R&S ESU Series Operating Manual page 99

R&S ESU
NEXT MIN The NEXT MIN RIGHT softkey sets the active marker/delta marker to the next
RIGHT higher minimum value to the right of the current marker position on the correspond-
ing trace.
Remote command:
NEXT MIN The NEXT MIN LEFT softkey sets the active marker/delta marker to the next higher
LEFT minimum value to the left of the current marker positionon the corresponding trace.
Remote command:
SETTINGS The SETTINGS COUPLED softkey couples the receiver frequency settings from the
COUPLED corresponding subscans to the marker frequency for functions TUNE TO MARKER
and MARKER TRACK.
Remote command:
SEARCH The SEARCH LIMITS softkey limits the search range for maximum or minimum
LIMITS search. The softkey switches to a submenu in which the search range limits can be
set in the x and y direction.
LEFT LIMIT RIGHT LIMIT
THRESHOLD
SEARCH LIMIT OFF
LEFT LIMIT The LEFT LIMIT and RIGHT LIMIT softkeys define the two vertical lines F1 and F2
RIGHT LIMIT in the frequency domain (span > 0) and T1 / T2 in the time domain (span = 0). The
search is performed between these lines in the frequency and time domain.
If only LEFT LIMIT is enabled, line F1/T1 is the lower limit and the upper limit corre-
sponds to the stop frequency. If RIGHT LIMIT is also enabled, it determines the
upper limit.
Remote command:
THRESHOLD The THRESHOLD softkey defines the threshold line.
The threshold line represents a limit for the level range of the max. search at the
lower end and that of the min. search at the upper end.
Remote command:
SEARCH LIMIT The SEARCH LIMIT OFF softkey disables all limits of the search range.
OFF
Remote command:
4.68
CALC:MARK:MIN:RIGH
CALC:DELT:MIN:RIGH
CALC:MARK:MIN:LEFT
CALC:DELT:MIN:LEFT
:CALC:MARK:SCO ON
CALC:MARK:X:SLIM:LEFT 1MHZ
CALC:MARK:X:SLIM:RIGH 10MHZ
CALC:MARK:X:SLIM ON
CALC:THR -20dBm
CALC:THR ON
CALC:MARK:X:SLIM OFF
CALC:THR OFF
Operating Manual 1302.6163.12 - 03
Instrument Functions
Receiver Mode