Taillamp Installation; Rear Side Marker Lamp Removal; Rear Side Marker Lamp Cleaning; Rear Side Marker Lamp Installation - Jeep 1987 Wrangler Workshop Manual

ELECTRICAL
EXTERIOR LIGHTING SYSTEM ^ ^ ^ ^
TAILLAMP INSTALLATION
Install a replacement taillamp in the socket.
Attach the lens gasket (C) and attaching screws
(D) .
Taillamp Housing
Renewal
Disconnect the wiring.
Remove the taillamp lens (E).
Remove the attaching screws (D) which hold the
taillamp assembly to the body.
Pull the taillamp assembly out and away from
the body of the vehicle.
Taillamp Rousing Installation
Position the taillamp assembly and align with
corresponding screw holes.
Install the attaching screws (D).
Connect the wiring.
REAR SIDE MARKER LAMP REMOVAL
Remove the attaching screws (D), taillamp lens
(E) and lens gasket (C).
Pull the side marker lamp (G) straight out of the
socket.
REAR SIDE MARKER LAMP CLEANING
Clean the lens and reflector before installing
replacement lamp.
841291
A. Taillamp Housing F. Tail-Stop
B. Backup Lamp Directional/
C. Lens Gasket License Plate
D. Attaching Screw(s) Lamp
E. Taillamp Lens G. Side Marker Lamp
REAR SIDE MARKER LAMP INSTALLATION
Install a replacement lamp. Push the lamp
straight into the socket.
Position the lens gasket (C) and taillamp lens
(E).
Install the attaching screws (D).
C=1
15