Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1565

For ex series ethernet switches
Table of Contents

Advertisement

Table 216: show interfaces ge- Output Fields (continued)
Field Name
Field Description
Unique number for use by Juniper Networks technical support only.
Generation
Information about the logical interface.
Flags
Encapsulation on the logical interface.
Encapsulation
Protocol family.
Protocol
Number and rate of bytes and packets received (input) and transmitted (output)
Traffic statistics
on the specified interface.
IPv6 transit
If IPv6 statistics tracking is enabled, number of IPv6 bytes and packets received
and transmitted on the logical interface.
statistics
Local statistics
Number and rate of bytes and packets destined to and from the switch.
Transit statistics
Number and rate of bytes and packets transiting the switch.
Generation
Unique number for use by Juniper Networks technical support only.
Route table in which the logical interface address is located. For example,
Route Table
refers to the routing table
Input Filters
Names of any input filters applied to this interface.
Output Filters
Names of any output filters applied to this interface.
Information about protocol family flags.
Flags
If unicast reverse-path forwarding (RPF) is explicitly configured on the specified
interface, the uRPF flag is displayed. If unicast RPF was configured on a different
interface (and therefore is enabled on all switch interfaces) but was not explicitly
configured on the specified interface, the uRPF flag is not displayed even though
unicast RPF is enabled.
protocol-family
Protocol family configured on the logical interface. If the protocol is
address of the interface is also displayed.
Flags
Information about the address flags.
Destination
IP address of the remote side of the connection.
IP address of the logical interface.
Local
Broadcast address of the logical interlace.
Broadcast
Unique number for use by Juniper Networks technical support only.
Generation
Copyright © 2010, Juniper Networks, Inc.
inet.0
.
Chapter 62: Operational Commands for Interfaces
Level of Output
detail extensive
All levels
All levels
detail extensive
detail extensive
extensive
extensive
extensive
detail extensive
0
detail extensive
detail extensive
detail extensive
detail extensive
inet
, the IP
brief
detail extensive
detail extensive
detail extensive
detail extensive
detail extensive
none
none
none
none
none
none
1461

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos os 10.4

Table of Contents