R&S ESU Series Operating Manual page 220

R&S ESU
ACP REF The ACP REF SETTINGS softkey opens a table for selecting the transmission chan-
SETTINGS nel to which the adjacent-channel relative power values should be referenced.
A C P R E F E R E N C E C H A N N E L
T X C H A N N E L 1
T X C H A N N E L 2
T X C H A N N E L 3
T X C H A N N E L 4
T X C H A N N E L 5
T X C H A N N E L 6
T X C H A N N E L 7
T X C H A N N E L 8
T X C H A N N E L 9
T X C H A N N E L 1 0
T X C H A N N E L 1 1
T X C H A N N E L 1 2
M I N P O W E R T X C H A N N E L
M A X P O W E R T X C H A N N E L
L O W E S T & H I G H E S T C H A N N E L
TX CHANNEL 1 - 12
MIN POWER TX
CHANNEL
MAX POWER TX
CHANNEL
LOWEST & HIGHEST
CHANNEL
The softkey is available only for multi carrier ACP measurements.
Remote command:
Operating Manual 1302.6163.12 - 03
Selection of one of the channels.
The transmission channel with the lowest power is used as
a reference channel.
The transmission channel with the highest power is used as
a reference channel.
The outer left hand transmission channel is the reference
channel for the lower adjacent channels, the outer right
hand transmission channel that for the upper adjacent chan-
nels.
SENS:POW:ACH:REF:TXCH:MAN 1
SENS:POW:ACH:REF:TXCH:AUTO MIN
Instrument Functions
Analyzer Mode
4.189