Table 219: Show Interfaces Xe- Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

Table 219: show interfaces xe- Output Fields

Field Name Field Description
Fields for the Terse Output Level Only
Interface Name of the physical or logical interface.
Administrative state of the interface.
Admin
State of the physical link.
Link
Protocol family configured on the logical interface.
Proto
Local IP address of the logical interface.
Local
Remote IP address of the logical interface.
Remote
Fields for the Physical Interface
Physical interface Name of the physical interface.
Enabled State of the interface. Can be one of the following:
Adminstratively down, Physical link is Down
the physical link is inoperable and cannot pass packets even when it is
enabled.
Adminstratively down, Physical link is Up
physical link is operational and can pass packets when it is enabled.
Enabled, Physical link is Down
link is inoperable and cannot pass packets.
Enabled, Physical link is Up
is operational and can pass packets.
Index number of the physical interface, which reflects its initialization sequence.
Interface index
SNMP index number for the physical interface.
SNMP ifIndex
Unique number for use by Juniper Networks technical support only.
Generation
User-configured interface description.
Description
1480
®
OS for EX Series Ethernet Switches, Release 10.4
—The interface is turned on, but the physical
—The interface is turned on, and the physical link
—The interface is turned off, and
—The interface is turned off, but the
Copyright © 2010, Juniper Networks, Inc.
Level of Output
terse
terse
terse
terse
terse
terse
brief
detail
extensive
none
brief
detail
extensive
none
detail
extensive
none
detail
extensive
none
detail
extensive
brief
detail
extensive
none