Traps - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Required Privilege
Level
Related
Documentation

traps

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
—(Optional) Maximum size of each trace file, in kilobytes (KB), megabytes (MB),
size size
or gigabytes (GB). When a trace file named
trace-file.0. When the trace-file
and
trace-file.1 trace-file
until the maximum number of trace files is reached. Then, the oldest trace file is
overwritten.
If you specify a maximum file size, you also must specify a maximum number of trace
files with the files option.
Syntax: xk to specify kilobytes,
Range: 10 KB through the maximum file size supported on your router
Default: 1 MB
—(Optional) Allow any user to read the log file.
world-readable
—(Optional) Refine the output to include only those lines that match the
match regex
given regular expression.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Tracing Operations of the Interface Process on page 1343
(traps | no-traps);
[edit interfaces interface-name],
[edit interfaces interface-name unit logical-unit-number],
[edit interfaces interface-range name],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Enable or disable the sending of Simple Network Management Protocol (SNMP)
notifications when the state of the connection changes.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Enabling or Disabling SNMP Notifications on Physical Interfaces on page 1330
Enabling or Disabling SNMP Notifications on Logical Interfaces on page 1329
Chapter 61: Configuration Statements for Interfaces
trace-file
again reaches its maximum size,
is renamed . This renaming scheme continues
trace-file.0
xm to specify megabytes, or
reaches this size, it is renamed
trace-file.0 is renamed
xg to specify gigabytes
1423