Jeep 1987 Wrangler Workshop Manual page 1246

T.C. 231 TRANSFER CASE
OVERHAUL
M i * i M
SEE
1.8.
N
O
T
E
S
• Install the snap ring (2) on the replacement
bearing.
• Install the bearing (3) into the case with tool
J-29170 and a wood block. Install the bearing
far enough into the case to seat the snap ring
(2) against the case.
101672
Replace the input gear pilot bearing as follows:
• Remove the pilot bearing with slide hammer
J-2619-01 and tool J-29369-1.
J-2619-01
J-29369-1
84298
• Install the replacement pilot bearing with
driver handle J-8092 and tool J-33829.
84311
16