Table of Contents
Advertisement
Complete Software Guide for Junos
Required Privilege
Level
List of Sample Output
Output Fields
Table 211: monitor interface Output Fields
Field Name
Field Description
Hostname of the router.
router1
How long the monitor interface command has been running or how long since
Seconds
you last cleared the counters.
Time
Current time (UTC).
Delay x/y/z
Time difference between when the statistics were displayed and the actual
clock time.
x
—Time taken for the last polling (in milliseconds).
y
—Minimum time taken across all pollings (in milliseconds).
—Maximum time taken across all pollings (in milliseconds).
z
Interface
Short description of the interface, including its name, status, and encapsulation.
State of the link:
Link
1432
®
OS for EX Series Ethernet Switches, Release 10.4
Table 210: Output Control Keys for the monitor interface traffic Command
Key
Action
b
Displays the statistics in units of bytes and bytes per second (bps).
c
Clears (return to 0) the delta counters in the
counters are not cleared.
d
Displays the
per second (pps).
p
Displays the statistics in units of packets and packets per second (pps).
q or Esc
Quits the command and returns to the command prompt.
r
Displays the rate column (instead of the
trace
monitor interface (Physical) on page 1433
monitor interface (OTN Interface) on page 1435
monitor interface (Logical) on page 1436
monitor interface traffic on page 1436
monitor interface traffic detail on page 1437
Table 211 on page 1432 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
,
, or
.
Up
Down
Test
Current Delta
column (instead of the rate column) in bps or packets
Current Delta
Current Delta
column. The statistics
column) in bps and pps.
command.
monitor interface
Level of Output
All levels
All levels
All levels
All levels
All levels
All levels
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Chapters
Table of Contents
Troubleshooting
