Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1587

For ex series ethernet switches
Table of Contents

Advertisement

Table 219: show interfaces xe- Output Fields (continued)
Field Name
Field Description
If IPv6 statistics tracking is enabled, number of IPv6 bytes and packets received
IPv6 transit
and transmitted on the logical interface:
statistics
Input bytes
Output bytes
Input packets
Output packets
Input errors on the interface:
Input errors
Errors
Drops
ASIC. If the interface is saturated, this number increments once for every
packet that is dropped by the ASIC's RED mechanism.
Framing errors
(FCS).
Runts
Policed discards
discarded because they were not recognized or not of interest. Usually, this
field reports protocols that the Junos OS does not handle.
L3 incompletes
Layer 3 sanity checks of the header. For example, a frame with less than
20 bytes of available IP header is discarded. L3 incomplete errors can be
ignored if you configure the
L2 channel errors
interface for an incoming frame.
L2 mismatch timeouts
the incoming packet handler to discard the frame as unreadable.
FIFO errors
by the ASIC on the PIC. If this value is ever nonzero, the PIC is probably
malfunctioning.
Resource errors
Copyright © 2010, Juniper Networks, Inc.
—Number of bytes received on the interface.
—Number of bytes transmitted on the interface.
—Number of packets received on the interface.
—Number of packets transmitted on the interface.
—Sum of the incoming frame aborts and FCS errors.
—Number of packets dropped by the input queue of the I/O Manager
—Number of packets received with an invalid frame checksum
—Number of frames received that are smaller than the runt threshold.
—Number of frames that the incoming packet match code
—Number of incoming packets discarded because they failed
ignore-l3-incompletes
—Number of times the software did not find a valid logical
—Number of malformed or short packets that caused
—Number of FIFO errors in the receive direction that are reported
—Sum of transmit drops.
Chapter 62: Operational Commands for Interfaces
Level of Output
detail
extensive
extensive
statement.
1483

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos os 10.4

Table of Contents