latch Anchorages (Four-Door Models)
Page 82 80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE In addition, there are tether strap anchorages behind each rear seating position located on the back of the seat. Tether Strap Mounting (Four-Door Models) Many, but not all, restraint systems will be equipped with separate straps on each side, with each having a hook or Tether Strap Mounting (Two-Door Models) connector for attachment to the lower anchorage and a...
Page 83 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 a hook for attachment to the tether strap anchorage, and WARNING! a means for adjusting the tension of the strap. Improper installation of a child restraint to the You will first loosen the child seat adjusters on the lower LATCH anchorages can lead to failure of an infant or straps and on the tether strap so that you can more easily child restraint.
Page 84 82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE description under “Seat Belts In Passenger Seating Posi- Installing a Child Restraint with an ALR: tions” section. The chart below defines the seating posi- 1. To install a child restraint with ALR, first, pull enough tions with an Automatic Locking Retractor (ALR) or a of the seat belt webbing from the retractor to route it cinching latch plate.
Page 85 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 To attach a Child Restraint tether strap: Tether Strap Mounting (Four-Door Models) Route the tether strap over the seatback and attach the Tether Strap Mounting (Two-Door Models) hook to the tether anchor located on the back of the seat. For the outboard seating positions, route the tether under the head restraint, and attach the hook to the tether anchor located on the back of the seat.
Page 86: Engine Break-In Recommendations
84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • If the belt still can’t be tightened, or if pulling and WARNING! pushing on the restraint loosens the belt, disconnect the latch plate from the buckle, turn the buckle An incorrectly anchored tether strap could lead to around, and insert the latch plate into the buckle increased head motion and possible injury to the again.
Page 87: Safety Tips
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 Drive moderately during the first 500 miles (800 km). A new engine may consume some oil during its first few After the initial 60 miles (100 km), speeds up to 50 or thousand miles (kilometers) of operation.
Page 88: Exhaust Gas
86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Exhaust Gas WARNING! (Continued) • It is extremely dangerous to ride in a cargo area, WARNING! inside or outside of a vehicle. In a collision, people Exhaust gases can injure or kill. They contain carbon riding in these areas are more likely to be seri- monoxide (CO), which is colorless and odorless.
Page 89: Safety Checks You Should Make Inside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 If you are required to drive with the trunk/liftgate open, Safety Checks You Should Make Inside The make sure that all windows are closed and the climate Vehicle control BLOWER switch is set at high speed. DO NOT Seat Belts use the recirculation mode.
Page 90 88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Defroster WARNING! (Continued) Check operation by selecting the defrost mode and place • Always make sure that floor mats are properly the blower control on high speed. You should be able to attached to the floor mat fasteners.
Page 91: Periodic Safety Checks You Should Make Outside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 lodged in the tread or sidewall. Inspect the tread for cuts WARNING! (Continued) and cracks. Inspect sidewalls for cuts, cracks and bulges. • Always make sure that objects cannot fall into the Check the wheel nuts for tightness.
Page 93: Understanding The Features Of Your Vehicle
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS Mirrors ......96 Uconnect™ Phone Features ... . . 112 Inside Day/Night Mirror .
Page 94 92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Seats ......135 Replacing The Rear Seat — Two-Door Models .
Page 95 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 Front Fog Lights ..... 152 To Deactivate ..... . . 161 Instrument Panel Dimmer .
Page 96 94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dual Top — If Equipped ....170 Door Frame Installation — Two-Door Models ......190 Removing The Soft Top .
Page 97 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 Sunrider (Two-Door Models) — Folding Windshield ....254 If Equipped ......248 Lowering The Windshield And Removing Opening The Sunrider .
Page 98: Mirrors
96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical adjustment of the mirror. The mirror should be adjusted to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle).
Page 99: Outside Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 Outside Mirrors WARNING! To receive maximum benefit, adjust the outside mirror(s) to center on the adjacent lane of traffic with a slight Vehicles and other objects seen in the passenger side overlap of the view obtained on the inside mirror. convex mirror will look smaller and farther away than they really are.
Page 100: Power Mirrors - If Equipped
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Mirrors — If Equipped After selecting a mirror, move the knob in the same The power mirror switch is located on the center of the direction you want the mirror to move. Use the center off instrument panel, below the climate controls.
Page 101: Uconnect™ Phone - If Equipped
• www.chrysler.com/uconnect • www.dodge.com/uconnect Vanity Mirror Uconnect™ Phone — IF EQUIPPED • www.jeep.com/uconnect Uconnect™ Phone is a voice-activated, hands-free, in- • or call 1–877–855–8400 vehicle communications system. Uconnect™ Phone al- lows you to dial a phone number with your mobile phone using simple voice commands (e.g., “Call”...
Page 102 100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Uconnect™ Phone allows you to transfer calls between WARNING! the system and your mobile phone as you enter or exit your vehicle and enables you to mute the system’s Any voice commanded system should be used only microphone for private conversation.
Page 103: Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 Voice Command Button Operation Actual button location may vary with the ra- Voice commands can be used to operate the Uconnect™ dio. The individual buttons are described in the Phone and to navigate through the Uconnect™ Phone “Operation”...
Page 104 102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE example, you can use the compound form voice Cancel Command command “Phonebook New Entry”, or you can break At any prompt, after the beep, you can say “Cancel” and the compound form command into two voice com- you will be returned to the main menu.
Page 105 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 • When prompted, after the beep, say “Pair a Phone” phone to use if multiple mobile phones are in the and follow the audible prompts. vehicle at the same time. For example, if priority three and priority five phones are present in the vehicle, the •...
Page 106 104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Uconnect™ Phone will confirm the phone number • The Uconnect™ system will confirm the name and and then dial. The number will appear in the display then dial the corresponding phone number, which of certain radios.
Page 107 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 • When prompted, enter the number designation (e.g., Phonebook Download – Automatic Phonebook “Home”, “Work”, “Mobile”, or “Other”). This will Transfer From Mobile Phone allow you to store multiple numbers for each phone- If equipped and specifically supported by your phone, book entry, if desired.
Page 108 106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Depending on the maximum number of entries down- Phonebook Download — Single Entry loaded, there may be a short delay before the latest If equipped and supported by your phone, Uconnect™ downloaded names can be used. Until then, if avail- Phone also allows the user to download entries one at a able, the previous downloaded phonebook is available time from their phone via Bluetooth .
Page 109 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 • You will then be asked for the name of the phonebook first disconnect or drop the Bluetooth connection to the Uconnect™ phone, and then send the address entry that you wish to edit. book entry via Bluetooth .
Page 110 108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • After you enter the name, the Uconnect™ Phone will Delete Uconnect™ Phonebook Entry ask you which designation you wish to delete: home, NOTE: Editing phonebook entries is recommended work, mobile, other, or all. Say the designation you when the vehicle is not in motion.
Page 111: Phone Call Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 • Note that only the phonebook in the current language • The Uconnect™ Phone will then prompt you as to the is deleted. number designation you wish to call. • Automatic downloaded phonebook entries cannot be •...
Page 112 110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE call, press and hold the button until you hear a single call. The first call will be on hold while the second call is beep, indicating that the incoming call was rejected. in progress. To go back to the first call, refer to “Toggling Between Calls”...
Page 113 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 Conference Call Call Termination When two calls are in progress (one active and one on To end a call in progress, momentarily press the hold), press and hold the button until you hear a button.
Page 114: Uconnect™ Phone Features
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Call Continuation Uconnect™ Phone Features Call continuation is the progression of a phone call on the Language Selection Uconnect™ Phone after the vehicle ignition key has been To change the language that the Uconnect™ Phone is switched to OFF.
Page 115 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 Emergency Assistance Canada and 060 for Mexico). The number dialed may If you are in an emergency and the mobile phone is not be applicable with the available mobile service and reachable: area. •...
Page 116 114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Towing Assistance Paging If you need towing assistance: To learn how to page, refer to “Working with Automated Systems”. Paging works properly except for pagers of • Press the button to begin. certain companies, which time out a little too soon to •...
Page 117 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 When calling a number with your Uconnect™ Phone that The Uconnect™ Phone will then send the corresponding normally requires you to enter in a touch-tone sequence phone number associated with the phonebook entry, as on your mobile phone keypad, you can press the tones over the phone.
Page 118 116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turning Confirmation Prompts On/Off Dialing Using the Mobile Phone Keypad Turning confirmation prompts off will stop the system You can dial a phone number with your mobile phone from confirming your choices (e.g., the Uconnect™ keypad and still use the Uconnect™...
Page 119: Advanced Phone Connectivity
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 Mute/Un-Mute (Mute OFF) from your Uconnect™ Phone paired mobile phone to the When you mute the Uconnect™ Phone, you will still be Uconnect™ Phone or vice versa, press the button able to hear the conversation coming from the other and say “Transfer Call”.
Page 120 118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When prompted, say “List Phones”. • The selected phone will be used for the next phone call. If the selected phone is not available, the • The Uconnect™ Phone will play the phone names of Uconnect™...
Page 121: Things You Should Know About Your Uconnect™ Phone
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 Things You Should Know About Your Uconnect™ You can either press the Uconnect™ Phone button to Phone restore the factory setting or repeat the words and phrases when prompted by the Uconnect™ Phone. For Uconnect™...
Page 122 120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • fully closed windows, Voice Command • For best performance, adjust the rearview mirror to • dry weather condition. provide at least ⁄ in (1 cm) gap between the overhead • Even though the system is designed for users speaking console (if equipped) and the mirror.
Page 123 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 • Numbers must be spoken in single digits. “800” must • fully closed windows, be spoken “eight-zero-zero” not “eight hundred”. • dry weather conditions, and • You can say “O” (letter “O”) for “0” (zero). •...
Page 124 122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Send Messages: Uconnect™ Phone can read or send new messages on You can send messages using Uconnect™ Phone. To send your phone. a new message: • Press the Read Messages: button. If you receive a new text message while your phone is •...
Page 125 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 List of Preset Messages: 11. See You in 15 minutes 1. Yes 12. I am on my way 2. No 13. I’ll be late 3. Where are you? 14. Are you there yet? 4.
Page 126 124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Turn SMS Incoming Announcement ON/OFF Bluetooth Communication Link Turning the SMS Incoming Announcement OFF will stop Mobile phones have been found to lose connection to the the system from announcing the new incoming mes- Uconnect™...
Page 127 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125...
Page 128 126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 129 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127...
Page 130 128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) zero call cancel confirmation prompts three continue four delete five dial download seven edit eight emergency nine English star (*) erase all plus (+) Espanol pound (#) Francais add location...
Page 131 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 Voice Commands Voice Commands Primary Alternate(s) Primary Alternate(s) language return to main menu return or main menu list names select phone select list phones send mobile set up phone settings or phone set up mute towing assistance mute off...
Page 132: General Information
130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information NOTE: Take care to speak into the Voice Interface This device complies with Part 15 of the FCC rules and System as calmly and normally as possible. The ability of RSS 210 of Industry Canada. Operation is subject to the the Voice Interface System to recognize user voice com- following conditions: mands may be negatively affected by rapid speaking or a...
Page 133: Commands
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 If you ever wish to interrupt the system while it lists The system will best recognize your speech if the win- options, press the Voice Command button, listen dows are closed, and the heater/air conditioning fan is for the beep, and say your command.
Page 134 132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Use the ON/OFF VOLUME rotary knob to adjust the Radio AM volume to a comfortable level while the Voice Command To switch to the AM band, say “AM” or “Radio AM”. In system is speaking.
Page 135 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 • “Menu Radio” (to switch to the radio menu) Disc To switch to the disc mode, say “Disc”. In this mode, you • “Main Menu” (to switch to the main menu) may say the following commands: Satellite Radio •...
Page 136 134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • “Switch to system setup” − “Continue” (to continue recording) • “Change to setup” − “Delete” (to delete the recording) • “Play Memos” (to play previously recorded memos) • “Main menu setup” or —...
Page 137: Voice Training
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 Voice Training WARNING! For users experiencing difficulty with the system recog- • It is dangerous to ride in a cargo area, inside or nizing their voice commands or numbers the Uconnect™ Voice “Voice Training” feature may be used. outside of a vehicle.
Page 138: Manual Seat Height Adjustment - If Equipped
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE position. Then, using body pressure, move forward and WARNING! rearward on the seat to be sure that the seat adjusters • Adjusting a seat while driving may be dangerous. have latched. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death.
Page 139: Front Seatback Recline
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 Seat Height Adjustment Recline Lever Front Seatback Recline WARNING! Lean forward before lifting the handle, then lean back to the desired position and release the handle. Lift the Do not ride with the seatback reclined so that the handle to return the seatback to an upright position.
Page 140: Front Passenger Easy Entry Seat - Two-Door Models
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Front Passenger Easy Entry Seat — Two-Door Models Pull upward on the recline lever (toward the rear of the vehicle) and slide the entire seat forward. Easy Entry Seat To return the seat to a sitting position, rotate the seatback upright until it locks and push the seat rearward until the track locks.
Page 141: Tip N' Slide Seats - Two-Door Models
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 NOTE: Driver’s Seat • The front passenger seats have a track memory, which Pull upward on the recline lever and bring the seatback returns the seat to just past the halfway point of the to its full forward position.
Page 142 140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rotate the entire seat assembly toward the instrument Pull upward on the recline lever and slide the entire seat panel. forward (Easy Entry). Tip n’ Slide Easy Entry Lever With the seat forward, pull the entire seat assembly Passenger Seat In addition to Easy Entry, the front passenger seat is also toward the instrument panel.
Page 143: Heated Seats - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 controls for each seat are located on a switch bank near the bottom center of the instrument panel. You can choose from HIGH, LOW or OFF heat settings. Amber indicator lights in each switch indicate the level of heat in use.
Page 144: Head Restraints
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE two to one, indicating the change. The LOW-level setting WARNING! (Continued) will turn OFF automatically after approximately 30 min- • Do not place anything on the seat that insulates utes. against heat, such as a blanket or cushion. This NOTE: When a heat setting is selected, heat will be felt may cause the seat heater to overheat.
Page 145 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 WARNING! The head restraints for all occupants must be prop- erly adjusted prior to operating the vehicle or occu- pying a seat. Head restraints should never be ad- justed while the vehicle is in motion. Driving a vehicle with the head restraints improperly adjusted or removed could cause serious injury or death in the event of a collision.
Page 146: Fold And Tumble Rear Seat - Two-Door Models
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fold And Tumble Rear Seat — Two-Door Models NOTE: • Prior to folding the rear seat, it may be necessary to reposition the front seats. • Be sure that the front seats are fully upright and positioned forward.
Page 147: Removing The Rear Seat - Two-Door Models
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 Removing The Rear Seat — Two-Door Models WARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed.
Page 148: Replacing The Rear Seat - Two-Door Models
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Press down on the release bar on each side, and pull Replacing The Rear Seat — Two-Door Models the seat out and away from the lower bracket. Reverse the steps for removing the seat. 3.
Page 149 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 NOTE: To Fold Down The Rear Seat • Prior to folding the rear seat, it may be necessary to Locate the pull strap (lower outboard side of seat), and reposition the front seat to its mid-track position. pull it toward you until the seatback releases.
Page 150: To Open And Close The Hood
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Raise The Rear Seat TO OPEN AND CLOSE THE HOOD Raise the seatback and lock it into place. If interference Release both the hood latches. from the cargo area prevents the seatback from fully locking, you will have difficulty returning the seat to its proper position.
Page 151: Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 down slightly on the hood before pushing the safety passing light, fog lights, instrument panel light dimming latch. Insert the support rod into the slot on the hood. and turn signals. The lever is located on the left side of the steering column.
Page 152: Headlights And Parking Lights
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Headlights And Parking Lights NOTE: Lens fogging can occur under certain weather Turn the end of the multifunction lever to the first detent conditions. Turning the headlights on will usually accel- for parking lights and instrument panel lights. Turn to erate the clearing process.
Page 153: Turn Signals
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 Headlight Switch Turn Signal Operation NOTE: The engine must be running before the head- NOTE: • If either light remains on and does not flash, or there is lights will turn on in the Automatic mode. a very fast flash rate, check for a defective outside light Turn Signals bulb.
Page 154: Lane Change Assist
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • A tone will chime if the turn signals are left on for Flash-To-Pass more than 1 mile (2 km). You can signal another vehicle with your headlights by lightly pulling the multifunction lever toward the steer- Lane Change Assist ing wheel.
Page 155: Instrument Panel Dimmer
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 Instrument Panel Dimmer Rotate the center portion of the lever to the extreme bottom position to fully dim the instrument panel lights and prevent the interior lights from illuminating when a door is opened. Rotate the center portion of the lever up to increase the brightness of the instrument panel lights when the park- ing lights or headlights are on.
Page 156: Interior Lights
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The Daytime Running Light on the same side of The sports bar reading lights (available on four-door the vehicle as the active turn signal will turn off auto- models) can be turned on by pressing the switches, matically when a turn signal is in operation and turn on located on either side of the lens.
Page 157: Windshield Wipers And Washers
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 WINDSHIELD WIPERS AND WASHERS The windshield wiper/washer control lever is located on the right side of the steering column. The front wipers are operated by rotating a switch, located at the end of the lever.
Page 158: Windshield Wiper Operation
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Windshield Wiper Operation CAUTION! Rotate the end of the lever upward to the second detent past the intermittent settings for low-speed wiper operation. In cold weather, always turn off the wiper switch and allow the wipers to return to the park position before Rotate the end of the lever upward to the third detent turning off the engine.
Page 159: Windshield Washers
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 Windshield Washers To use the washer, pull the lever toward you and hold while spray is desired. If the lever is pulled while in the delay range, the wiper will start and continue to operate for two or three wipe cycles after the lever is released, and then resume the intermittent interval previously selected.
Page 160: Mist Feature
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Mist Feature Push down on the wiper lever to activate a single wipe to clear off road mist or spray from a passing vehicle. As long as the lever is held down, the wipers will continue to operate.
Page 161: Electronic Speed Control - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 Push down on the lever to unlock the steering column. WARNING! With one hand firmly on the steering wheel, move the steering column up or down, as desired. Pull upwards on Do not adjust the steering column while driving. the lever to lock the column firmly in place.
Page 162: To Activate
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Electronic Speed Control buttons are located on the the same time. If this occurs, the Electronic Speed Control right side of the steering wheel. System can be reactivated by pushing the Electronic Speed Control ON/OFF button and resetting the desired vehicle set speed.
Page 163: To Set A Desired Speed
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 To Set A Desired Speed To Resume Speed Turn the Electronic Speed Control ON. When the vehicle To resume a previously set speed, push the RES (+) has reached the desired speed, press the SET (-) button button and release.
Page 164: To Accelerate For Passing
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE decrease until the button is released. Release the button On steep hills, a greater speed loss or gain may occur so when the desired speed is reached, and the new set speed it may be preferable to drive without Electronic Speed will be established.
Page 165 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 The front power outlet is powered from the ignition automatically when ready for use. To preserve the heat- switch. Power is available when the ignition switch is in ing element, do not hold the lighter in the heating the ON or ACC position.
Page 166 164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE On vehicles equipped with a rear subwoofer, there is a third power outlet located in the right rear cargo area. Power Outlet Fuse Locations 1 — M7 Fuse 20 A Yellow Power Outlet Rear with Sub Woofer (Opt.) Rear Power Outlet —...
Page 167 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 WARNING! CAUTION! • Many accessories that can be plugged in draw To avoid serious injury or death: • Only devices designed for use in this type of power from the vehicle’s battery, even when not in use (i.e., mobile phones, etc.).
Page 168: Power Inverter - If Equipped
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! (Continued) • Power outlets are designed for accessory plugs only. Do not hang any type of accessory or acces- sory bracket from the plug. POWER INVERTER — IF EQUIPPED There is a 115 Volt, 150 Watt inverter outlet located on the front of the center console to convert DC current to AC current.
Page 169 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 The power inverter is designed with built-in overload NOTE: When the power inverter switch is pressed, protection. If the power rating of 150 Watts is exceeded, there will be a delay of approximately one second before the power inverter will automatically shut down.
Page 170: Cupholders
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CUPHOLDERS Front Cupholders The front cupholders are located in the center console. Rear Cupholders STORAGE Glovebox Storage The lockable glovebox storage compartment is located on Front Cupholders the passenger side of the lower instrument panel. Pull Rear Cupholders outward on the handle/latch to open the compartment.
Page 171: Console Storage Compartment
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 Console Storage Compartment Rear Storage Compartment To lock or unlock the storage compartment, insert the The rear cargo area storage compartment cover is held by ignition key and turn. To open the storage compartment, a spring-loaded latch.
Page 172: Dual Top - If Equipped
170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Open the rear compartment cover. factory for shipping purposes only. The soft top and the hard top are to be used independently. Removal is mandatory to prevent any possible wear and tear on the soft top.
Page 173 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 • Two Sunrider secure straps (if equipped) • Two rear swing gate brackets 2. Remove the hard top. Refer to “Freedom Top Three- Piece Modular Hard Top — Front/Rear Panel Removal” in this section. 3.
Page 174 172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: To aid in disconnecting the knuckles, you may carefully tap on the knuckles using a rubber mallet. 6. Reinstall the hard top. Refer to “Freedom Top Three- Piece Modular Hard Top — Front/Rear Panel Installa- tion”...
Page 175: Installing The Soft Top
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 • Rear window Installing The Soft Top NOTE: The following procedures are for first time set 2. Remove the hard top. Refer to “Freedom Top Three- up only. For future soft top procedures, refer to “Soft Piece Modular Hard Top —...
Page 176 174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE a. If the pivot brackets have been removed, unzip the b. Lay the soft top into the rear of the vehicle with the sport bar covers and attach the pivot brackets to the bows pointing forward and the curved portion of the sports bar with the four screws that were removed bows facing upward.
Page 177 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 d. Screw the pivot screws back into place using a #T30 CAUTION! Torx head driver. Secure them until they are snug, being careful not to cross-thread the screws or over- Do not overtighten the screws. You can strip the tighten.
Page 178: Freedom Top™ Three-Piece Modular
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE FREEDOM TOP™ THREE-PIECE MODULAR CAUTION! HARD TOP — IF EQUIPPED Failure to follow these cautions may cause interior CAUTION! water damage, stains or mildew: • It is recommended that the top be free of water •...
Page 179: Front Panel(S) Removal
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 Front Panel(s) Removal NOTE: Left panel must be removed before removing right panel. 1. Fold down the sun visor, and move it to the side. 2. Turn the rear fasteners (knobs) (located on the over- head speaker bar assembly) counterclockwise until they can be removed.
Page 180 178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Turn the center L-shaped locks (two) from the center 4. Turn the rear L-shaped lock (located above the shoul- of the roof panel. der belt anchorage).
Page 181: Freedom Top™ Storage Bag
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 5. Unlatch the header panel latch located at the top of the Freedom Top™ Storage Bag windshield. Vehicles equipped with a Freedom Top™ Modular Hard Top, come with a Freedom Top™ storage bag that allows you to store your Freedom Top™...
Page 182 180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Insert the right side Freedom panel into the bag with the latches facing downward. Insert the left-side Freedom panel into the bag with the latches facing upward. Unfold the black panel divider (ensure the divider is laying flat).
Page 183 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 NOTE: Ensure the front Freedom panel latch is closed Unfold the outer flap and zip the Freedom bag closed. prior to inserting the panel into the bag.
Page 184 182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Install the seat attachment strap (at the top of the bag) through the loops. Wrap the upper strap around the rear head restraints and loop the strap through the buckle. Pull on the strap to tighten the Freedom bag securely against the rear seat.
Page 185: Front Panel(S) Installation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 Front Panel(s) Installation NOTE: Set the panels on the windshield frame so that there is no overhang. Also, make sure that the panels are sitting flush with the body. 1. Install the right panel first, then the left panel. 2.
Page 186: Front Panel(S) Installation With Rear Hard Top Removed
184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Front Panel(s) Installation With Rear Hard Top NOTE: The front panel(s) must be positioned properly Removed to ensure sealing. Set the panels on the windshield frame so that there is no overhang. Also, make sure that the 1.
Page 187 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 4. Remove the six Torx head screws that secure the hard 6. Locate the wire harness on the left rear inside corner of top to the vehicle (along the interior bodyside) using a the vehicle.
Page 188 186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 7. Release the red locking tab by pulling outward. Press Tab To Disconnect 9. To remove the washer hose, pinch the grips on hose Red Locking Tab connector and pull downward. 8. To remove the wiring harness press the tab and pull downward to disconnect.
Page 189: Rear Hard Top Installation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 CAUTION! The removal of the Freedom Top requires four adults located on each corner. Failure to follow this caution could damage the Freedom Top. Rear Hard Top Installation NOTE: If the door frames are installed from soft top usage, they must be removed prior to installation of the hard top.
Page 190: Door Frame
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: CAUTION! • The Torx fasteners that attach the hard top to the body should be torqued to 66 in lb +/- 22 in lb (7.5 N·m +/- Failure to follow these cautions may cause interior 2.5 N·m) water damage, stains or mildew: •...
Page 191 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 2. Place one hand on the upper rear and one hand on the front of the door frame. 3. Pull the frame toward you with your rearward hand to remove the frame from the vehicle. WARNING! Use both hands to remove the door frames.
Page 192: Door Frame Installation - Two-Door Models
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Screw the knobs back into the door frame and fold for WARNING! storage. Store in a secure location. Never store the door frames in your vehicle. In an event of an accident, a loose door frame many cause personal injury.
Page 193 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 4. Starting with the front of the door frame, clip it over the metal side bar and then clip the rear, making sure that the material for the side bar covers is not pinched by the door frame.
Page 194: Door Frame Installation - Four-Door Models
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Starting with the front knob, screw in and tighten both Door Frame Installation — Four-Door Models knobs. Repeat on the other side. 1. Install the rear door frame first. 2. Set the door frame pin into the hole on top of the body side, just behind the rear door opening.
Page 195 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 3. Position the top of the door frame against the metal 5. Carefully set the front of the front door frame in the sport bar and press onto the side bar making sure not to rubber seal at the top of the windshield.
Page 196 194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 7. Position the rear of the front door frame to lay on top 9. Tighten the front knob, then the rear most knob, and of the front of the rear door frame. Ensure the seals are then the middle knob.
Page 197: Soft Top - Two-Door Models
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 SOFT TOP — TWO-DOOR MODELS Place the vehicle in a warm area. Pull steadily on the top Please visit the owners section of Jeep.com for instruc- fabric. The vinyl will stretch back to its original size and tional videos.
Page 198 196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! (Continued) WARNING! (Continued) • Refer to “Appearance Care For Fabric Top Models” • The fabric upper doors and fabric top are designed in “Maintaining Your Vehicle” for further infor- only for protection against the elements. Do not mation.
Page 199: Quick Steps To Lowering The Soft Top
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 CAUTION! (Continued) • Careless handling and storage of the soft top may damage the seals, causing water to leak into the vehicle’s interior. • The soft top must be positioned properly to ensure sealing.
Page 200 198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Release header latches from the windshield frame. 4. Open the swing gate and lower the top. 3. Release the Sunrider latch (both sides). NOTE: Ensure fabric does not overhang the sides of the vehicle.
Page 201: Quick Steps To Raising The Soft Top
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 1. Open the swing gate and raise the top, engaging the Sunrider latches (another person may be needed to help with this operation). Quick Steps To Raising The Soft Top Refer to “Raising The Soft Top” in this section for further information.
Page 202 200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Engage header latches.
Page 203 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 3. Install rear corner panels. 4. Install side and back windows.
Page 204: Lowering The Soft Top
202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lowering The Soft Top 1 — Header Bow 6 — Quarter Window 2 — 2–Bow 7 — Check Strap 3 — 3–Bow 8 — Front Retainer — Quarter Window 4 — Sail Panel 9 —...
Page 205 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 1 — Zipper Start 2 — Zipper Finish 3 — Swing Gate Bar 4 — Swing Gate Brackets 5 — Sail Panels...
Page 206 204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Clean side and rear windows before removal to assist in preventing scratching during removal of the soft top. If zippers are difficult to operate due to road dust, etc., clean them with a mild soap solution and a small brush.
Page 207 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 • Unzip the rear window starting at the right lower 5. Before unzipping the rear window, release the first 3 in (7.6 cm) of both sail panels from the channel. Remove the corner of the window. Pull the zipper up, across the swing gate bar by pulling it straight rearward out of the top and down to the left lower corner.
Page 208 206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 6. Remove the rear window retainer from the swing gate 9. Beginning from the rear lower corner, completely bracket on both the left and right sides. unzip the window. 7. Stow the windows carefully to avoid scratching. 10.
Page 209 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 11. Finish releasing the sail panel retainers from the body 12. As you begin to lower the top, fold the sail panels so side channel at the rear corners of the vehicle. that they rest on top of the soft top. NOTE: When releasing the sail panel retainers, it is helpful to pull down on the rear roof bow.
Page 210 208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 13. The swing gate brackets do not need to be removed 14. Completely release the latches from the loops on the unless the hard top is being installed. To remove the windshield frame. If your vehicle is not equipped with swing gate brackets, pull the front of the bracket forward the Sunrider package, proceed to Step 15.
Page 211 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 16. Unlatch the side bows from both door rails (Sun- 17. Before lowering the top, open the swing gate to rider Models only). prevent possible damage to the rear center high-mounted brake light. Move to the front of the vehicle. Grasp the side bow behind the header and lift the top, folding it toward the rear of the vehicle.
Page 212 210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Help from another person will ease this opera- tion. 19. Close the front header latches. 20. Remove the door frames, if desired. Refer to “Door 18. Tuck the fabric and the check straps between the Frame”...
Page 213: Raising The Soft Top
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 211 Raising The Soft Top 4. Standing on the side of the vehicle, lift the top by the side bow and the 2–bow (middle bow) up and over the 1. Unclip and move the sun visors to the side. sports bar until the header rests on the top of the 2.
Page 214 212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Make sure the Sunrider bracket on the side bows 6. Open the header latches and engage the hook on each latches to the door rails (Sunrider Models only). side onto the windshield loops (do not close the latches).
Page 215 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213 7. If the swing gate brackets were removed, install them 8. Move to the rear of the vehicle and gently pull the sail by hooking the rear edge of the bracket on the interior panels over the rear roof bow.
Page 216: Understanding The Features Of Your Vehicle 91
214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 9. Partially install the sail panel retainers into the body 10. To install the side windows, affix the window tem- side channel, leaving the last 3 in (7.6 cm) toward the rear porarily by attaching to the Velcro in the rear corner. window loose (on both sides).
Page 217 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 215 11. Insert the front retainer of the window into the door channel, making sure the retainer is fully seated and properly positioned on the door frame. Failure to do so can result in wind and water leaks or damage to the window.
Page 218 216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 12. Insert the retainer along the bottom edge of the window into the bottom side channel, beginning at the front and working to the rear of the vehicle. Finish by closing the zipper completely and attaching the Velcro along the top and rear of the window.
Page 219 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217 14. Install the rear window by starting both zipper ends at the lower left corner of the rear window opening. Ensure that the zippers are properly started and aligned before zipping to prevent damage.
Page 220 218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 15. Run the zipper fully around to the right side of the 17. Insert the rear window retainer into the swing gate window. bracket on both the left and right sides. 16. Grasp the swing gate bar and position it into the swing gate brackets.
Page 221 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 219 19. Close the header latches and return the sun visors to their secured position. 18. Apply downward pressure on the top corner of the rear soft top bow (3–bow), then complete attaching the sail panel retainers into the body side channel.
Page 222: Soft Top - Four-Door Models
SOFT TOP — FOUR-DOOR MODELS Place the vehicle in a warm area. Pull steadily on the top Please visit the owner’s section of Jeep.com for instruc- fabric. The vinyl will stretch back to its original size and the top can then be snapped into place. If the tempera- tional videos.
Page 223 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 221 CAUTION! (Continued) WARNING! • Do not lower the top with the windows installed. • Do not drive the vehicle with the rear window Window and top damage may occur. curtain up unless the side curtains are also open. •...
Page 224 222 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Do not remove any of the three attachment CAUTION! knobs unless you are planning on installing the hard top. Failure to follow these cautions may cause interior water damage, stains or mildew on the top material: •...
Page 225: Quick Steps For Lowering The Soft Top
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 223 Quick Steps For Lowering The Soft Top 2. Release header latches from the windshield frame. 1. Remove the side and back windows.
Page 226 224 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Fold header rearward, pulling the fabric to the rear.
Page 227 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 225 4. Release Sunrider latch (both sides). 5. Open the swing gate and lower the top. NOTE: Ensure the fabric does not overhang the sides of the vehicle.
Page 228: Quick Steps For Raising The Soft Top
226 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Quick Steps For Raising The Soft Top 1. Open the swing gate and raise the top, engaging the Sunrider latches (another person may be needed to help with this operation).
Page 229 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 227 2. Install rear corner panels. 3. Rotate the header forward.
Page 230 228 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Engage the header latches. 5. Install the side and back windows.
Page 231: Folding Down The Soft Top
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 229 Folding Down The Soft Top 1 — Header Bow 6 — Body Side Retainer 2 — 2–Bow 7 — Quarter Window 3 — 3–Bow 8 — Check Strap 4 — 4–Bow 9 — Front Retainer — Quarter Window 5 —...
Page 232 230 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 1 — Zipper Start 2 — Zipper Finish 3 — Swing Gate Bar 4 — Swing Gate Brackets 5 — Sail Panels...
Page 233 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 231 NOTE: Clean side and rear windows before removal to assist in preventing scratching during removal of the soft top. If zippers are difficult to operate due to road dust, etc., clean them with a mild soap solution and a small brush.
Page 234 232 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Unzip the rear window starting at the right lower 5. Before unzipping the rear window, release the first 3 in (7.6 cm) of both sail panels from the channel. Remove the corner of the window. Pull the zipper up, across the swing gate bar by pulling it straight rearward out of the top and down to the left lower corner.
Page 235 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 233 6. Remove the rear window retainer from the swing gate 9. Beginning from the rear lower corner, completely bracket on both the left and right sides. unzip the window. 7. Stow the windows carefully to avoid scratching. 10.
Page 236 234 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 11. Finish releasing the sail panel retainers from the body 12. Fold the sail panels so that they rest on top of the soft side channel at the rear corners of the vehicle. top.
Page 237 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 235 13. The swing gate brackets do not need to be removed 14. Grasp the front side bow behind the header, and lift unless the hard top is being installed. To remove the the top. swing gate brackets, pull the front of the bracket forward while rolling the entire bracket back in toward the vehicle to disengage.
Page 238 236 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 15. Fold back the front section of the top, pulling the 16. Fold the top so that the material forms a W as fabric rearward. Gently rest the header on top of the rear shown.
Page 239 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 237 17. Release the side bows by pressing down on the latch 18. Before lowering the top, open the swing gate to above the front of the rear door. Push the top rearward to prevent possible damage to the rear center high-mounted disengage.
Page 240 238 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 19. Gently slide the side bows off the door frame track 21. Once the top is fully down, use the Velcro straps and lower the top down into the vehicle. provided to secure the top to the vehicle by wrapping the strap around the side bows and through the slot on the NOTE: Help from another person will ease this opera- body.
Page 241: Putting Up The Soft Top
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 239 Putting Up The Soft Top NOTE: Be extremely careful when putting up the soft top to prevent the doors from getting scratched. It may be helpful to open the rear doors. 1. Install the door frames, if removed. Refer to “Door Frame”...
Page 242 240 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Insert the slider feature of the knuckles into the door frame tracks and slide the top forward. 7. Unclip and move the sun visors to the side. 6. Ensure that the top locks into the Sunrider locking mechanisms that are located above the front of the rear doors.
Page 243 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 241 8. Standing on the side of the vehicle, lift the top by the 9. Open the header latches and engage the hook on each side bow until it rests on the windshield frame. side onto the windshield loops (do not close the latches).
Page 244 242 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 10. If the swing gate brackets were removed, install them 11. Ensure that the straps are positioned correctly before by hooking the rear edge of the bracket on the interior pulling the sail panels over the rear roof bow (4–bow). side of the body channel.
Page 245 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 243 Partially install the sail panel retainers into the body side 12. To install the side windows, affix the window tem- channel, leaving the last 3 in (7.6 cm) toward the rear porarily by attaching it to the Velcro in the upper rear window loose (on both sides).
Page 246 244 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 13. Insert the front retainer of the window into the door channel, making sure the retainer is fully seated and properly positioned on the door frame. Failure to do so can result in wind and water leaks or damage to the window.
Page 247 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 245 14. Insert the retainer along the bottom edge of the window into the bottom side channel, beginning at the front and working to the rear of the vehicle. Finish by closing the zipper completely and attaching the Velcro along the top and rear of the window.
Page 248 246 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 15. Locate the black swing gate bar. Slide the swing gate 16. Install the rear window by starting both zipper ends bar over the receiver at the bottom inside of the rear at the lower left corner of the rear window opening. window.
Page 249 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 247 18. Grasp the swing gate bar and position it into the swing gate brackets. 20. Complete the installation of the sail panel by insert- ing the rest of the retainer into the body channel. 19.
Page 250: Sunrider (Two-Door Models) - If Equipped
248 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 21. Close the header latches and return the sun visors to SUNRIDER (TWO-DOOR MODELS) — IF their secured position. EQUIPPED CAUTION! Operating the top, opening a door or lowering a window while the top is wet may allow water to drip into the vehicle’s interior.
Page 251: Opening The Sunrider
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 249 Opening The Sunrider 3. Slide the plastic sleeve forward. 1. Unclip and move the sun visors to the side. 2. Release the header latches from the loops on the windshield frame. 4. Grasp the header and lift the top back. Make sure the material is folded back as shown.
Page 252: Closing The Sunrider
250 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The Sunrider latch on the door rail should not be activated for Sunrider use. If activated, the soft top must be reinstalled starting from the sail panels. 6. Reposition the sun visors. Closing The Sunrider 1.
Page 253: Sunrider (Four-Door Models) - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 251 4. Hook the header latches to the loops on the wind- Opening The Sunrider shield frame, close latches, and return the sun visors to 1. Unclip and move the sun visors to the side. their original positions.
Page 254 252 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Grasp the front side bow behind the header, and lift 4. Fold back the front section of the top and gently rest the top. the header on top of the rear portion of the deck.
Page 255: Closing The Sunrider
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 253 5. Fold the top so that the material forms a W as shown. Enter the vehicle and move the material into two folds. Closing The Sunrider Perform the above steps in the opposite order. 6.
Page 256: Folding Windshield
254 UNDERSTANDING THE FEATURES OF YOUR VEHICLE FOLDING WINDSHIELD speed of the vehicle be limited to 10 mph (16 km/h), with The fold-down windshield and removable side bars on low range operation preferred if you are driving off-road your vehicle are structural elements that can provide with the windshield folded down.
Page 257: Lowering The Windshield And Removing Side Bars
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 255 WARNING! WARNING! (Continued) • Be sure that you carefully follow the instructions Carefully follow these warnings to help protect for raising the windshield. Make sure that the against personal injury: folding windshield, windshield wipers, side bars, •...
Page 258 256 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: To assist in properly reinstalling side bars, mark 4. Remove the A-pillar cap. the original locations prior to removing. 5. Disconnect microphone (if equipped with Uconnect™ 2. Remove the two top hex bolts (13 mm), and the one phone).
Page 259 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 257 NOTE: Store all of the mounting bolts in their original threaded holes and tighten for safekeeping. 8. Remove the side bar assembly, and reattach the sport bar Velcro covering. 9. To safely store the side bars in your vehicle, use four cinch straps (available from your authorized dealer).
Page 260 258 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 10. Remove the windshield wiper arms by first pulling the wiper away from the windshield and out to the “lock” position. Unsnap the wiper arm nut caps, and remove the retaining nuts. Lift the wiper arms off and store them in the center console or securely behind the rear seat.
Page 261: Raising The Windshield And Replacing Side Bars
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 259 Raising The Windshield And Replacing Side Bars 3. Attach the front of the side bar to the windshield frame. 1. Raise the windshield. • Install the top two hex bolts (13 mm) first, then the 2.
Page 262: Rear Window Features - Hard Top Only
260 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Install the lower windshield plates with the six black REAR WINDOW FEATURES — HARD TOP ONLY round-headed Torx head screws (using a #40 Torx head Rear Window Wiper/Washer — If Equipped driver) on each side of the base of the windshield. A rotary switch on the center portion of the control lever (located on the right side of the steering column) controls the operation of the rear wiper/washer function.
Page 263: Rear Window Defroster - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 261 Rotate the switch upward to the first detent posi- Rear Window Defroster — If Equipped tion for rear wiper operation. The rear window defroster button is located on the bottom right-side of the blower control knob. Rotate the switch upward past the first detent to Press this button to turn on the rear window defroster.
Page 264 262 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: To prevent excessive battery drain, use the rear CAUTION! (Continued) window defroster only when the engine is operating. • Use care when washing the inside of the rear window. Do not use abrasive window cleaners on CAUTION! the interior surface of the window.
Page 265: Understanding Your Instrument Panel
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS Instrument Panel Features ....267 Electronic Vehicle Information Center (EVIC) — If Equipped ....288 Instrument Cluster .
Page 266 264 UNDERSTANDING YOUR INSTRUMENT PANEL Elapsed Time ..... . . 297 Info Button (Disc Mode For MP3/WMA Play) ..315 EVIC Units Selection (Units In Display) .
Page 267 UNDERSTANDING YOUR INSTRUMENT PANEL 265 Notes On Playing MP3 Files ... . 327 iPod /USB/MP3 Control — If Equipped ..346 Operation Instructions - Auxiliary Mode ..329 Connecting The iPod Or External USB Device .
Page 268 266 UNDERSTANDING YOUR INSTRUMENT PANEL CD/DVD Disc Maintenance ....354 Automatic Temperature Control (ATC) — If Equipped ......359 Radio Operation And Mobile Phones .
Page 269: Instrument Panel Features
UNDERSTANDING YOUR INSTRUMENT PANEL 267 INSTRUMENT PANEL FEATURES 1 — Air Outlet 7 — Climate Controls 2 — Instrument Cluster 8 — Power Outlet 3 — Radio 9 — Lower Switch Bank 4 — Assist Handle 10 — Power Mirror Switch — If Equipped 5 —...
Page 270: Instrument Cluster
268 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER...
Page 271: Instrument Cluster Descriptions
UNDERSTANDING YOUR INSTRUMENT PANEL 269 INSTRUMENT CLUSTER DESCRIPTIONS If jump starting is required, refer to “Jump Starting Procedures” in “What To Do In Emergencies”. 1. Fuel Gauge The pointer shows the level of fuel in the fuel tank when 3. Front Fog Light Indicator — If Equipped the ignition switch is in the ON/RUN position.
Page 272 270 UNDERSTANDING YOUR INSTRUMENT PANEL 7. Seat Belt Reminder Light 9. Oil Pressure Warning Light When the ignition switch is first turned to ON/ This light indicates low engine oil pressure. The RUN, this light will turn on for four to eight light should turn on momentarily when the engine seconds as a bulb check.
Page 273 UNDERSTANDING YOUR INSTRUMENT PANEL 271 or park lights are left on, the high beam indicator light booster, the ABS pump will run when applying the brake will remain illuminated and a chime will sound. and a brake pedal pulsation may be felt during each stop. 11.
Page 274 272 UNDERSTANDING YOUR INSTRUMENT PANEL The light also will turn on when the parking brake is WARNING! applied with the ignition switch in the ON/RUN posi- tion. Driving a vehicle with the red brake light on is dangerous. Part of the brake system may have failed. NOTE: This light shows only that the parking brake is It will take longer to stop the vehicle.
Page 275 UNDERSTANDING YOUR INSTRUMENT PANEL 273 13. Air Bag Warning Light CAUTION! This light will turn on for four to eight seconds as a bulb check when the ignition switch is first Do not operate the engine with the tachometer turned to ON/RUN. If the light is either not on pointer in the red area.
Page 276 274 UNDERSTANDING YOUR INSTRUMENT PANEL 17. Vehicle Security Light — If Equipped CAUTION! This light will flash at a fast rate for approxi- mately 15 seconds, when the vehicle security Driving with a hot engine cooling system could alarm is arming, and then will flash slowly damage your vehicle.
Page 277 UNDERSTANDING YOUR INSTRUMENT PANEL 275 21. Odometer / Trip Odometer / ECO (Fuel Saver WARNING! Indicator) Button Press this button to change the display from odometer to A hot engine cooling system is dangerous. You or either of the two trip odometer settings or the “ECO” others could be badly burned by steam or boiling display.
Page 278 276 UNDERSTANDING YOUR INSTRUMENT PANEL has tires of a different size than the size indicated on the maintain correct tire pressure, even if under-inflation has vehicle placard or tire inflation pressure label, you should not reached the level to trigger illumination of the TPMS determine the proper tire inflation pressure for those low tire pressure telltale.
Page 279 UNDERSTANDING YOUR INSTRUMENT PANEL 277 tires or wheels on your vehicle, to ensure that the 24. Odometer / Trip Odometer Display Area replacement or alternate tires and wheels allow the TPMS The odometer display shows the total distance the vehicle to continue to function properly.
Page 280 278 UNDERSTANDING YOUR INSTRUMENT PANEL Vehicle Odometer Messages LoW tirE When the appropriate conditions exist, the following When the appropriate condition exists, the odometer odometer messages will display: display will toggle between LoW and tirE for three cycles. ECO ..... . Fuel Saver Indicator “HOTOIL”...
Page 281 UNDERSTANDING YOUR INSTRUMENT PANEL 279 area. Tighten the fuel filler cap properly and press the CAUTION! TRIP ODOMETER button to turn off the message. If the problem continues, the message will appear the next time Continuous driving with the Transmission Tempera- the vehicle is started.
Page 282 280 UNDERSTANDING YOUR INSTRUMENT PANEL means the engine oil change interval may fluctuate 25. Malfunction Indicator Light (MIL) dependent upon your personal driving style. The Malfunction Indicator Light (MIL) is a part of an Onboard Diagnostic System called OBD II that Unless reset, this message will continue to display each monitors engine and automatic transmission con- time you turn the ignition switch to the ON/RUN...
Page 283 UNDERSTANDING YOUR INSTRUMENT PANEL 281 26. Electronic Stability Control (ESC) Activation/ CAUTION! Malfunction Indicator Light — If Equipped The “ESC Activation/Malfunction Indicator Prolonged driving with the MIL on could cause Light” in the instrument cluster will come on damage to the engine control system. It also could when the ignition switch is turned to the affect fuel economy and drivability.
Page 284 282 UNDERSTANDING YOUR INSTRUMENT PANEL • Each time the ignition is turned to ON/RUN, the ESC 27. O/D (Overdrive) OFF Indicator Light system will be ON, even if it was turned off previously. This light will illuminate when the O/D OFF button has been selected and overdrive has been •...
Page 285 UNDERSTANDING YOUR INSTRUMENT PANEL 283 30. Electronic Throttle Control (ETC) Light and remain on briefly as a bulb check. If the light does not This light informs you of a problem with the come on during starting, have the system checked by an Electronic Throttle Control (ETC) system.
Page 286: Compass And Trip Computer - If Equipped
284 UNDERSTANDING YOUR INSTRUMENT PANEL COMPASS AND TRIP COMPUTER — IF Control Buttons EQUIPPED The Compass/Temperature control buttons are located The Compass/Trip Computer features a driver- on the left spoke of the steering wheel. interactive display (displays information on outside tem- perature, compass direction, and trip information).
Page 287: Compass/Temperature Display
UNDERSTANDING YOUR INSTRUMENT PANEL 285 NOTE: The system will display the last known outside Compass/Temperature Display temperature when starting the vehicle and may need to NOTE: If the vehicle is equipped with a Chrysler be driven several minutes before the updated tempera- Uconnect™...
Page 288 286 UNDERSTANDING YOUR INSTRUMENT PANEL • Magnetic materials should be kept away from the top button on the steering wheel (for approximately ten of the center of the instrument panel. This is where the seconds) until the current variance zone number is dis- compass sensor is located.
Page 289: Trip Conditions
UNDERSTANDING YOUR INSTRUMENT PANEL 287 • Distance To Empty (DTE) 3. Release the RESET button, then press and hold again for approximately 10 seconds, until the direction is Shows the estimated distance that can be traveled with displayed, with the CAL indicator on continuously in the the fuel remaining in the tank.
Page 290: Electronic Vehicle Information Center (Evic) - If Equipped
288 UNDERSTANDING YOUR INSTRUMENT PANEL or to ECO. Press and hold the right button while the Trip B odometer/trip odometer is displayed to reset. Shows the total distance traveled for trip B since the last reset. ECO (Fuel Saver Indicator) — If Equipped The ECO indicator will illuminate when you are driving in a fuel efficient manner and can be used to modify driving habits in order to increase fuel economy.
Page 291 UNDERSTANDING YOUR INSTRUMENT PANEL 289 This system conveniently allows the driver to select a variety of useful information by pressing the switches mounted on the steering wheel. The EVIC consists of the following: • Compass Heading (N, S, E, W, NE, NW, SE, SW) •...
Page 292 290 UNDERSTANDING YOUR INSTRUMENT PANEL The system allows the driver to select information by MENU Button pressing the following buttons mounted on the steering Press and release the MENU button to advance wheel: the display to each of the EVIC Main Menu features or to return to the Main Menu from a sub-menu.
Page 293: Electronic Vehicle Information Center (Evic) Displays
UNDERSTANDING YOUR INSTRUMENT PANEL 291 • Turn Signal On (with a continuous warning chime) SELECT Button Press and release the SELECT button when • Left Front Turn Signal Lamp Out (with a single chime) prompted by the EVIC to Reset Main Menu •...
Page 294: Oil Change Required
292 UNDERSTANDING YOUR INSTRUMENT PANEL • Doors Ajar (with vehicle graphic showing which doors indicator system is duty cycle based, which means the are open. A single chime sounds if the vehicle is in engine oil change interval may fluctuate dependent upon motion).
Page 295: Evic Main Menu
UNDERSTANDING YOUR INSTRUMENT PANEL 293 EVIC Main Menu NOTE: For features in the EVIC that can be reset To step to each main menu feature press and release the (Average Fuel Economy and Elapsed Time), the EVIC MENU button once for each step. A step from the last prompts a reset with a SELECT button graphic and the item in the list will cause the first item in the feature list word RESET next to it.
Page 296 294 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The system will display the last known outside Automatic Compass Calibration temperature when starting the vehicle and may need to This compass is self-calibrating, which eliminates the be driven several minutes before the updated tempera- need to set the compass manually.
Page 297 UNDERSTANDING YOUR INSTRUMENT PANEL 295 Manual Compass Calibration 5. Complete one or more 360–degree turns (in an area If the compass appears erratic and the “CAL” indicator free from large metal or metallic objects) until the “CAL” does not appear in the EVIC display, you must put the indicator turns off.
Page 298: Average Fuel Economy
296 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Magnetic materials should be kept away from 2. Press the MENU button until Personal Settings the top of the instrument panel; this is where the compass (Customer-Programmable Features) displays in the sensor is located. EVIC.
Page 299: Distance To Empty (Dte)
UNDERSTANDING YOUR INSTRUMENT PANEL 297 Distance To Empty (DTE) Elapsed Time Shows the estimated distance that can be traveled with Shows the total elapsed time of travel since the last reset. the fuel remaining in the tank. This estimated distance is Elapsed time will increment when the ignition switch is determined by a weighted average of the instantaneous in the RUN or START position.
Page 300: System Status
298 UNDERSTANDING YOUR INSTRUMENT PANEL System Status Use the DOWN button to display one of the following choices: Displays SYSTEM OK if there are no active Warning Messages stored. Pressing and releasing the DOWN Language button when SYSTEM OK is displayed will do nothing. When in this display you may select one of five lan- Displays SYSTEM WARNINGS PRESENT if there are guages for all display nomenclature, including the trip...
Page 301 UNDERSTANDING YOUR INSTRUMENT PANEL 299 Entry (RKE) transmitter UNLOCK button. When Driver without the Sound Horn with Lock feature selected. To Door 1st Press is selected, you must press the RKE make your selection, press and release the SELECT transmitter UNLOCK button twice to unlock the passen- button until “On”...
Page 302 300 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Turning the headlights on during the daytime unlocked with the RKE transmitter. To make your selec- causes the instrument panel lights to dim. To increase the tion, press and hold the SELECT button until “Off,” brightness, refer to “Lights”...
Page 303: Media Center 230 (Req) - Am/Fm Stereo Radio And 6-Disc Cd/Dvd Changer (Mp3/Wma Aux Jack)
UNDERSTANDING YOUR INSTRUMENT PANEL 301 the EVIC. To make your selection, press and release the MEDIA CENTER 230 (REQ) — AM/FM STEREO SELECT button until “On” or “Off” appears. RADIO AND 6–DISC CD/DVD CHANGER (MP3/WMA AUX JACK) Display Fuel Saver — If Equipped The “ECO”...
Page 304: Operating Instructions - Radio Mode
302 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions - Radio Mode to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make NOTE: The ignition switch must be in the ON or ACC another selection.
Page 305 UNDERSTANDING YOUR INSTRUMENT PANEL 303 If your vehicle is not equipped with or this feature is not Clock Setting Procedure available on your vehicle, a “Not Equipped With 1. Press and hold the TIME button until the hours blink. Uconnect Phone” message will display on the radio screen.
Page 306 304 UNDERSTANDING YOUR INSTRUMENT PANEL INFO Button Push the rotary TUNE/SCROLL control knob a second Press the INFO button for an RDS station (one with call time and MID will display. Turn the TUNE/SCROLL letters displayed). The radio will return a Radio Text control knob to the right or left to increase or decrease the message broadcast from an FM station (FM mode only).
Page 307 UNDERSTANDING YOUR INSTRUMENT PANEL 305 Push the rotary TUNE/SCROLL control knob again to Program Type 16-Digit Character Display exit setting tone, balance, and fade. College College MUSIC TYPE Button Country Country Pressing this button once will turn on the Music Type Foreign Language Language mode for five seconds.
Page 308 306 UNDERSTANDING YOUR INSTRUMENT PANEL SETUP Button Program Type 16-Digit Character Display Pressing the SETUP button allows you to select between Soft Rhythm and Blues Soft R & B the following items: Sports Sports NOTE: Turn the TUNE/SCROLL control knob to scroll Talk Talk through the entries.
Page 309 UNDERSTANDING YOUR INSTRUMENT PANEL 307 • DVD Play Options - Selecting the DVD Play Options • VES™ Power - Allows you to turn VES™ ON and will display the following: OFF (if equipped). • Subtitle – Repeatedly pressing SELECT will switch •...
Page 310 308 UNDERSTANDING YOUR INSTRUMENT PANEL Menu Language — If Equipped Subtitle Language — If Equipped Selecting this item will allow the user to choose the Selecting this item allows you to choose a default subtitle default startup DVD menu language (effective only if language (effective only if the language is supported by language supported by disc).
Page 311 UNDERSTANDING YOUR INSTRUMENT PANEL 309 AutoPlay — If Equipped and press and release that button. If a button is not When this is set to On and a DVD video is inserted, it will selected within five seconds after pressing the SET but- bypass the DVD menu screen and automatically play the ton, the station will continue to play but will not be movie.
Page 312: Operation Instructions - (Disc Mode For Cd And Mp3/Wma Audio Play, Dvd-Video)
310 UNDERSTANDING YOUR INSTRUMENT PANEL Buttons 1 - 6 CAUTION! These buttons tune the radio to the stations that you commit to pushbutton memory {12 AM, 12 FM, and 12 The radio may shut down during extremely hot Satellite (if equipped) stations}. conditions.
Page 313 UNDERSTANDING YOUR INSTRUMENT PANEL 311 Radio display will show LOADING DISC when the disc The disc can be ejected with the radio and ignition OFF. is loading and “READING DISC” when the radio is SEEK Button (CD MODE) reading the disc. Press the right SEEK button for the next selection on the CD.
Page 314: Notes On Playing Mp3/Wma Files
312 UNDERSTANDING YOUR INSTRUMENT PANEL RW/FF (CD MODE) Supported Medium Formats (File Systems) Press and hold FF (Fast Forward) and the CD player will The medium formats supported by the radio are ISO 9660 begin to fast forward until FF is released, or RW or Level 1 and Level 2 and includes the Joliet extension.
Page 315 UNDERSTANDING YOUR INSTRUMENT PANEL 313 Multisession disc formats are supported by the radio. When using the MP3/WMA encoder to compress audio Multisession discs may contain combinations of normal data to an MP3/WMA file, the bit rate and sampling CD audio tracks and computer files (including MP3/ frequencies in the following table are supported.
Page 316: List Button (Disc Mode For Mp3/Wma Play)
314 UNDERSTANDING YOUR INSTRUMENT PANEL • Number of files and folders - Loading times will ID3 Tag information for artist, song title, and album title are supported for ID3 version 1 tags. ID3 version 2 is not increase with more files and folders supported by the radios.
Page 317: Info Button (Disc Mode For Mp3/Wma Play)
UNDERSTANDING YOUR INSTRUMENT PANEL 315 INFO Button (DISC Mode for MP3/WMA Play) Pressing the AUX button will change the mode to auxil- Pressing the INFO button repeatedly will scroll through iary device if the AUX jack is connected. the following TAG information: Song Title, Artist, File NOTE: The AUX device must be turned on and the Name, and Folder Name (if available).
Page 318 316 UNDERSTANDING YOUR INSTRUMENT PANEL TIME Button (Auxiliary Mode) Operating Instructions - Video Entertainment Press the TIME button to change the display from System (VES)™ (If Equipped) elapsed playing time to time of day. The time of day will Refer to “Video Entertainment System (VES)™” for fur- display for five seconds.
Page 319: Uconnect™ Multimedia (Satellite Radio) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 317 DTS™ radio system in your vehicle. Sirius will supply a wel- DTS™ and DTS™ 2.0 are trademarks of Digital The- come kit that contains general information, including ater Systems, Inc. how to setup your on-line listening account. For further information, call the toll-free number 888-539-7474, or Uconnect™...
Page 320 318 UNDERSTANDING YOUR INSTRUMENT PANEL using the TUNE/SCROLL control knob until Sirius ID is Reception Quality selected. Press the TUNE/SCROLL control knob and the Satellite reception may be interrupted due to one of the Sirius ID number will display. The Sirius ID number following reasons: display will time out in two minutes.
Page 321 UNDERSTANDING YOUR INSTRUMENT PANEL 319 SEEK Buttons RW/FF Press and release the SEEK buttons to search for the next Pressing the RW (Rewind) or FF (Fast Forward) buttons channel in Satellite mode. Press the right switch to seek causes the tuner to search for the next channel in the up and the left switch to seek down.
Page 322 320 UNDERSTANDING YOUR INSTRUMENT PANEL By pressing the SEEK button when the Music Type Select the button (1-6) you wish to lock onto this channel function is active, the radio will be tuned to the next and press and release that button. If a button is not channel with the same selected Music Type name.
Page 323: Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 321 MEDIA CENTER 730N/430/430N (RHR/RER/RBZ/ MEDIA CENTER 130 (SALES CODE RES) RHB) CD/DVD/HDD/NAV — IF EQUIPPED NOTE: The radio sales code is located on the lower right NOTE: The sales code is located on the lower right side side of the radio faceplate.
Page 324: Operating Instructions - Radio Mode
322 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions — Radio Mode to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make NOTE: The ignition switch must be in the ON/RUN or another selection.
Page 325 UNDERSTANDING YOUR INSTRUMENT PANEL 323 4. Adjust the minutes using the right side TUNE/ Push the rotary TUNE/SCROLL control knob a second SCROLL control knob. Press the TUNE/SCROLL control time and MID will display. Turn the TUNE/SCROLL knob to save time change. control knob to the right or left to increase or decrease the mid-range tones.
Page 326 324 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob again to You may add a second station to each pushbutton by exit setting tone, balance, and fade. repeating the above procedure with this exception: Press the SET/RND button twice and SET 2 will show in the AM/FM Button display window.
Page 327: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
UNDERSTANDING YOUR INSTRUMENT PANEL 325 Operation Instructions — CD MODE For CD And If you insert a disc with the ignition ON/RUN and the MP3 Audio Play radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display NOTE: will show the track number, and index time in minutes •...
Page 328 326 UNDERSTANDING YOUR INSTRUMENT PANEL EJECT Button - Ejecting a CD the current selection. Pressing and holding the SEEK Press the EJECT button to eject the CD. button will allow faster scrolling through the tracks in CD and MP3 modes. TIME Button Press this button to change the display from a large CD If you have ejected a disc and have not removed it within...
Page 329: Notes On Playing Mp3 Files
UNDERSTANDING YOUR INSTRUMENT PANEL 327 SET/RND Button (Random Play Button) Supported Medium Formats (File Systems) Press this button while the CD is playing to activate The medium formats supported by the radio are ISO 9660 Random Play. This feature plays the selections on the Level 1 and Level 2 and includes the Joliet extension.
Page 330 328 UNDERSTANDING YOUR INSTRUMENT PANEL • Maximum number of characters in file/folder names: When using the MP3 encoder to compress audio data to an MP3 file, the bit rate and sampling frequencies in the • Level 1: 12 (including a separator . and a three- following table are supported.
Page 331: Operation Instructions - Auxiliary Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 329 Playlist files are not supported. MP3 Pro files are not To increase the speed of disc loading, it is recommended supported. to use CD-R media and single-session discs. To create a single-session disc, enable the “Disc at Once” option Playback of MP3 Files before writing to the disc.
Page 332: Media Center 130 With Satellite Radio (Sales Code Res+Rsc)
330 UNDERSTANDING YOUR INSTRUMENT PANEL TIME Button (Auxiliary Mode) Press this button to change the display to time of day. The time of day will display for five seconds (when ignition is OFF). MEDIA CENTER 130 WITH SATELLITE RADIO (SALES CODE RES+RSC) NOTE: The radio sales code is located on the lower right side of the radio faceplate.
Page 333 UNDERSTANDING YOUR INSTRUMENT PANEL 331 Power Switch/Volume Control (Rotary) Voice Command System (Radio) — If Equipped Push the ON/VOLUME control knob to turn on the Refer to “Voice Command” in “Understanding The Fea- radio. Push the ON/VOLUME control knob a second tures Of Your Vehicle”.
Page 334 332 UNDERSTANDING YOUR INSTRUMENT PANEL If your vehicle is not equipped with or this feature is not 4. Adjust the minutes using the right side TUNE/ available on your vehicle, a “Not Equipped With SCROLL control knob. Press the TUNE/SCROLL control Uconnect Phone”...
Page 335 UNDERSTANDING YOUR INSTRUMENT PANEL 333 RW/FF Push the rotary TUNE/SCROLL control knob a third Pressing the RW (Rewind) or FF (Fast Forward) buttons time and TREBLE will display. Turn the TUNE/SCROLL causes the tuner to search for the next frequency in the control knob to the right or left to increase or decrease the direction of the arrows.
Page 336 334 UNDERSTANDING YOUR INSTRUMENT PANEL or turning the TUNE/SCROLL control knob within five Program Type 16-Digit Character Display seconds will allow the program format type to be se- News News lected. Many radio stations do not currently broadcast Nostalgia Nostalga Music Type information.
Page 337 UNDERSTANDING YOUR INSTRUMENT PANEL 335 By pressing the SEEK button when the Music Type icon the minutes using the right side TUNE/SCROLL is displayed, the radio will be tuned to the next frequency control knob. Press the TUNE/SCROLL control knob station with the same selected Music Type name.
Page 338: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
336 UNDERSTANDING YOUR INSTRUMENT PANEL You may add a second station to each pushbutton by Operation Instructions — CD MODE for CD and repeating the above procedure with this exception: Press MP3 Audio Play the SET/RND button twice and SET 2 will show in the NOTE: display window.
Page 339 UNDERSTANDING YOUR INSTRUMENT PANEL 337 If you insert a disc with the ignition ON and the radio EJECT Button - Ejecting a CD ON, the unit will switch from radio to CD mode and Press the EJECT button to eject the CD. begin to play when you insert the disc.
Page 340: Notes On Playing Mp3 Files
338 UNDERSTANDING YOUR INSTRUMENT PANEL the current selection. Pressing and holding the SEEK SET/RND Button (Random Play Button) button will allow faster scrolling through the tracks in Press this button while the CD is playing to activate CD and MP3 modes. Random Play.
Page 341 UNDERSTANDING YOUR INSTRUMENT PANEL 339 • Maximum number of characters in file/folder names: Supported Medium Formats (File Systems) The medium formats supported by the radio are ISO 9660 • Level 1: 12 (including a separator . and a three- Level 1 and Level 2 and includes the Joliet extension. character extension) When reading discs recorded using formats other than •...
Page 342 340 UNDERSTANDING YOUR INSTRUMENT PANEL When using the MP3 encoder to compress audio data to Playlist files are not supported. MP3 Pro files are not an MP3 file, the bit rate and sampling frequencies in the supported. following table are supported. In addition, variable bit Playback of MP3 Files rates (VBR) are also supported.
Page 343: List Button (Cd Mode For Mp3 Play)
UNDERSTANDING YOUR INSTRUMENT PANEL 341 To increase the speed of disc loading, it is recommended Press the INFO button once more to return to elapsed to use CD-R media and single-session discs. To create a time priority mode. single-session disc, enable the “Disc at Once” option Press and hold the INFO button for three seconds or before writing to the disc.
Page 344: Uconnect™ Multimedia (Satellite Radio) - If Equipped
342 UNDERSTANDING YOUR INSTRUMENT PANEL is not loud enough, turn the device’s volume up. If the System Activation AUX audio sounds distorted, turn the device’s volume Sirius Satellite Radio service is pre-activated, and you down. may begin listening immediately to the one year of audio service that is included with the factory-installed satellite TIME Button (Auxiliary Mode) radio system in your vehicle.
Page 345 UNDERSTANDING YOUR INSTRUMENT PANEL 343 To access the ESN/SID, refer to the following steps: bikes should be placed as far rearward as possible, within the loading design of the rack. Do not place items directly ESN/SID Access on or above the antenna. With the ignition switch in the ON/RUN or ACC posi- tion and the radio on, press the SETUP button and scroll Reception Quality...
Page 346 344 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions - Uconnect™ Multimedia INFO Button (Satellite) Mode Pressing the INFO button will cycle the display informa- tion between Artist, Song Title, and Composer (if avail- NOTE: The ignition switch must be in the ON/RUN or able).
Page 347 UNDERSTANDING YOUR INSTRUMENT PANEL 345 or turning the TUNE/SCROLL control knob within five SET Button – To Set the Pushbutton Memory seconds will allow the program format type to be selected. When you are receiving a channel that you wish to commit to pushbutton memory, press the SET button.
Page 348: Ipod /Usb/Mp3 Control - If Equipped
346 UNDERSTANDING YOUR INSTRUMENT PANEL Every time a preset button is used, a corresponding This feature allows an iPod or external USB device to be button number will display. plugged into the USB port, located in the center console. Buttons 1 - 6 iPod control supports Mini, 4G, Photo, Nano, 5G iPod These buttons tune the radio to the channels that you and iPhone devices.
Page 349: Connecting The Ipod Or External Usb Device
UNDERSTANDING YOUR INSTRUMENT PANEL 347 Connecting The iPod Or External USB Device Once the audio device is connected and synchronized to Use the connection cable to connect an iPod or external the vehicle’s iPod /USB/MP3 control system (iPod or USB device to the vehicle’s USB/AUX connector port external USB device may take a few minutes to connect), which is located in the center console.
Page 350: Controlling The Ipod Or External Usb Device Using Radio Buttons
348 UNDERSTANDING YOUR INSTRUMENT PANEL • The audio device can be controlled using the radio Play Mode buttons to Play, Browse, and List the iPod contents. When switched to iPod /USB/MP3 control mode, the iPod or external USB device automatically starts Play •...
Page 351 UNDERSTANDING YOUR INSTRUMENT PANEL 349 • Jump backward in the current track by pressing and to the next screen of data for that track. Once all holding the << RW button. Holding the << RW screens have been viewed, the last INFO button press button long enough will jump to the beginning of will go back to the play mode screen on the radio.
Page 352: List Or Browse Mode
350 UNDERSTANDING YOUR INSTRUMENT PANEL device, or press the VR button and say Shuffle ON or fast will scroll through the list faster. During fast Shuffle Off . If the RND icon is showing on the radio scroll, a slight delay in updating the information on display, then the shuffle mode is ON.
Page 353 UNDERSTANDING YOUR INSTRUMENT PANEL 351 • Preset 6 – Podcasts CAUTION! • Pressing a PRESET button will display the current • Leaving the iPod or external USB device (or any list on the top line and the first item in that list on supported device) anywhere in the vehicle in the second line.
Page 354: Bluetooth Streaming Audio (Btsa)
352 UNDERSTANDING YOUR INSTRUMENT PANEL Bluetooth Streaming Audio (BTSA) 2. After the Ready prompt and the following beep, say Music can be streamed from your cellular phone to the Setup , then Select Audio Devices . Uconnect™ phone system. 3. Say the name of the audio device or ask the Controlling BTSA Using Radio Buttons Uconnect™...
Page 355: Steering Wheel Audio Controls
UNDERSTANDING YOUR INSTRUMENT PANEL 353 STEERING WHEEL AUDIO CONTROLS The right-hand control is a rocker-type switch with a The remote sound system controls are located on the rear pushbutton in the center and controls the volume and surface of the steering wheel. Reach behind the wheel to mode of the sound system.
Page 356: Cd Player
354 UNDERSTANDING YOUR INSTRUMENT PANEL The button located in the center of the left-hand control CD/DVD DISC MAINTENANCE will tune to the next preset station that you have pro- To keep a CD/DVD in good condition, take the following grammed in the radio preset pushbutton. precautions: CD Player 1.
Page 357: Radio Operation And Mobile Phones
UNDERSTANDING YOUR INSTRUMENT PANEL 355 NOTE: If you experience difficulty in playing a particu- Manual Heating And Air Conditioning lar disc, it may be damaged (i.e., scratched, reflective coating removed, a hair, moisture or dew on the disc) oversized, or have protection encoding. Try a known good disc before considering disc player service.
Page 358 356 UNDERSTANDING YOUR INSTRUMENT PANEL Blower Control NOTE: If your air conditioning performance seems Rotate this control to regulate the lower than expected, check the front of the A/C con- amount of air forced through the ven- denser located in front of the radiator for an accumula- tilation system in any mode.
Page 359 UNDERSTANDING YOUR INSTRUMENT PANEL 357 Panel Floor Air is directed through the outlets in the instrument Air is directed through the floor outlets with a panel. These outlets can be adjusted to direct airflow. small amount flowing through the defrost and side window demist outlets.
Page 360 358 UNDERSTANDING YOUR INSTRUMENT PANEL Conditioning (A/C) button is not pressed. This dehu- because of moisture buildup inside the vehicle. Select midifies the air to help dry the windshield. To improve the outside air position for maximum defogging. fuel economy, use these modes only when necessary. •...
Page 361: Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 359 temperatures, while rotating right into the red area Automatic Temperature Control (ATC) — If indicates warmer temperatures. Equipped NOTE: The air conditioning compressor will not engage until the engine has been running for about 10 seconds. •...
Page 362 360 UNDERSTANDING YOUR INSTRUMENT PANEL Automatic Operation the desired comfort level require air conditioning, the The Automatic Temperature Control system automati- system will automatically make the adjustment. cally maintains the climate in the cabin of the vehicle at You will experience the greatest efficiency by simply the comfort levels desired by the driver and passenger.
Page 363 UNDERSTANDING YOUR INSTRUMENT PANEL 361 • If your air conditioning performance seems lower than Manual Operation expected, check the front of the A/C condenser located This system offers a full complement of manual override in front of the radiator for an accumulation of dirt or features, which consist of Blower Preferred Automatic, insects.
Page 364 362 UNDERSTANDING YOUR INSTRUMENT PANEL...
Page 365 UNDERSTANDING YOUR INSTRUMENT PANEL 363 • Floor The operator can override the AUTO mode setting to change airflow distribution by rotating the Mode Control Air is directed through the floor outlets with a knob (on the right) to one of the following positions. small amount flowing through the defrost and side window demist outlets.
Page 366 364 UNDERSTANDING YOUR INSTRUMENT PANEL • Air Conditioner Control NOTE: • When the ignition switch is turned to the LOCK Press this button to turn on the air conditioning during manual operation position, the recirculation feature will be cancelled. only. When the air conditioning is •...
Page 367: Operating Tips
UNDERSTANDING YOUR INSTRUMENT PANEL 365 • Most of the time, when in Automatic Operation, you Summer Operation can temporarily put the system into Recirculation The engine cooling system in air-conditioned vehicles mode by pressing the Recirculation button. However, must be protected with a high-quality antifreeze coolant under certain conditions, while in Automatic mode, to provide proper corrosion protection and to protect the system is blowing air out the defrost vents.
Page 368 366 UNDERSTANDING YOUR INSTRUMENT PANEL Window Fogging Outside Air Intake Interior fogging on the windshield can be quickly re- Make sure the air intake, located directly in front of the moved by turning the mode selector to Defrost. The windshield, is free of obstructions such as leaves. Leaves Defrost/Floor mode can be used to maintain a clear collected in the air intake may reduce airflow, and if they windshield and provide sufficient heating.
Page 369 UNDERSTANDING YOUR INSTRUMENT PANEL 367 Control Setting Suggestions For Various Weather Conditions...
Page 371 STARTING AND OPERATING CONTENTS Starting Procedures ....374 Manual Transmission — If Equipped ..378 Manual Transmission –...
Page 372 370 STARTING AND OPERATING Four–Wheel Drive Operation Simultaneous Brake And (Command-Trac I Or Rock-Trac ) ..392 Throttle Operation ....403 Operating Instructions/Precautions .
Page 373 STARTING AND OPERATING 371 Brake Assist System (BAS) ....420 Tires — General Information ... . . 444 Hill Start Assist (HSA) .
Page 374 372 STARTING AND OPERATING Replacement Tires ....451 Materials Added To Fuel ....463 Tire Chains .
Page 375 STARTING AND OPERATING 373 Trailer Towing Weights Recreational Towing (Maximum Trailer Weight Ratings) ..474 (Behind Motorhome, Etc.) ....485 Trailer And Tongue Weight .
Page 376: Starting Procedures
374 STARTING AND OPERATING STARTING PROCEDURES Manual Transmission – If Equipped Before starting your vehicle, adjust your seat, adjust both Apply the parking brake, place the shift lever in NEU- inside and outside mirrors, and fasten your seat belts. TRAL, and press the clutch pedal before starting the vehicle.
Page 377: Normal Starting
STARTING AND OPERATING 375 Normal Starting Extreme Cold Weather (Below –20°F Or –29°C) To ensure reliable starting at these temperatures, use of NOTE: Normal starting of either a cold or a warm an externally-powered electric engine block heater (avail- engine is obtained without pumping or pressing the able from your authorized dealer) is recommended.
Page 378 376 STARTING AND OPERATING the way to the floor and hold it there while cranking the WARNING! (Continued) engine. This should clear any excess fuel in case the • Do not attempt to push or tow your vehicle to get engine is flooded.
Page 379: After Starting
STARTING AND OPERATING 377 If the engine shows no sign of starting after two 15– CAUTION! second periods of cranking with the accelerator pedal held to the floor, repeat the “Normal Starting” or “Ex- To prevent damage to the starter, wait 10 to 15 sec- treme Cold Weather”...
Page 380: Manual Transmission - If Equipped
378 STARTING AND OPERATING WARNING! CAUTION! Remember to disconnect the engine block heater Never drive with your foot resting on the clutch cord before driving. Damage to the 110-115 Volt AC pedal, or attempt to hold the vehicle on a hill with the electrical cord could cause electrocution.
Page 381: Shifting
STARTING AND OPERATING 379 Recommended Vehicle Shift Speeds To utilize your manual transmission efficiently for both fuel economy and performance, it should be upshifted as listed in recommended shift speed chart. Shift at the vehicle speeds listed for acceleration. When heavily loaded or pulling a trailer these recommended up-shift speeds may not apply.
Page 382: Downshifting
380 STARTING AND OPERATING Downshifting CAUTION! Moving from a high gear down to a lower gear is When descending a hill, be very careful to downshift recommended to preserve brakes when driving down one gear at a time to prevent overspeeding the engine steep hills.
Page 383: Reverse Shifting
STARTING AND OPERATING 381 Reverse Shifting Manual Transmission Downshift Speeds in MPH To shift into REVERSE, bring the vehicle to a complete (KM/H) stop. Press the clutch and pause briefly to allow the gear Gear train to stop rotating. Beginning from the NEUTRAL Selec- 6 to 5 5 to 4...
Page 384: Automatic Transmission - If Equipped
382 STARTING AND OPERATING AUTOMATIC TRANSMISSION — IF EQUIPPED WARNING! • Unintended movement of a vehicle could injure CAUTION! those in or near the vehicle. As with all vehicles, Damage to the transmission may occur if the follow- you should never exit a vehicle while the engine is ing precautions are not observed: running.
Page 385: Key Ignition Park Interlock
STARTING AND OPERATING 383 WARNING! (Continued) WARNING! (Continued) • When leaving the vehicle, always remove the key • It is dangerous to move the shift lever out of PARK fob from the ignition and lock your vehicle. Never or NEUTRAL if the engine speed is higher than leave children alone in a vehicle, or with access to idle speed.
Page 386: Brake/Transmission Shift Interlock System
384 STARTING AND OPERATING Brake/Transmission Shift Interlock System The electronically-controlled transmission provides a This vehicle is equipped with a Brake Transmission Shift precise shift schedule. The transmission electronics are Interlock System (BTSI) that holds the shift lever in the self-calibrating; therefore, the first few shifts on a new PARK position unless the brakes are applied.
Page 387: Gear Ranges
STARTING AND OPERATING 385 PARK This range supplements the parking brake by locking the transmission. The engine can be started in this range. Never attempt to use PARK while the vehicle is in motion. Apply the parking brake when leaving the vehicle in this range.
Page 388 386 STARTING AND OPERATING WARNING! WARNING! (Continued) • It is dangerous to move the shift lever out of PARK • Never use the PARK position as a substitute for or NEUTRAL if the engine speed is higher than the parking brake. Always apply the parking idle speed.
Page 389 STARTING AND OPERATING 387 WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure • When leaving the vehicle, always remove the key those in or near the vehicle. As with all vehicles, fob from the ignition and lock your vehicle. Never you should never exit a vehicle while the engine is leave children alone in a vehicle, or with access to running.
Page 390 388 STARTING AND OPERATING • Look at the shift lever position display and verify that CAUTION! it indicates the PARK position. • Before moving the shift lever out of PARK, you • With brake pedal released, verify that the shift lever must turn the ignition switch from the LOCK/OFF will not move out of PARK.
Page 391 STARTING AND OPERATING 389 DRIVE WARNING! This range should be used for most city and highway driving. It provides the smoothest upshifts and down- Do not coast in NEUTRAL and never turn off the shifts, and the best fuel economy. The transmission ignition to coast down a hill.
Page 392 390 STARTING AND OPERATING Transmission Limp Home Mode 2. Shift the transmission into PARK. Transmission function is monitored electronically for 3. Turn the engine OFF. abnormal conditions. If a condition is detected that could result in transmission damage, Transmission Limp Home 4.
Page 393 STARTING AND OPERATING 391 Electronic Range Select (ERS) Operation To exit ERS mode, simply press and hold the shift lever to The Electronic Range Select (ERS) shift control allows the the right (+) until “D” is once again displayed in the shift driver to limit the highest available gear when the shift lever position indicator in the instrument cluster.
Page 394: Four-Wheel Drive Operation (Command-Trac I Or Rock-Trac )
392 STARTING AND OPERATING • 4L (Four-wheel drive low range) Overdrive Operation The automatic transmission includes an electronically controlled Overdrive (fifth gear). The transmission will automatically shift into the Overdrive gear if the follow- ing conditions are present: • the shift lever is in the DRIVE position, •...
Page 395 STARTING AND OPERATING 393 In the event that additional traction is required, the NOTE: Do not attempt to shift when only the front or transfer case 4H and 4L positions can be used to lock the rear wheels are spinning. The transfer case is not front and rear driveshafts together, forcing the front and equipped with a synchronizer, and the front and rear rear wheels to rotate at the same speed.
Page 396: Shift Positions
394 STARTING AND OPERATING 4H Position WARNING! This range locks the front and rear driveshafts together, forcing the front and rear wheels to rotate at the same You or others could be injured if you leave the speed. This range (4H) provides additional traction for vehicle unattended with the transfer case in the N loose, slippery road surfaces and should not be used on (Neutral) position without first fully engaging the...
Page 397: Shifting Procedure
STARTING AND OPERATING 395 speed. This range (4L) provides additional traction and 4H to 4L or 4L to 4H maximum pulling power for loose, slippery road surfaces With the vehicle rolling at 2 to 3 mph (3 to 5 km/h), shift only.
Page 398: Trac-Lok Rear Axle - If Equipped
396 STARTING AND OPERATING Trac-Lok is especially helpful during slippery driving WARNING! conditions. With both rear wheels on a slippery surface, a slight application of the accelerator will supply maxi- Failure to engage a position completely can cause mum traction. transfer case damage or loss of power and vehicle control.
Page 399 STARTING AND OPERATING 397 To activate the system, press the bottom of the AXLE LOCK switch once to lock the rear axle only (the “Rear Axle Lock Indicator Light” will illuminate), press the bottom of the switch again to lock the front axle (the “Front Axle Lock Indicator Light”...
Page 400: Electronic Sway Bar Disconnect - If Equipped
398 STARTING AND OPERATING ELECTRONIC SWAY BAR DISCONNECT — IF EQUIPPED Your vehicle may be equipped with an electronic discon- necting stabilizer/sway bar. This system allows greater front suspension travel in off-road situations. This system is controlled by the SWAY BAR switch located on the instrument panel (to the left of the steering column).
Page 401 STARTING AND OPERATING 399 when activation conditions are not met. The stabilizer/ To disconnect the stabilizer/sway bar, shift to either 4H sway bar should remain in on-road mode during normal or 4L and press the SWAY BAR switch to obtain the driving conditions.
Page 402: On-Road Driving Tips
400 STARTING AND OPERATING An advantage of the higher ground clearance is a better WARNING! view of the road, allowing you to anticipate problems. They are not designed for cornering at the same speeds as If the stabilizer/sway bar will not return to on-road conventional two-wheel drive vehicles any more than mode, vehicle stability is greatly reduced.
Page 403: The Basics Of Off-Road Driving
STARTING AND OPERATING 401 2. Remove one bolt from the underside of the vehicle. 3. Remove the side step assembly. The Basics Of Off-Road Driving You will encounter many types of terrain driving off- road. You should be familiar with the terrain and area before proceeding.
Page 404: When To Use 4L (Low) Range
402 STARTING AND OPERATING your vehicle’s steering, handling and traction. Control- WARNING! ling your vehicle is one of the keys to successful off-road driving, so always keep a firm grip on the steering wheel Always wear your seat belt and firmly tie down and maintain a good driving posture.
Page 405: Simultaneous Brake And Throttle Operation
STARTING AND OPERATING 403 the transfer case into 4L (Low) if necessary. Do not shift to CAUTION! a lower gear than necessary to maintain headway. Over- revving the engine can spin the wheels and traction will Do not use 4L (Low) range when operating the be lost.
Page 406: Crossing Obstacles (Rocks And Other High Points)
404 STARTING AND OPERATING position to maintain your momentum. If you start to slow tire pressure will drastically improve your traction and to a stop, try turning your steering wheel no more than a handling while driving on the soft sand, but you must 1/4 turn quickly back and forth for additional traction.
Page 407 STARTING AND OPERATING 405 to safely recover the vehicle if something goes wrong. stand a safe distance in front of you where they can see Keeping a firm grip on the steering wheel, bring the the obstacle, watch your tires and undercarriage, and vehicle to a complete stop and then inch the vehicle guide you through.
Page 408 406 STARTING AND OPERATING Crossing A Ravine, Gully, Ditch, Washout Or Rut Crossing Logs When crossing a ravine, gully, ditch, washout or a large To cross a log, approach it at a slight angle (approxi- rut, the angled approach is the key to maintaining your mately 10 to 15 degrees).
Page 409: Hill Climbing
STARTING AND OPERATING 407 and place a few rocks under the tires so the weight is off Before Climbing A Steep Hill of the high point when you let the vehicle down. You can As you approach a hill, consider its grade or steepness. also try rocking the vehicle or winching the vehicle off Determine if it is too steep.
Page 410 408 STARTING AND OPERATING slightly to bring all four tires back on the ground. As you Driving Downhill approach the crest of the hill, ease off the throttle and Before driving down a steep hill, you need to determine slowly proceed over the top. If the wheels start to slip as if it is too steep for a safe descent.
Page 411: Driving Through Water
STARTING AND OPERATING 409 Driving Across An Incline engine braking to control the descent and apply your If at all possible, avoid driving across an incline. If it is brakes, if necessary, but do not allow the tires to lock. necessary, know your vehicle’s abilities.
Page 412 410 STARTING AND OPERATING designated and approved. You should tread lightly and CAUTION! avoid damage to the environment. You should know • Water ingestion into the axles, transmission, trans- your vehicle’s abilities and be able to recover it if something goes wrong. You should never stop or shut a fer case, engine or vehicle interior can occur if you vehicle off when crossing deep water unless you ingested drive too fast or through too deep of water.
Page 413 STARTING AND OPERATING 411 muddy waters; check for hidden obstacles. Make sure CAUTION! you will not be intruding on any wildlife, and you can recover the vehicle if necessary. The key to a safe crossing Muddy waters can reduce the cooling system effec- is the water depth, current and bottom conditions.
Page 414: After Driving Off-Road
412 STARTING AND OPERATING the slowest current can push the heaviest vehicle down- always a good idea to check for damage. That way you stream and out of control if the water is deep enough to can get any problems taken care of right away and have push on the large surface area of the vehicle’s body.
Page 415: Power Steering
STARTING AND OPERATING 413 • After extended operation in mud, sand, water, or POWER STEERING similar dirty conditions, have the radiator, fan, brake The standard power steering system will give you good rotors, wheels, brake linings, and axle yokes inspected vehicle response and increased ease of maneuverability and cleaned as soon as possible.
Page 416: Power Steering Fluid Check
414 STARTING AND OPERATING system. This noise should be considered normal, and it checked if a leak is suspected, abnormal noises are does not in any way damage the steering system. apparent, and/or the system is not functioning as antici- pated.
Page 417: Parking Brake
STARTING AND OPERATING 415 If necessary, add fluid to restore to the proper indicated level. With a clean cloth, wipe any spilled fluid from all surfaces. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Your Vehicle” for further information. PARKING BRAKE Before leaving the vehicle, make sure that the parking brake is fully applied.
Page 418 416 STARTING AND OPERATING NOTE: WARNING! • When the parking brake is applied and the automatic • Never use the PARK position on an automatic transmission is placed in gear, the “Brake Warning Light” will flash. If vehicle speed is detected, a chime transmission as a substitute for the parking brake.
Page 419: Anti-Lock Brake System
STARTING AND OPERATING 417 WARNING! (Continued) CAUTION! • Do not leave the key in or near the vehicle. A child If the “Brake Warning Light” remains on with the could operate power windows, other controls, or parking brake released, a brake system malfunction move the vehicle.
Page 420 418 STARTING AND OPERATING WARNING! WARNING! • Pumping of the Anti-Lock Brakes will diminish Significant over or under-inflation of tires, or mixing sizes of tires or wheels on the vehicle can lead to loss their effectiveness and may lead to a collision. of braking effectiveness.
Page 421: Electronic Brake Control System
STARTING AND OPERATING 419 ELECTRONIC BRAKE CONTROL SYSTEM WARNING! (Continued) Your vehicle is equipped with an advanced electronic • The capabilities of an ABS-equipped vehicle must brake control system that includes Anti-Lock Brake Sys- never be exploited in a reckless or dangerous tem (ABS), Traction Control System (TCS), Brake Assist manner which could jeopardize the user’s safety System (BAS), Hill Start Assist (HSA), Electronic Roll...
Page 422: Traction Control System (Tcs)
420 STARTING AND OPERATING controls the wheel spin across a driven axle. If one wheel WARNING! on a driven axle is spinning faster than the other, the system will apply the brake of the spinning wheel. This The Anti-Lock Brake System (ABS) cannot prevent will allow more engine torque to be applied to the wheel the natural laws of physics from acting on the ve- that is not spinning.
Page 423: Hill Start Assist (Hsa)
STARTING AND OPERATING 421 reduce brake pedal pressure unless braking is no longer Hill Start Assist (HSA) desired. Once the brake pedal is released, the BAS is The HSA system is designed to assist the driver when deactivated. starting a vehicle from a stop on a hill. HSA will maintain the level of brake pressure the driver applied for a short WARNING! period of time after the driver takes their foot off of the...
Page 424 422 STARTING AND OPERATING • Gear selection matches vehicle uphill direction (i.e., WARNING! vehicle facing uphill is in forward gear; vehicle back- ing uphill is in REVERSE gear). If the clutch pedal (manual transmission only) re- mains pressed during the application of the throttle, WARNING! the HSA will disengage allowing the vehicle to roll down the incline.
Page 425 STARTING AND OPERATING 423 HSA On Automatic Transmission Vehicles Towing With HSA The system will work in REVERSE, and all forward gears HSA will provide assistance when starting on a grade on vehicles equipped with an automatic transmission. when pulling a trailer. The system will not activate if the vehicle is placed in WARNING! NEUTRAL.
Page 426 424 STARTING AND OPERATING HSA Off WARNING! (Continued) If you wish to turn off the HSA system, follow this • HSA is not a parking brake. Always apply the procedure: parking brake fully when leaving your vehicle. 1. Start with the engine off and vehicle in PARK (auto- Also, be certain to leave the transmission in PARK.
Page 427: Electronic Roll Mitigation (Erm)
STARTING AND OPERATING 425 7. If the sequence was completed properly, the “ESC Electronic Roll Mitigation (ERM) can only reduce the Activation/Malfunction Indicator Light” will blink sev- chance of wheel lift occurring during severe or evasive eral times to confirm HSA is off. driving maneuvers.
Page 428: Electronic Stability Control (Esc)
426 STARTING AND OPERATING ESC uses sensors in the vehicle to determine the vehicle WARNING! path intended by the driver and compares it to the actual Many factors, such as vehicle loading, road conditions path of the vehicle. When the actual path does not match and driving conditions, influence the chance that the intended path, ESC applies the brake of the appro- wheel lift or rollover may occur.
Page 429 STARTING AND OPERATING 427 accelerator and apply as little throttle as possible. Be sure to The ESC system has three available operating modes in adapt your speed and driving to the prevailing road con- 4H range. The system has one operating mode in 4L ditions.
Page 430 428 STARTING AND OPERATING Partial Off All other stability features of ESC function normally. This This mode is entered by momentarily pressing the ESC mode is intended to be used if the vehicle is in deep OFF switch. snow, sand, or gravel conditions and more wheel spin than ESC would normally allow is required to gain traction.
Page 431 STARTING AND OPERATING 429 returns but TCS remains off. When the vehicle speed WARNING! drops below 35 mph (56 km/h), the ESC system shuts off. The ESC is off at low vehicle speeds in 4L range so that it With the ESC switched off, the enhanced vehicle will not interfere with off-road driving, but the ESC stability offered by ESC and ERM are unavailable.
Page 432: Esc Activation/Malfunction Indicator Light And Esc Off Indicator Light
430 STARTING AND OPERATING vehicle has been driven several miles (kilometers) at WARNING! speeds greater than 30 mph (48 km/h), see your autho- rized dealer as soon as possible to have the problem With the ESC switched off, the enhanced vehicle diagnosed and corrected.
Page 433: Trailer Sway Control (Tsc)
STARTING AND OPERATING 431 • Each time the ignition is turned ON, the ESC system swaying trailer is recognized. No driver action is re- will be ON even if it was turned off previously. quired. Note that TSC cannot stop all trailers from swaying.
Page 434: Hill Descent Control (Hdc) - If Equipped
432 STARTING AND OPERATING Hill Descent Control (HDC) – If Equipped Gear Approximate HDC Set HDC is only intended for low speed off-road driving. Speed HDC maintains vehicle speed while descending hills in 1 mph (1.5 km/h) off-road driving conditions by applying the brakes when 2.5 mph (4 km/h) necessary.
Page 435: Tire Safety Information
STARTING AND OPERATING 433 Enabling HDC TIRE SAFETY INFORMATION 1. Shift the transfer case into 4WD LOW range. Refer to Tire Markings “Four-Wheel Drive Operation” in “Starting and Operat- ing” for further information. 2. Press the “Hill Descent” button. The “Hill Descent Control Indicator Light”...
Page 436 434 STARTING AND OPERATING • LT (Light Truck) - Metric tire sizing is based on U.S. NOTE: • P (Passenger) - Metric tire sizing is based on U.S. design standards. The size designation for LT-Metric design standards. P-Metric tires have the letter “P” tires is the same as for P-Metric tires except for the molded into the sidewall preceding the size designa- letters “LT”...
Page 437 STARTING AND OPERATING 435 Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger Car tire size based on U.S. design standards ..blank..= Passenger Car tire based on European design standards LT = Light Truck tire based on U.S. design standards T or S = Temporary compact spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm)
Page 438 436 STARTING AND OPERATING EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions —...
Page 439: Tire Identification Number (Tin)
STARTING AND OPERATING 437 Tire Identification Number (TIN) Look for the TIN on the outboard side of black sidewall The TIN may be found on one or both sides of the tire, tires as mounted on the vehicle. If the TIN is not found on however, the date code may only be on one side.
Page 440: Tire Terminology And Definitions
438 STARTING AND OPERATING Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after the Cold Tire Inflation Pressure vehicle has not been driven for at least 3 hours, or driven less than 1 mile (1.6 km) after sitting for a three hour period.
Page 441: Tire Loading And Tire Pressure
STARTING AND OPERATING 439 Tire Loading And Tire Pressure Tire Placard Location Tire Placard Location (Four-Door Models) Tire Placard Location (Two-Door Models)
Page 442 440 STARTING AND OPERATING Tire And Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry 3) tire size designed for your vehicle 4) cold tire inflation pressures for the front, rear, and spare tires.
Page 443 STARTING AND OPERATING 441 NOTE: Under a maximum loaded vehicle condition, Steps For Determining Correct Load Limit gross axle weight ratings (GAWRs) for the front and rear 1. Locate the statement “The combined weight of occu- axles must not be exceeded. For further information on pants and cargo should never exceed XXX kg or XXX lbs”...
Page 444 442 STARTING AND OPERATING 4. The resulting figure equals the available amount of 6. If your vehicle will be towing a trailer, load from your cargo and luggage load capacity. For example, if “XXX” trailer will be transferred to your vehicle. Consult this amount equals 1,400 lbs (635 kg) and there will be five manual to determine how this reduces the available 150 lb (68 kg) passengers in your vehicle, the amount of...
Page 445 STARTING AND OPERATING 443...
Page 446: Tires - General Information
444 STARTING AND OPERATING Safety WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and • Under-inflation increases tire flexing and can re- increase your stopping distance. Use tires of the sult in over-heating and tire failure. recommended load capacity for your vehicle.
Page 447: Tire Inflation Pressures
STARTING AND OPERATING 445 Economy CAUTION! Improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal After inspecting or adjusting the tire pressure, al- wear patterns will reduce tread life resulting in a need for ways reinstall the valve stem cap.
Page 448: Tire Pressures For High-Speed Operation
446 STARTING AND OPERATING Tire pressures change by approximately 1 psi (7 kPa) per Tire Pressures For High-Speed Operation 12° F (7° C) of air temperature change. Keep this in mind The manufacturer advocates driving at safe speeds when checking tire pressure inside a garage, especially in within posted speed limits.
Page 449: Radial-Ply Tires
STARTING AND OPERATING 447 Radial-Ply Tires vehicle. If your vehicle has this option refer to an authorized tire dealer for the recommended tire rotation WARNING! pattern. If your vehicle is not equipped with an original equip- Combining radial ply tires with other types of tires ment tire and wheel as a spare, a non-matching tempo- on your vehicle will cause your vehicle to handle rary emergency use spare may be equipped with your...
Page 450: Compact Spare Tire - If Equipped
448 STARTING AND OPERATING Compact Spare Tire – If Equipped WARNING! The compact spare is for temporary emergency use only. You can identify if your vehicle is equipped with a Compact spares are for temporary emergency use compact spare by looking at the spare tire description on only.
Page 451: Limited-Use Spare - If Equipped
STARTING AND OPERATING 449 your original equipment tire, replace (or repair) the WARNING! original equipment tire and reinstall on the vehicle at the first opportunity. Limited-use spares are for emergency use only. In- stallation of this limited-use spare tire affects vehicle Limited-Use Spare –...
Page 452: Tread Wear Indicators
450 STARTING AND OPERATING WARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure some- one. Do not spin your vehicle’s wheels faster than 30 mph (48 km/h) when you are stuck, and do not let anyone near a spinning wheel no matter what the speed.
Page 453: Life Of Tire
STARTING AND OPERATING 451 Life Of Tire Replacement Tires The service life of a tire is dependent upon varying The tires on your new vehicle provide a balance of many factors including but not limited to: characteristics. They should be inspected regularly for wear and correct cold tire inflation pressure.
Page 454 452 STARTING AND OPERATING It is recommended to replace the two front tires or two WARNING! rear tires as a pair. Replacing just one tire can seriously • Do not use a tire, wheel size or rating other than affect your vehicle’s handling. If you ever replace a wheel, make sure that the wheel’s specifications match that specified for your vehicle.
Page 455: Tire Chains
STARTING AND OPERATING 453 • Use SAE class “S” tire chains or traction devices only. WARNING! (Continued) • Failure to equip your vehicle with tires having CAUTION! adequate speed capability can result in sudden tire To avoid damage to your vehicle or tires, observe the failure and loss of vehicle control.
Page 456: Tire Rotation Recommendations
454 STARTING AND OPERATING Always use the lower suggested operating speed if both CAUTION! (Continued) the chain manufacturer and vehicle manufacturer sug- • Drive cautiously and avoid severe turns and large gest a maximum speed. This notice applies to all chain bumps, especially with a loaded vehicle.
Page 457: Tire Pressure Monitor System (Tpms)
STARTING AND OPERATING 455 Refer to the “Maintenance Schedule” for the proper TIRE PRESSURE MONITOR SYSTEM (TPMS) maintenance intervals. More frequent rotation is permis- The Tire Pressure Monitoring System (TPMS) will warn sible if desired. The reasons for any rapid or unusual wear the driver of a low tire pressure based on the vehicle should be corrected prior to rotation being performed.
Page 458 456 STARTING AND OPERATING The TPMS will warn the driver of a low tire pressure if For example, your vehicle may have a recommended the tire pressure falls below the low pressure warning cold (parked for more than three hours) air pressure of threshold for any reason, including low temperature 35 psi (241 kPa).
Page 459 STARTING AND OPERATING 457 NOTE: CAUTION! • The TPMS is not intended to replace normal tire care • The TPMS has been optimized for the original and maintenance, nor to provide warning of a tire failure or condition. equipment tires and wheels. The TPMS pressures have been established for the tire size equipped •...
Page 460: Base System
458 STARTING AND OPERATING • Seasonal temperature changes will affect tire pressure, • Tire Pressure Monitoring Telltale Light and the TPMS will monitor the actual tire pressure in A tire pressure monitoring sensor is located in the spare the tire. wheel if the vehicle is equipped with a matching full size Base System spare wheel and tire assembly.
Page 461 STARTING AND OPERATING 459 extinguish once the updated tire pressures have been 4. Using tire chains on the vehicle. received. The vehicle may need to be driven for up to 5. Using wheels/tires not equipped with TPM sensors. 20 minutes above 15 mph (24 km/h) to receive this information.
Page 462: General Information
460 STARTING AND OPERATING The TPMS will not be able to monitor the tire pressure. driven for up to 20 minutes above 15 mph (24 km/h) If you install the spare tire in place of a road tire that in order for the TPMS to receive this information. has a pressure below the low-pressure warning limit, General Information upon the next ignition key cycle, a chime will sound...
Page 463: Fuel Requirements
STARTING AND OPERATING 461 FUEL REQUIREMENTS Over 40 auto manufacturer’s worldwide have issued and All engines are designed to meet all emis- endorsed consistent gasoline specifications (the World- sions regulations and provide excellent wide Fuel Charter, WWFC) to define fuel properties fuel economy and performance when us- necessary to deliver enhanced emissions, performance, ing high quality unleaded “regular”...
Page 464: Gasoline/Oxygenate Blends
462 STARTING AND OPERATING Gasoline/Oxygenate Blends E-85 Usage In Non-Flex Fuel Vehicles Some fuel suppliers blend unleaded gasoline with oxy- Non-FFV vehicles are compatible with gasoline contain- genates such as Ethanol. Fuels blended with oxygenates ing 10% ethanol (E10). Gasoline with higher ethanol may be used in your vehicle.
Page 465: Mmt In Gasoline
STARTING AND OPERATING 463 • disconnect and reconnect the battery to reset the It is even more important to look for gasoline without engine controller memory MMT in Canada, because MMT can be used at levels higher than those allowed in the United States. More extensive repairs will be required for prolonged exposure to E-85 fuel.
Page 466: Fuel System Cautions
464 STARTING AND OPERATING Fuel System Cautions CAUTION! (Continued) • The use of fuel additives which are now being CAUTION! sold as octane enhancers is not recommended. Follow these guidelines to maintain your vehicle’s Most of these products contain high concentra- performance: tions of methanol.
Page 467: Carbon Monoxide Warnings
STARTING AND OPERATING 465 Carbon Monoxide Warnings WARNING! (Continued) • Guard against carbon monoxide with proper WARNING! maintenance. Have the exhaust system inspected Carbon monoxide (CO) in exhaust gases is deadly. every time the vehicle is raised. Have any abnor- Follow the precautions below to prevent carbon mal conditions repaired promptly.
Page 468: Adding Fuel
466 STARTING AND OPERATING ADDING FUEL CAUTION! Fuel Filler Cap (Gas Cap) • Damage to the fuel system or emission control The gas cap is located on the driver’s side of the vehicle. system could result from using an improper fuel If the gas cap is lost or damaged, be sure the replacement cap (gas cap).
Page 469: Loose Fuel Filler Cap Message
STARTING AND OPERATING 467 • If the gas cap is not tightened properly, the MIL will WARNING! come on. Be sure the gas cap is tightened every time • Never have any smoking materials lit in or near the vehicle is refueled. the vehicle when the gas cap is removed or the Loose Fuel Filler Cap Message tank is being filled.
Page 470: Vehicle Loading
468 STARTING AND OPERATING VEHICLE LOADING tongue weight, and cargo. The label also specifies maxi- mum capacities of front and rear axle systems (GAWR). Certification Label Total load must be limited, so GVWR, and front and rear As required by National Highway Traffic Safety Admin- GAWR are not exceeded.
Page 471 STARTING AND OPERATING 469 components, sometimes specified by purchasers for in- loaded into the vehicle. The front and rear curb weight creased durability, does not necessarily increase the ve- values are determined by weighing your vehicle on a hicle’s GVWR. commercial scale before any occupants or cargo are added.
Page 472: Trailer Towing
470 STARTING AND OPERATING heavier items down low and be sure that the weight is with your vehicle. Before towing a trailer, carefully distributed equally. Stow all loose items securely before review this information to tow your load as efficiently driving.
Page 473 STARTING AND OPERATING 471 Gross Trailer Weight (GTW) rear GAWR. Refer to “Vehicle Loading/Vehicle Certifica- The GTW is the weight of the trailer plus the weight of all tion Label” in “Starting and Operating” for further cargo, consumables and equipment (permanent or tem- information.
Page 474 472 STARTING AND OPERATING Trailer Sway Control – If Equipped provides for a more level ride, offering more consistent The trailer sway control is a telescoping link that can be steering and brake control thereby enhancing towing installed between the hitch receiver and the trailer safety.
Page 475: Trailer Hitch Classification
STARTING AND OPERATING 473 Trailer Hitch Classification Definitions WARNING! (Continued) Class Max. Trailer Hitch Industry • Weight-Distributing Hitch Systems may not be Standards compatible with Surge Brake Couplers. Consult Class I - Light Duty 2,000 lbs (907 kg) with your hitch and trailer manufacturer or a Class II - Medium 3,500 lbs (1 587 kg) reputable Recreational Vehicle dealer for addi-...
Page 476: Trailer Towing Weights (Maximum Trailer Weight Ratings)
474 STARTING AND OPERATING Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/ Axle Model GCWR (Gross Frontal Area Max. GTW Max. Trailer Transmission Combined Wt. (Gross Trailer Tongue Wt.
Page 477 STARTING AND OPERATING 475 Engine/ Axle Model GCWR (Gross Frontal Area Max. GTW Max. Trailer Transmission Combined Wt. (Gross Trailer Tongue Wt. Rating) Wt.) (See Note) 3.6L/ 3.73 Two–Door 6,454 lbs 25 sq ft 2,000 lbs 200 lbs Automatic Sahara Model (2 927 kg) (2.32 sq m) (907 kg)
Page 478 476 STARTING AND OPERATING Engine/ Axle Model GCWR (Gross Frontal Area Max. GTW Max. Trailer Transmission Combined Wt. (Gross Trailer Tongue Wt. Rating) Wt.) (See Note) 3.6L/Manual 3.21 Four–Door 5,782 lbs 32 sq ft 1,000 lbs 100 lbs Sahara Model (2 623 kg) (2.97 sq m) (453 kg)
Page 479 STARTING AND OPERATING 477 Engine/ Axle Model GCWR (Gross Frontal Area Max. GTW Max. Trailer Transmission Combined Wt. (Gross Trailer Tongue Wt. Rating) Wt.) (See Note) 3.6L/Manual 4.10 Four–Door 8,406 lbs 32 sq ft 3,500 lbs 350 lbs Rubicon Model (3 813 kg) (2.97 sq m) (1 587 kg)
Page 480: Trailer And Tongue Weight
478 STARTING AND OPERATING Trailer And Tongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer. This places 10% to 15% of the Gross Trailer Weight (GTW) on the tow hitch of your vehicle.
Page 481: Towing Requirements
STARTING AND OPERATING 479 NOTE: Remember that everything put into or on the CAUTION! trailer adds to the load on your vehicle. Also, additional • Do not tow a trailer at all during the first 500 miles factory-installed options, or authorized dealer-installed options, must be considered as part of the total load on (805 km) the new vehicle is driven.
Page 482 480 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Make certain that the load is secured in the trailer • Vehicles with trailers should not be parked on a and will not shift during travel. When trailering grade. When parking, apply the parking brake on cargo that is not fully secured, dynamic load shifts the tow vehicle.
Page 483 STARTING AND OPERATING 481 − When replacing tires, refer to “Tires – General Infor- WARNING! (Continued) mation” in “Starting and Operating” for information 4. Tongue weight rating for the trailer hitch utilized on replacement tires and for proper tire replacement (This requirement may limit the ability to always procedures.
Page 484 482 STARTING AND OPERATING − Trailer brakes are recommended for trailers over WARNING! (Continued) 1,000 lbs (454 kg) and required for trailers in excess of • Towing any trailer will increase your stopping 2,000 lbs (907 kg). distance. When towing, you should allow for ad- ditional space between your vehicle and the ve- CAUTION! hicle in front of you.
Page 485: Towing Tips
STARTING AND OPERATING 483 The electrical connections are all complete to the vehicle Towing Tips but you must mate the harness to a trailer connector. Before setting out on a trip, practice turning, stopping Refer to the following illustration. and backing the trailer in an area away from heavy traffic.
Page 486: Starting And Operating
484 STARTING AND OPERATING The automatic transmission fluid and filter should be Cooling System changed if you REGULARLY tow a trailer for more than To reduce potential for engine and transmission over- 45 minutes of continuous operation. Refer to “Mainte- heating, take the following actions: nance Schedule”...
Page 487: Recreational Towing (Behind Motorhome, Etc.)
STARTING AND OPERATING 485 RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle Towing Condition Wheels OFF the Four-Wheel Drive Models Ground See Instructions • Automatic transmission in PARK Flat Tow NONE • Manual transmission in gear (NOT in NEUTRAL (N) •...
Page 488: Recreational Towing - Four-Wheel Drive Models
486 STARTING AND OPERATING Recreational Towing – Four-Wheel Drive Models CAUTION! (Continued) NOTE: The transfer case must be shifted into NEU- • Manual transmissions must be placed in gear (not TRAL (N), automatic transmission must be shifted into in Neutral) for recreational towing. PARK, and manual transmission must be placed in gear •...
Page 489 STARTING AND OPERATING 487 Shifting Into NEUTRAL (N) CAUTION! Use the following procedure to prepare your vehicle for recreational towing. It is necessary to follow these steps to be certain that the transfer case is fully in NEUTRAL (N) before WARNING! recreational towing to prevent damage to internal parts.
Page 490 488 STARTING AND OPERATING 8. Release the brake pedal (and clutch pedal on manual 13. Attach the vehicle to the tow vehicle using a suitable transmissions) for five seconds and ensure that there is tow bar. no vehicle movement. 14. Release the parking brake. 9.
Page 491 STARTING AND OPERATING 489 6. Press and hold the brake pedal. 11. Disconnect vehicle from the tow vehicle. 7. Shift the transmission into NEUTRAL. 12. Start the engine. 8. Shift the transfer case lever to the desired position. 13. Press and hold the brake pedal. NOTE: When shifting out of transfer case NEUTRAL 14.
Page 493: What To Do In Emergencies
WHAT TO DO IN EMERGENCIES CONTENTS Hazard Warning Flashers ....492 Jump-Starting Procedures ....500 If Your Engine Overheats .
Page 494: Hazard Warning Flashers
492 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the instrument panel below the climate controls. potential for overheating by taking the appropriate ac- tion.
Page 495: Jacking And Tire Changing
WHAT TO DO IN EMERGENCIES 493 NOTE: There are steps that you can take to slow down WARNING! an impending overheat condition: You or others can be badly burned by hot engine • If your air conditioner (A/C) is on, turn it off. The A/C coolant (antifreeze) or steam from your radiator.
Page 496: Jack Location
494 WHAT TO DO IN EMERGENCIES WARNING! (Continued) • Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never put any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift.
Page 497: Preparations For Jacking
WHAT TO DO IN EMERGENCIES 495 NOTE: If you have added aftermarket accessories to the 4. Shift the automatic transmission into PARK, or a spare tire mounted carrier, it cannot exceed a gross manual transmission into REVERSE. weight of 50 lbs (23 kg) including the weight of the spare 5.
Page 498: Jacking Instructions
496 WHAT TO DO IN EMERGENCIES Jacking Instructions WARNING! (Continued) • Do not let anyone sit in the vehicle when it is on a WARNING! jack. Carefully follow these tire changing warnings to • Do not get under the vehicle when it is on a jack. help prevent personal injury or damage to your •...
Page 499 WHAT TO DO IN EMERGENCIES 497 CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle. 1. Remove the spare tire, jack and tools from the stored location.
Page 500 498 WHAT TO DO IN EMERGENCIES WARNING! Raising the vehicle higher than necessary can make the vehicle less stable and cause a collision. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 6.
Page 501: Road Tire Installation
WHAT TO DO IN EMERGENCIES 499 8. Lower the vehicle by turning the jack screw to the left, WARNING! and remove the jack. A loose tire or jack, thrown forward in a collision or 9. Finish tightening the lug nuts. Push down on the hard stop, could endanger the occupants of the ve- wrench while tightening for increased leverage.
Page 502: Jump-Starting Procedures
500 WHAT TO DO IN EMERGENCIES 3. Lower the vehicle to the ground by turning the jack NOTE: When using a portable battery booster pack handle counterclockwise. follow the manufacturer’s operating instructions and precautions. 4. Finish tightening the lug nuts. Push down on the wrench while at the end of the handle for increased CAUTION! leverage.
Page 503: Preparations For Jump-Start
WHAT TO DO IN EMERGENCIES 501 Preparations For Jump-Start WARNING! The battery in your vehicle is located in the right rear of • Take care to avoid the radiator cooling fan when- the engine compartment, behind the Power Distribution Center. ever the hood is raised.
Page 504: Jump-Starting Procedure
502 WHAT TO DO IN EMERGENCIES 3. If using another vehicle to jump-start the battery, park CAUTION! the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF. Failure to follow these procedures could result in damage to the charging system of the booster vehicle WARNING! or the discharged vehicle.
Page 505 WHAT TO DO IN EMERGENCIES 503 8. Disconnect the opposite end of the positive (+) jumper WARNING! cable from the positive (+) post of the booster battery. Do not connect the cable to the negative post (-) of the 9. Disconnect the positive (+) end of the jumper cable discharged battery.
Page 506: Freeing A Stuck Vehicle
504 WHAT TO DO IN EMERGENCIES FREEING A STUCK VEHICLE NOTE: If your vehicle is equipped with Traction Con- If your vehicle becomes stuck in mud, sand or snow, it trol or Electronic Stability Control (ESC), turn the system can often be moved by a rocking motion. Turn your OFF before attempting to “rock”...
Page 507: Emergency Tow Hooks - If Equipped
WHAT TO DO IN EMERGENCIES 505 WARNING! WARNING! • Chains are not recommended for freeing a stuck Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause damage, or vehicle. Chains may break, causing serious injury even failure, of the axle and tires.
Page 508: Shift Lever Override
506 WHAT TO DO IN EMERGENCIES SHIFT LEVER OVERRIDE If a malfunction occurs and the shift lever cannot be moved out of the PARK position, you can use the following procedure to temporarily move the shift lever: 1. Firmly apply the parking brake. 2.
Page 509: Towing A Disabled Vehicle
WHAT TO DO IN EMERGENCIES 507 TOWING A DISABLED VEHICLE may also be towed as described under “Recreational This section describes procedures for towing a disabled Towing” in the “Starting And Operating” section. vehicle using a commercial wrecker service. If the trans- mission and drivetrain are operable, disabled vehicles Towing Condition Wheels OFF the...
Page 510: Towing Without The Ignition Key Fob
508 WHAT TO DO IN EMERGENCIES If you must use the accessories (wipers, defrosters, etc.) CAUTION! (Continued) while being towed, the ignition must be in the ON/RUN • If the vehicle being towed requires steering. the position, not the ACC position. ignition switch must be in the ON/RUN or ACC If the vehicle’s battery is discharged, refer to “Shift Lever position, not the LOCK/OFF position.
Page 511: Four-Wheel Drive Models
WHAT TO DO IN EMERGENCIES 509 Four–Wheel Drive Models CAUTION! The manufacturer recommends towing with all wheels • Front or rear wheel lifts should not be used. OFF the ground. Acceptable methods are to tow the vehicle on a flatbed or with one end of the vehicle raised Internal damage to the transmission or transfer and the opposite end on a towing dolly.
Page 513: Maintaining Your Vehicle
MAINTAINING YOUR VEHICLE CONTENTS Engine Compartment — 3.6L ... . . 513 Engine Oil Filter ..... 520 Onboard Diagnostic System —...
Page 514 512 MAINTAINING YOUR VEHICLE Brake System ..... . . 533 Bulb Replacement ..... 555 Automatic Transmission –...
Page 515: Engine Compartment - 3.6L
MAINTAINING YOUR VEHICLE 513 ENGINE COMPARTMENT — 3.6L 1 — Integrated Power Module (Fuses) 6 — Washer Fluid Reservoir 2 — Battery 7 — Engine Coolant Reservoir 3 — Engine Oil Dipstick 8 — Air Cleaner Filter 4 — Engine Oil Fill 9 —...
Page 516: Onboard Diagnostic System - Obd Ii
514 MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated onboard • Prolonged driving with the MIL on could cause diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic further damage to the emission control system.
Page 517: Emissions Inspection And Maintenance Programs
MAINTAINING YOUR VEHICLE 515 the message will appear the next time the vehicle is Normally, the OBD II system will be ready. The OBD II started. This might indicate a damaged cap. If the prob- system may not be ready if your vehicle was recently lem is detected twice in a row, the system will turn on the serviced, recently had a dead battery or a battery replace- MIL.
Page 518: Replacement Parts
516 MAINTAINING YOUR VEHICLE 4. Approximately 15 seconds later, one of two things will system to update. A recheck with the above test routine happen: may then indicate that the system is now ready. a. The MIL will flash for about 10 seconds and then Regardless of whether your vehicle’s OBD II system is return to being fully illuminated until you turn OFF ready or not, if the MIL is illuminated during normal...
Page 519: Dealer Service
MAINTAINING YOUR VEHICLE 517 DEALER SERVICE MAINTENANCE PROCEDURES Your authorized dealer has the qualified service person- The pages that follow contain the required maintenance nel, special tools, and equipment to perform all service services determined by the engineers who designed your operations in an expert manner.
Page 520: Engine Oil
518 MAINTAINING YOUR VEHICLE Checking the oil while the vehicle is on level ground will CAUTION! (Continued) improve the accuracy of the oil level readings. Always • Your vehicle has been built with improved fluids maintain the oil level within the SAFE zone on the that protect the performance and durability of dipstick.
Page 521 MAINTAINING YOUR VEHICLE 519 Engine Oil Selection CAUTION! For best performance and maximum protection for all engines under all types of operating conditions, the Do not use chemical flushes in your engine oil as the manufacturer recommends engine oils that are API Cer- chemicals can damage your engine.
Page 522: Engine Oil Filter
520 MAINTAINING YOUR VEHICLE Synthetic Engine Oils Engine Oil Filter Synthetic engine oils can be used if the recommended oil The engine oil filter should be replaced with a new filter quality requirements are met, and the recommended at every engine oil change. maintenance intervals for oil and filter changes are Engine Oil Filter Selection followed.
Page 523: Maintenance-Free Battery
MAINTAINING YOUR VEHICLE 521 WARNING! WARNING! • Battery fluid is a corrosive acid solution and can The air cleaner can provide protection in the case of engine backfire. Do not remove the air cleaner unless burn or even blind you. Do not allow battery fluid it is necessary for repair or maintenance.
Page 524: Air Conditioner Maintenance
522 MAINTAINING YOUR VEHICLE Air Conditioner Maintenance CAUTION! For best possible performance, your air conditioner • It is essential when replacing the cables on the should be checked and serviced by an authorized dealer at the start of each warm season. This service should battery that the positive cable is attached to the include cleaning of the condenser fins and a performance positive post and the negative cable is attached to...
Page 525: Body Lubrication
MAINTAINING YOUR VEHICLE 523 Refrigerant Recovery And Recycling WARNING! R-134a Air Conditioning Refrigerant is a hydrofluoro- • Use only refrigerants and compressor lubricants carbon (HFC) that is endorsed by the Environmental Protection Agency (EPA) and is an ozone-saving product. approved by the manufacturer for your air condi- However, the manufacturer recommends that air condi- tioning system.
Page 526: Windshield Wiper Blades
524 MAINTAINING YOUR VEHICLE hood latching components to ensure proper function. remove frost or ice from the windshield. Keep the blade When performing other underhood services, the hood rubber out of contact with petroleum products such as latch, release mechanism and safety catch should be engine oil, gasoline, etc.
Page 527: Exhaust System
MAINTAINING YOUR VEHICLE 525 some washer fluid and apply it to a cloth or towel and Exhaust System wipe clean the wiper blades; this will help blade perfor- The best protection against carbon monoxide entry into mance. the vehicle body is a properly maintained engine exhaust system.
Page 528 526 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Exhaust gases can injure or kill. They contain • The catalytic converter requires the use of un- carbon monoxide (CO), which is colorless and leaded fuel only. Leaded gasoline will destroy the odorless. Breathing it can make you unconscious effectiveness of the catalyst as an emissions con- and can eventually poison you.
Page 529 MAINTAINING YOUR VEHICLE 527 Under normal operating conditions, the catalytic con- To minimize the possibility of catalytic converter dam- verter will not require maintenance. However, it is im- age: portant to keep the engine properly tuned to assure • Do not shut off the engine or interrupt the ignition, proper catalyst operation and prevent possible catalyst when the transmission is in gear and the vehicle is in damage.
Page 530: Cooling System
528 MAINTAINING YOUR VEHICLE Cooling System equipped) or radiator for any accumulation of bugs, leaves, etc. If dirty, clean by gently spraying water from a WARNING! garden hose vertically down the face of the A/C con- denser (if equipped) or the back of the radiator core. You or others can be badly burned by hot engine Check the engine cooling system hoses for brittle rubber, coolant (antifreeze) or steam from your radiator.
Page 531 MAINTAINING YOUR VEHICLE 529 Cooling System – Drain, Flush, And Refill CAUTION! If the engine coolant (antifreeze) is dirty and contains a • Mixing of engine coolant (antifreeze) other than considerable amount of sediment, clean and flush with reliable cooling system cleaner. Follow with a thorough the specified HOAT engine coolant (antifreeze) rinsing to remove all deposits and chemicals.
Page 532 530 MAINTAINING YOUR VEHICLE Please review these recommendations for using Hybrid CAUTION! (Continued) Organic Additive Technology (HOAT) engine coolant • This vehicle has not been designed for use with (antifreeze). When adding engine coolant (antifreeze): Propylene Glycol based engine coolant (anti- •...
Page 533 MAINTAINING YOUR VEHICLE 531 Please note that it is the owner’s responsibility to main- WARNING! tain the proper level of protection against freezing ac- cording to the temperatures occurring in the area where The warning words DO NOT OPEN HOT on the the vehicle is operated.
Page 534 532 MAINTAINING YOUR VEHICLE to remain in puddles on the ground. If ingested by a child When additional engine coolant (antifreeze) is needed to or pet, seek emergency assistance immediately. Clean up maintain the proper level, it should be added to the any ground spills immediately.
Page 535: Brake System
MAINTAINING YOUR VEHICLE 533 • Do not change the thermostat for Summer or Winter engine coolant (antifreeze) needs to be added, the contents of the coolant recovery bottle must also be operation. If replacement is ever necessary, install protected against freezing. ONLY the correct type thermostat.
Page 536 534 MAINTAINING YOUR VEHICLE Power Disc Brakes WARNING! Disc brakes do not require adjustment; however, several • Use only manufacturer’s recommended brake hard stops during the break-in period are recommended to seat the linings and wear off any foreign material. fluid.
Page 537: Automatic Transmission - If Equipped
MAINTAINING YOUR VEHICLE 535 WARNING! (Continued) WARNING! (Continued) • To avoid contamination from foreign matter or • Do not allow petroleum based fluid to contami- moisture, use only new brake fluid or fluid that nate the brake fluid. Brake seal components could has been in a tightly closed container.
Page 538 536 MAINTAINING YOUR VEHICLE CAUTION! CAUTION! Using a transmission fluid other than the manufac- Do not use chemical flushes in your transmission as turer’s recommended fluid may cause deterioration the chemicals can damage your transmission compo- in transmission shift quality and/or torque converter nents.
Page 539 MAINTAINING YOUR VEHICLE 537 3. Fully apply the parking brake. the fluid at approximately 80° F (27° C). If the fluid level is correctly established at 80° F (27° C), it should be 4. Place the shift lever momentarily into each gear posi- between the HOT (upper) reference holes when the tion ending with the shift lever in PARK.
Page 540: Hydraulic Clutch Fluid - Manual Transmission
538 MAINTAINING YOUR VEHICLE normal for the dipstick cap to spring back slightly from Fluid Level Check its fully seated position, as long as its seal remains Check the fluid level by removing the fill plug. The fluid engaged in the dipstick tube. level should be between the bottom of the fill hole and a point not more than 3/16 in (4.76 mm) below the bottom Hydraulic Clutch Fluid –...
Page 541: Transfer Case
MAINTAINING YOUR VEHICLE 539 Transfer Case Drain First remove the fill plug (B), then the drain plug (C). The Fluid Level Check recommended tightening torque for the drain and fill The fluid level should be to the bottom edge of the fill plugs is 15 to 25 ft lbs (20 to 34 N·m).
Page 542: Appearance Care And Protection From Corrosion
540 MAINTAINING YOUR VEHICLE fluid level. Refer to “Fluids, Lubricants, and Genuine trees and road surfaces during other seasons, are highly Parts” in “Maintaining Your Vehicle” for further informa- corrosive to the metal in your vehicle. Outside parking, tion. which exposes your vehicle to airborne contaminants, road surfaces on which the vehicle is operated, extreme Fluid Level Check hot or cold weather and other extreme conditions will...
Page 543 MAINTAINING YOUR VEHICLE 541 • Insects, tree sap and tar. • Use a high quality cleaner wax, such as MOPAR Cleaner Wax or equivalent to remove road film, stains, • Salt in the air near sea-coast localities. and to protect your paint finish. Take care never to •...
Page 544 542 MAINTAINING YOUR VEHICLE • If you carry special cargo such as chemicals, fertilizers, Special Care de-icer salt, etc., assure that such materials are well • If you drive on salted or dusty roads or if you drive packaged and sealed. near the ocean, hose off the undercarriage at least once •...
Page 545 MAINTAINING YOUR VEHICLE 543 CAUTION! WARNING! Do not use scouring pads, steel wool, a bristle brush, Do not use volatile solvents for cleaning purposes. or metal polishes. Do not use oven cleaner. These Many are potentially flammable and, if used in products may damage the wheel’s protective finish.
Page 546 544 MAINTAINING YOUR VEHICLE equipped with electric defrosters. Do not use scrapers or Seat Belt Maintenance other sharp instruments which may scratch the elements. Do not bleach, dye or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. When cleaning the rearview mirror, spray cleaner on the Sun damage will also weaken the fabric.
Page 547 MAINTAINING YOUR VEHICLE 545 • Avoid leaving your vehicle unattended with the top bristles. If extra cleaning is required, use MOPAR Con- down, as exposure to sun or rain may damage interior vertible Cloth Top Cleaner or equivalent, or a mild trim.
Page 548 MOPAR Jeep Soft Glass Window leak into the vehicle’s interior. Cleaner or equivalent will safely clean all plastic win- •...
Page 549 MAINTAINING YOUR VEHICLE 547 3. Always rinse thoroughly with cold water, then wipe make sure the zipper teeth are clear of sand, mud, and with a soft and slightly moist, clean cloth. other materials. Clean both sides of the zipper, not just one side.
Page 550: Fuses
548 MAINTAINING YOUR VEHICLE FUSES Cavity Cartridge Mini Description Fuse Fuse Totally Integrated Power Module — — The Totally Integrated Power Module is located in the 30 Amp Transfer Case Module engine compartment near the battery. This center contains Pink cartridge fuses, mini fuses and relays.
Page 551 MAINTAINING YOUR VEHICLE 549 Cavity Cartridge Mini Description Cavity Cartridge Mini Description Fuse Fuse Fuse Fuse 40 Amp PZEV Sec Motor/Flex 20 Amp Powertrain Control Green Fuel Blue Module (PCM) Trans Range 30 Amp Headlamp Wash Pink Relay/Manifold 60 Amp Radiator Fan Tuning Valve Yellow...
Page 552 550 MAINTAINING YOUR VEHICLE Cavity Cartridge Mini Description Cavity Cartridge Mini Description Fuse Fuse Fuse Fuse 20 Amp Frt/Rear Axle Locker 15 Amp Ignition Off Draw – Yellow Relay Blue Vehicle Entertainment System, Satellite Digi- — — tal Audio Receiver 25 Amp Power Inverter –...
Page 553 MAINTAINING YOUR VEHICLE 551 Cavity Cartridge Mini Description Cavity Cartridge Mini Description Fuse Fuse Fuse Fuse 20 Amp Ignition Off Draw – 10 Amp Airbag Module Yellow Cabin Compartment Node, Wireless Con- 15 Amp Left Tail/License/ trol Module, SIREN, Blue Park Lamp Multifunction Control 15 Amp...
Page 554 552 MAINTAINING YOUR VEHICLE Cavity Cartridge Mini Description Cavity Cartridge Mini Description Fuse Fuse Fuse Fuse 25 Amp Rear Wiper 20 Amp Backup Lamps Natural Yellow 20 Amp Fuel Pump, Diesel 10 Amp Airbag Controller, TT Yellow Lift Pump – Export EUROPE Only 10 Amp...
Page 555: Vehicle Storage
MAINTAINING YOUR VEHICLE 553 Cavity Cartridge Mini Description CAUTION! (Continued) Fuse Fuse • When replacing a blown fuse, it is important to 10 Amp Anti-Lock Brake use only a fuse having the correct amperage rating. System, Electronic The use of a fuse with a rating other than indicated Stability Control, Stop may result in a dangerous electrical system over- Lamp Switch, Fuel...
Page 556: Replacement Bulbs
554 MAINTAINING YOUR VEHICLE • Anytime you store your vehicle, or keep it out of Exterior Lights Bulb Type service (i.e., vacation) for two weeks or more, run the Backup Lamps (2) ..... . . 3157 air conditioning system at idle for about five minutes Center High-Mounted Stop Lamp (1).
Page 557: Bulb Replacement
MAINTAINING YOUR VEHICLE 555 BULB REPLACEMENT 6. Remove the lamp from the collar. NOTE: Lens fogging can occur under certain atmo- 7. Grasp the bulb and turn 1/4 turn counterclockwise. spheric conditions. This will usually clear as atmospheric 8. Pull the bulb from the housing. conditions change to allow the condensation to change back into a vapor.
Page 558: Front Park/Turn Signal
556 MAINTAINING YOUR VEHICLE Front Park/Turn Signal Front Fog Lamp 1. Remove the front grille. Turn the retainers along the 1. Reach under the vehicle to access the back of the front top 1/4 turn counterclockwise and remove. fog lamp. 2.
Page 559: Rear Tail, Stop, Turn Signal, And Backup Lamp
MAINTAINING YOUR VEHICLE 557 Rear Tail, Stop, Turn Signal, and Backup Lamp 3. Rotate the appropriate socket 1/4 turn counterclock- wise, then remove it from the housing. 1. Remove the two inboard screws attaching the tail light housing to the body. DO NOT REMOVE THE OUTER 4.
Page 560: Fluid Capacities
558 MAINTAINING YOUR VEHICLE FLUID CAPACITIES U.S. Metric Fuel (Approximate) — Two Door Models 18.6 Gallons 70 Liters Fuel (Approximate) — Four Door Models 22.5 Gallons 85 Liters Engine Oil with Filter 3.6 Liter Engine 6 Quarts 5.6 Liters Cooling System * 3.6 Liter Engine (MOPAR Antifreeze/Engine Coolant 5 10.5 Quarts 9.9 Liters...
Page 561: Fluids, Lubricants And Genuine Parts
MAINTAINING YOUR VEHICLE 559 FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOPAR Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent. Engine Oil Use API Certified SAE 5W-30 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395.
Page 562: Chassis
560 MAINTAINING YOUR VEHICLE Chassis Component Fluid, Lubricant, or Genuine Part Automatic Transmission – If MOPAR ATF+4 Automatic Transmission Fluid or equivalent licensed Equipped ATF+4 product. Manual Transmission – If MOPAR Manual Transmission Lubricant or equivalent (meeting the re- Equipped quirements of Chrysler Material Standard MS-9224).
Page 563 MAINTENANCE SCHEDULES CONTENTS Maintenance Schedule ....562 Required Maintenance Intervals ..564...
Page 564 562 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE On Electronic Vehicle Information Center (EVIC) The Scheduled Maintenance services listed in this equipped vehicles “Oil Change Required” will be dis- manual must be done at the times or mileages specified played in the EVIC and a single chime will sound, to protect your vehicle warranty and ensure the best indicating that an oil change is necessary.
Page 565 MAINTENANCE SCHEDULES 563 • Under no circumstances should oil change intervals At Each Stop For Fuel exceed 8,000 miles (13 000 km) or six months, which- • Check the engine oil level about five minutes after a ever comes first. fully warmed engine is shut off.
Page 566 564 MAINTENANCE SCHEDULES Once A Month At Each Oil Change • Check tire pressure and look for unusual wear or • Change the engine oil filter. damage. • Inspect the brake hoses and lines. • Inspect the battery and clean and tighten the terminals •...
Page 567 MAINTENANCE SCHEDULES 565 8,000 Miles (13,000 km) or 16,000 Miles (26,000 km) or 12 Months Maintenance Service 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 568: Service Schedule
566 MAINTENANCE SCHEDULES 24,000 Miles (39,000 km) or 32,000 Miles (52,000 km) or 24 Months Maintenance Service 18 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 569 MAINTENANCE SCHEDULES 567 40,000 Miles (65,000 km) or 48,000 Miles (78,000 km) or 36 Months Maintenance Service 30 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 570 568 MAINTENANCE SCHEDULES 56,000 Miles (91,000 km) or 42 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 56,000 miles (91 000 km). ❏...
Page 571 MAINTENANCE SCHEDULES 569 64,000 Miles (104,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 64,000 miles (104 000 km). ❏...
Page 572 570 MAINTENANCE SCHEDULES 72,000 Miles (117,000 km) or 80,000 Miles (130,000 km) or 60 Months Maintenance Service 54 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 573 MAINTENANCE SCHEDULES 571 88,000 Miles (143,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 88,000 miles (143 000 km). ❏...
Page 574 572 MAINTENANCE SCHEDULES 96,000 Miles (156,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 96,000 miles (156 000 km). ❏...
Page 575 MAINTENANCE SCHEDULES 573 104,000 Miles (169,000 km) or 112,000 Miles (182,000 km) or 84 Months Maintenance Service 78 Months Maintenance Schedule ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 576 574 MAINTENANCE SCHEDULES 120,000 Miles (195,000 km) or 90 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 120,000 miles (195 000 km). ❏...
Page 577 MAINTENANCE SCHEDULES 575 128,000 Miles (208,000 km) or 96 Months Maintenance Service 136,000 Miles (221,000 km) or Schedule 102 Months Maintenance ❏ Service Schedule Change the engine oil and engine oil filter. ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before 128,000 miles ❏...
Page 578 576 MAINTENANCE SCHEDULES 144,000 Miles (234,000 km) or 108 Months Maintenance Service 152,000 Miles (247,000 km) or Schedule 114 Months Maintenance ❏ Change the engine oil and engine oil filter. Service Schedule ❏ Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before ❏...
Page 579 MAINTENANCE SCHEDULES 577 WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic.
Page 581: If You Need Consumer Assistance
IF YOU NEED CONSUMER ASSISTANCE CONTENTS Suggestions For Obtaining Service For Your Customer Assistance For The Hearing Or Vehicle......581 Speech Impaired (TDD/TTY) .
Page 582 580 IF YOU NEED CONSUMER ASSISTANCE Department Of Transportation Uniform Tire Traction Grades ..... 587 Quality Grades ......587 Temperature Grades .
Page 583: Suggestions For Obtaining Service For Your Vehicle
IF YOU NEED CONSUMER ASSISTANCE 581 SUGGESTIONS FOR OBTAINING SERVICE FOR the service advisor and list the items in order of priority. YOUR VEHICLE At many authorized dealers, you may obtain a rental vehicle at a minimal daily charge. If you need a rental, it Prepare For The Appointment is advisable to make these arrangements when you call If you’re having warranty work done, be sure to have the...
Page 584: Chrysler Group Llc Customer Center
582 IF YOU NEED CONSUMER ASSISTANCE This is why you should always talk to an authorized Chrysler Group LLC Customer Center dealer’s service manager first. Most matters can be re- P.O. Box 21–8004 solved with this process. Auburn Hills, MI 48321–8004 Phone: (877) 426–5337 •...
Page 585: Customer Assistance For The Hearing Or Speech Impaired (Tdd/Tty)
IF YOU NEED CONSUMER ASSISTANCE 583 Customer Assistance For The Hearing Or Speech the manufacturer’s service contracts. If you purchased a Impaired (TDD/TTY) manufacturer’s service contract, you will receive Plan To assist customers who have hearing difficulties, the Provisions and an Owner Identification Card in the mail manufacturer has installed special TDD (Telecommuni- within three weeks of the vehicle delivery date.
Page 586: Warranty Information
584 IF YOU NEED CONSUMER ASSISTANCE We appreciate that you have made a major investment WARRANTY INFORMATION when you purchased the vehicle. An authorized dealer See the Warranty Information Booklet, located on the has also made a major investment in facilities, tools, and DVD, for the terms and provisions of Chrysler Group training to assure that you are absolutely delighted with LLC warranties applicable to this vehicle and market.
Page 587: In Canada
IF YOU NEED CONSUMER ASSISTANCE 585 If NHTSA receives similar complaints, it may open an In Canada investigation, and if it finds that a safety defect exists in If you believe that your vehicle has a safety defect, you a group of vehicles, it may order a recall and remedy should contact the Customer Service Department imme- campaign.
Page 588 586 IF YOU NEED CONSUMER ASSISTANCE • Service Manuals • Owner’s Manuals These comprehensive Service Manuals provide the These Owner’s Manuals have been prepared with the information that students and professional technicians assistance of service and engineering specialists to need in diagnosing/troubleshooting, problem solving, acquaint you with specific Chrysler Group LLC ve- maintaining, servicing, and repairing Chrysler Group hicles.
Page 589 IF YOU NEED CONSUMER ASSISTANCE 587 DEPARTMENT OF TRANSPORTATION UNIFORM significantly from the norm due to variations in driving TIRE QUALITY GRADES habits, service practices, and differences in road charac- The following tire grading categories were established by teristics and climate. the National Highway Traffic Safety Administration.
Page 590 588 IF YOU NEED CONSUMER ASSISTANCE Temperature Grades WARNING! The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat The temperature grade for this tire is established for and its ability to dissipate heat, when tested under a tire that is properly inflated and not overloaded.
Page 591 INDEX...
Page 592 590 INDEX ABS (Anti-Lock Brake System) ... . 272,417 Alarm Light ......274 Adding Engine Coolant (Antifreeze) .
Page 593 INDEX 591 Auxiliary Electrical Outlet (Power Outlet) ..162 Calibration, Compass ....286,295 Auxiliary Power Outlet ....162 Capacities, Fluid .
Page 594 592 INDEX Child Restraint ....71,74,78,81 Contract, Service ......583 Child Restraint Tether Anchors .
Page 595 INDEX 593 Defroster, Rear Window ....261 Driving ....... 400 Defroster, Windshield .
Page 596 594 INDEX Emergency, In Case of Oil Filter ......520 Jacking ......493 Oil Selection .
Page 597 INDEX 595 Filters Fold and Tumble Rear Seat ....144 Air Cleaner ......520 Folding Rear Seat .
Page 598 596 INDEX Fuel System Caution ....464,466 Hands-Free Phone (Uconnect™) ....99 Fuses .
Page 599 INDEX 597 Hitches Integrated Power Module (Fuses) ... . 548 Trailer Towing ..... . . 473 Interior Appearance Care .
Page 600 598 INDEX Lane Change and Turn Signals ....270 Cargo ......154 Lane Change Assist .
Page 601 INDEX 599 Lights On Reminder ....152 Locks Low Fuel ......269 Automatic Door .
Page 602 600 INDEX Methanol ......462 Odometer ......277,283 Mini-Trip Computer .
Page 603 INDEX 601 Outside Rearview Mirrors ....97 Power Overdrive ......392 Door Locks .
Page 604 602 INDEX Rearview Mirrors ......96 Reporting Safety Defects ....584 Recorder, Event Data .
Page 605 INDEX 603 Child Restraint ....71,72,81 Security Against Theft ..... 19 Extender .
Page 606 604 INDEX Shoulder Belt Upper Anchorage ....52 Remote ......26 Shoulder Belts .
Page 607 INDEX 605 Tachometer ......273 Inflation Pressures ....445 Temperature Control, Automatic (ATC) .
Page 608 606 INDEX Disabled Vehicle ..... 507 Transmission Guide ......474 Automatic .
Page 609 INDEX 607 Untwisting Procedure, Seat Belt ....52 Warranty Information ..... 584 Upholstery Care .
Page 610 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use only frequency signals.
Page 611 Chrysler Group LLC 12JK72-126-AC 3rd Edition Printed in U.S.A.

This manual is also suitable for:

2012 wrangler Wrangler 2011 2012 wrangler unlimited

Jeep Wrangler Owner's Manual

Introduction 1

Things to Know before Starting Your Vehicle

Understanding the Features of Your Vehicle

Understanding Your Instrument Panel

Starting and Operating

Quick Links

Chapters

Related Manuals for Jeep Wrangler

Summary of Contents for Jeep Wrangler