Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1577

show interfaces queue
Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Table 218: show interfaces queue Output Fields
Field Name
Physical Interface and Forwarding Class Information
Copyright © 2010, Juniper Networks, Inc.
show interfaces queue
<both-ingress-egress>
<egress>
<forwarding-class forwarding-class>
<ingress>
<interface-name interface-name>
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display class-of-service (CoS) queue information for physical interfaces.
—Show detailed CoS queue statistics for all physical interfaces.
none
both-ingress-egress —(Optional) Show both ingress and egress queue statistics. (Ingress
statistics are not available for all interfaces.)
—(Optional) Show eqress queue statistics only.
egress
forwarding-class forwarding-class
forwarding class.
—(Optional) Show ingress queue statistics only. (Ingress statistics are not available
ingress
for all interfaces.)
interface-name interface-name
interface.
view
Monitoring Interface Status and Traffic on page 1345
Monitoring Interfaces That Have CoS Components on page 3457
Defining CoS Schedulers (CLI Procedure) on page 3437
Configuring CoS Traffic Classification for Ingress Queuing on 40-port SFP+ Line Cards
(CLI Procedure) on page 3453
show interfaces queue ge-0/0/0 (EX2200 Switch) on page 1475
show interfaces queue xe-6/0/39 (40-port SFP+ Line Card in an EX8200
Switch) on page 1476
Table 218 on page 1473 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
Field Description
Chapter 62: Operational Commands for Interfaces
—(Optional) Show queue statistics only for the specified
—(Optional) Show queue statistics for the specified
show interfaces queue command.
1473