Jeep 1987 Wrangler Workshop Manual page 1384

BA 10/5 MANUAL TRANSMISSION
2*48
OVERHAUL
C A U T I O N : Do not e x c e e d 3000 kg. (6600 lbs.)
force w h e n p r e s s i n g the bearing onto the
mainshaft.
101098
Install the third gear needle bearing (21) and the
third gear (22) on the front of the mainshaft.
Install the third-fourth synchronizer hub (24) on
the mainshaft but do not install the synchronizer
at this time.
Position a replacement spring w a s h e r (25) and
lock ring (26) on the mainshaft.
101099
S e a t the lock ring (26) a s follows:
• Mount the mainshaft in an arbor press.
• Place tool B.V.I. F M . 13 over the end of the
mainshaft and against the lock ring (26).
• Apply just enough press pressure to align the
lock ring with the groove in the mainshaft.
• S e c u r e the lock ring (26) in the groove by
compressing it with pliers.
• R e l e a s e the press and remove the press tools
and mainshaft.
26