R&S ESU Series Operating Manual page 69

R&S ESU
Out-of-limit value for INTERACTIVE
If an out-of-limit value is detected, the R&S ESU automatically goes to the HOLD
SCAN state and starts the final measurement. The HOLD FINAL MEAS
for INTER ACTIVE
the R&S ESU continues the prescan, and the HOLD SCAN submenu is displayed
again.
FINAL MEAS
The FINAL MEAS softkey opens the following submenu (receiver mode):
PEAK SEARCH
EDIT PEAK LIST
NO OF PEAKS
PEAKS SUBRANGES
MARGIN
FINAL MEAS TIME
AUTOMATIC FINAL
INTER ACTIVE
RUN FINAL MEAS
ESH2-Z5 | ESH3-Z5 |
ENV 4200 | ENV 216 |
OFF
PRESCAN PHASES |
FINAL PHASES
RUN FINAL MEAS
*) Dependent on the selected measurement mode AUTOMATIC FINAL or INTER ACTIVE.
4.38
submenu comes up. On completion of the final measurement,
!
EDIT FREQUENCY
INSERT
DELETE
SORT BY
FREQUENCY
SORT BY DELTALIMIT
ASCII FILE EXPORT
DECIM SEP
PAGE UP
PAGE DOWN
PHASE N | PHASE L1 |
!
PHASE L2 | PHASE L3
150 KHZ HIGHPASS
PE GROUNDED | PE
FLOATING
!
HOLD FINAL MEAS
STOP FINAL MEAS
Instrument Functions
!
AUTOMATIC FINAL
INTER ACTIVE
SIKP FREQUENCY*
GET MAXHOLD*
MEASURE
STOP FINAL MEAS
Operating Manual 1302.6163.12 - 03
Receiver Mode
Sequence