Jeep 1987 Wrangler Workshop Manual page 818

STEERING AN® FRONT M L E
fit
STEERING COLUMN SERVICE
fit
Remove the lock bolt, lock rack and rack preload
spring from the tilt housing.
Insert a wedge (E) between the lock shoes (27)
and the tilt housing.
840338A
Remove the tilt lever pin with a pin punch (F) or
tool J 22635.
Remove the lock shoe pin from the support with
a pin punch or tool J 22635 and remove the lock
shoes (27), springs (28) and wedge (E).
27 28 84733A
Remove the upper and lower bearings from the
housing only if worn or damaged.
Remove the steering shaft (29) through the
upper end of the column.
840337A
48