Front Side Marker Lamp Removal; Front Side Marker Lamp Installation; Taillamp Removal; Taillamp Cleaning - Jeep 1987 Wrangler Workshop Manual

ELECTRICAL
EXTERIOR LIGHTING SYSTEM
FRONT SIDE MARKER LAMP REMOVAL
Reach under the fender and twist the socket (A)
one-quarter turn counterclockwise to remove
socket from the housing.
Pull the defective lamp (B) from the socket.
101357
FRONT SIDE MARKER LAMP INSTALLATION
Install the Lamp in the socket.
Twist the socket one-quarter turn clockwise.
Return assembly to location under the fender.
TAILLAMP REMOVAL
Remove the lens attaching screws (D), taillamp
tens (E), and lens gasket (C).
Remove any defective lamps, (B), (F), and/or
(G), located in the taillamp housing (A):
• backup lamp (B)
• tail-stop directional lamp (F)
• side marker lamp (G).
A. Taillamp Housing
B. Backup Lamp
C. Lens Gasket
D. Attaching Screw(s)
E. Taillamp Lens
TAILLAMP CLEANING
841291
F. Tail-Stop
Directional/
License Plate
Lamp
G. Side Marker Lamp
Clean the lens and reflector before installing
replacement taillamp.
C-114