Table of Contents
Advertisement
8F - 12
AUDIO SYSTEMS
REMOVAL AND INSTALLATION (Continued)
Fig. 16 Engine-To-Body Ground Strap Remove/
1 – SCREW
2 – DASH PANEL
3 – ENGINE CYLINDER HEAD
4 – STUD
5 – NUT
6 – GROUND STRAP
(2) Remove the nut that secures the engine-to-body
ground strap eyelet to the stud on the left upper rear
corner of the engine cylinder head.
(3) Remove the engine-to-body ground strap eyelet
from the stud on the left upper rear corner of the
engine cylinder head.
Install
(4) Remove the engine-to-body ground strap from
the engine compartment.
INSTALLATION
ENGINE-TO-BODY GROUND STRAP
(1) Position the engine-to-body ground strap in the
engine compartment.
(2) Position the engine-to-body ground strap eyelet
over the stud on the left upper rear corner of the
engine cylinder head.
(3) Install and tighten the nut that secures the
engine-to-body ground strap eyelet to the stud on the
left upper rear corner of the engine cylinder head.
Tighten the nut to 27 N·m (20 ft. lbs.).
(4) Install and tighten the screw that secures the
engine-to-body ground strap eyelet to the dash panel.
Tighten the screw to 27 N·m (20 ft. lbs.).
SPECIAL TOOLS
AUDIO SYSTEMS
Antenna Nut Wrench C-4816
XJ
Advertisement
Table of Contents
Troubleshooting
