R&S ESU Series Operating Manual page 731

R&S ESU
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
Devices Command (Sheet 4 of 47)
R&S FSE CALCulate<1|2>:DELTamarker<1...4>:TRACe
ESU
R&S FSE CALCulate<1|2>:DELTamarker<1...4>:X
ESU
R&S FSE CALCulate<1|2>:DELTamarker<1...4>:X:RELative
ESU
R&S FSE CALCulate<1|2>:DELTamarker<1...4>:Y?
ESU
R&S FSE CALCulate<1|2>:DELTamarker<1...4>[:STATe]
ESU
R&S FSE CALCulate<1|2>:DLINe<1|2>
ESU
R&S FSE CALCulate<1|2>:DLINe<1|2>:STATe
ESU
FSE CALCulate<1|2>:FEED
FSET CALCulate<1|2>:FEED
R&S FSE CALCulate<1|2>:FLINe<1|2>
ESU
R&S FSE CALCulate<1|2>:FLINe<1|2>:STATe
ESU
FSE CALCulate<1|2>:FORMat
FSE CALCulate<1|2>:FSK:DEViation:REFerence
FSE CALCulate<1|2>:LIMit<1...8>:ACPower:ACHannel
6.292
Remote Control – Description of Commands
Parameter Notes
1 to 3 R&S ESU: 3 traces are
available per screen;
FSE: 4 traces are
available in full screen
mode and 2 traces per
screen in split screen
mode
0 to MAX (frequency | unit 'SYM' is not
sweep time) available for R&S ESU
ON | OFF
MIN to MAX
ON | OFF
'XTIM:DDEM:MEAS' | not available for
'XTIM:DDEM:REF' | R&S ESU
'XTIM:DDEM:ERR:MPH'
| 'XTIM:DDEM:ERR:
VECT' | 'XTIM:DDEM:
SYMB' | 'XTIM:AM' |
'XTIM:FM' | 'XTIM:PM' |
'XTIM:AMSummary' |
'XTIM:FMSummary'
|'XTIM:PMSummary' |
'TCAP'
'XTIM:DDEM:MEAS' | not available for
'XTIM:DDEM:REF' | R&S ESU
'XTIM:DDEM:ERR:MPH'
| 'XTIM:DDEM:ERR:
VECT' | 'XTIM:DDEM:
SYMB' | 'TCAP'
0 to f
max
ON | OFF
MAGNitude | PHASe | not available for
UPHase | RIMag | R&S ESU
FREQuency | IEYE |
QEYE | TEYE | FEYE |
COMP | CONS
<numeric value> not available for
R&S ESU
0 to 100 DB, compatible to
0 to 100 DB CALCulate<1|2>:
LIMit<1...8>:ACPower:
ACHannel [:RELative] of
R&S ESU
not available for FSET
Operating Manual 1302.6163.12 - 03