Jeep 1987 Wrangler Workshop Manual page 1315

AUTOMATIC TRANSMISSIONS
OVERHAUL
Thread the Bushing Installer Tool J-24038 onto
Driver Handle J-8092.
J-24040
J-24038
84508
Position the replacement bushing on the
installer tool and install the bushing straight into
the shaft bore until the tool bottoms.
Assembly
Install the pump rotors in the housing.
Install the reaction shaft support and tighten the
attaching bolts to 18 N-m (160 in-lbs) torque.
Install the O-ring seal around the pump housing
flange.
Install the oil seal pump housing with the seal lip
facing inward.
Install the oil seal on Installer Tool J-21005.
Install the seal straight into the housing until the
tool bottoms.
Thoroughly clean the reaction shaft support
assembly.
SEI
I.S.
N
O
T
E
S
5 5