Jeep 1987 Wrangler Workshop Manual page 1248

T.C. 231 TRANSFER CASE
OVERHAUL
Install a replacement input gear snap ring (10).
101706
Install a replacement oil seal in the front bearing
retainer (10) with tool J-33831.
J-33831
101705
Apply a 3 mm (1/8 inch) wide bead of sealer to
the seal surface of the front bearing retainer
(11). Use Jeep Gasket-ln-A-Tube sealer or an
equivalent RTV-type sealer.
Install the front bearing retainer (11) on the front
case. Tighten the retainer bolts to specified
torque.
101707
Install a replacement sector shaft O-ring (12)
and bushing (13) in the case bore.
101708
1 8