m
G
THROTTLE BODY FUEL INJECTION SYSTEM
m
G
m
G
1.4L 1986-1987/1.7L/2.46L
m
G
Coolant Temperature Sensor (CTS) (Renault)
N O T E : T h e C T S s e n s o r (A) is located at the rear
of the intake manifold.
Removal
R e m o v e the wire h a r n e s s connector from the
C T S .
W A R N I N G : Do not remove the C T S with the
cooling system hot and pressurized b e c a u s e
serious burns from coolant c a n occur.
R e m o v e the C T S from the intake manifold and
rapidly plug the hole to prevent loss of coolant.
A
R E N A U L T M O D E L S
N O T E : 1986 a n d later models u s e a C T S with a
pigtail h a r n e s s and a connector.
Connect the wire h a r n e s s connector to the C T S .
Coolant Temperature Sensor (CTS) (Jeep)
N O T E : T h e C T S s e n s o r (A) is located at the rear
of the intake manifold.
Removal
R e m o v e the wire h a r n e s s connector from the
C T S .
W A R N I N G : Do not remove the C T S with the
cooling system hot and under pressure b e c a u s e
serious burns from coolant c a n occur.
R e m o v e the C T S from the intake manifold and
rapidly plug the hole to prevent loss of coolant.
A
101451G-1
Installation
Install the r e p l a c e m e n t C T S in the intake
manifold.
8 2