Monitoring Routing Policy - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP SERVICES CONFIGURATION GUIDE 2010-10-01 Configuration Manual

JunosE 11.3.x IP Services Configuration Guide

Monitoring Routing Policy

show access-list
show ipv6 access-list
48
You can monitor the following aspects of routing policy using show commands:
To Display
Access lists
Community lists
Policy lists
Prefix lists
Prefix trees
Protocols
Redistribution policies
Routes
Route maps
Interfaces and next hops
Static routes
Traffic
You can use the output filtering feature of the show command to include or exclude lines
of output based on a text string that you specify. For details, see Command Line Interface
in JunosE System Basics Configuration Guide.
Use to display information about access lists.
The displayed information includes the instances of each access list.
Use the detail keyword to display the automatically assigned element ID for each
access list entry. Only rules that you explicitly create have element IDs.
Example 1
host1#show access-list
IP Access List 1:
permit ip host 172.31.192.217 any
permit ip 12.40.0.0 0.0.0.3 any
Commands
show access-list
show ip as-path access-list
show ipv6 access-list
show ip community-list
show ip match-policy-list
show ip prefix-list
show ip prefix-tree
show ip protocols
show ip redistribute
show ip route
show route-map
show ip route slot 5 192.168.5.4
show ip static
show ip traffic
Copyright © 2010, Juniper Networks, Inc.