R&S ESU Series Operating Manual page 767

R&S ESU
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
Devices Command (Sheet 40 of 47)
ESIB [SENSe<1|2>:]SCAN<1...10>:INPut:GAIN[:
STATE]
ESIB [SENSe<1|2>:]SCAN<1...10>:INPut:TYPE
FSET [SENSe<1|2>:]SCAN<1...10>:INPut:TYPE
FSET/ [SENSe<1|2>:]SCAN<1...10>:STARt
ESIB
FSET/ [SENSe<1|2>:]SCAN<1...10>:STEP
ESIB
FSET/ [SENSe<1|2>:]SCAN<1...10>:STOP
ESIB
FSET/ [SENSe<1|2>:]SCAN<1...10>:TIME
ESIB
R&S FSE [SENSe<1|2>:]SWEep:COUNt
ESU
R&S FSE [SENSe<1|2>:]SWEep:EGATe
ESU
R&S FSE [SENSe<1|2>:]SWEep:EGATe:HOLDoff
ESU
R&S FSE [SENSe<1|2>:]SWEep:EGATe:LENGth
ESU
FSE [SENSe<1|2>:]SWEep:EGATe:LENGth
FSE [SENSe<1|2>:]SWEep:EGATe:LEVel
R&S FSE [SENSe<1|2>:]SWEep:EGATe:POLarity
ESU
R&S FSE [SENSe<1|2>:]SWEep:EGATe:SOURce
ESU
R&S FSE [SENSe<1|2>:]SWEep:EGATe:TYPE
ESU
FSE [SENSe<1|2>:]SWEep:GAP
FSE [SENSe<1|2>:]SWEep:GAP:LENGth
FSE [SENSe<1|2>:]SWEep:GAP:PRETrigger
FSE [SENSe<1|2>:]SWEep:GAP:TRGTogap
R&S [SENSe<1|2>:]SWEep:POINts
ESU
FSET/ [SENSe<1|2>:]SWEep:SPACing
ESIB
FSE/ [SENSe<1|2>:]SWEep:SPACing
FSIQ
6.328
Remote Control – Description of Commands
Parameter Notes
ON | OFF not available for
R&S ESU
INPUT1 | INPUT2 not available for
R&S ESU
RF | BALanced not available for
R&S ESU
f to f not available for
min max
R&S ESU
f to f not available for
min max
R&S ESU
f to f not available for
min max
R&S ESU
100 µs to 100 s not available for
R&S ESU
0 to 32767
ON | OFF
0 to 100s
0 to 100s
0 to 100s
-5V to +5V not availabe for
R&S ESU
POSitive | NEGative
EXTernal | IFPower |
RFPower
LEVel | EDGE
ON | OFF not available for
R&S ESU
0 to 100s not available for
R&S ESU
0 to 100s not available for
R&S ESU
0 to 100s not available for
R&S ESU
<numeric_value> not available for FSE
LINear | LOGarithmic | not available for
AUTO R&S ESU
LINear | LOGarithmic not available for
R&S ESU
Operating Manual 1302.6163.12 - 03