Overrunning Clutch And Planetary Gear Installation - Jeep 1987 Wrangler Workshop Manual

ELECTRICAL
STARTING SYSTEM - BOSCH (4-Cyl. Engine)
Overrunning Clutch and Planetary
Gear Installation
Lube the bearing with 20W S A E oil.
Insert the planetary gear train with the pinion,
overrunning clutch, fork lever, and bearing
pedestal (4) into the drive end bearing housing.
100833
NOTE: The bevelled part of the ring gear (5)
points toward the bearing pedestal/relay.
Insert the rubber seal (6).
Position the cover plate (7) on the ring gear so
that the recess on the cover plate is seated in the
lug (8) on the ring gear.
•
S E E
I.S.
N
O
T
E
S
100834
C-69