R&S ESU Series Operating Manual page 659

R&S ESU
6.17 SOURce Subsystem
The SOURce subsystem controls the output signals of the instrument if the options tracking generator
(B9) or External Generator Control (B10) are installed. The measurement window is selected by
SOURce1 (screen A) and SOURce2 (screen B).
6.17.1 Internal Tracking Generator
SOURce<1|2>:AM:STATe ON | OFF
This command switches on or off the external amplitude modulation of the tracking generator in the
selected measurement window.
External I/Q modulation is switched off, if active. This command is only valid in conjunction with the
tracking generator option B9.
Example:
"SOUR:AM:STAT ON"
'Switches on the external amplitude modulation of the tracking generator for
screen A.
Characteristics: *RST value: OFF
SCPI: conform
Mode: R, A
SOURce<1|2>:DM:STATe ON | OFF
This command switches on or off the external I/Q modulation of the tracking generator in the selected
measurement window.
External AM and external FM are switched off, if active. This command is only valid in conjunction with
the tracking generator option B9.
Example:
"SOUR2:DM:STAT ON"
'Switches on the external I/Q modulation of the tracking generator for screen B.
Characteristics: *RST value: OFF
SCPI: conform
Mode: R, A
SOURce<1|2>:FM:STATe ON | OFF
This command switches on or off the external frequency modulation of the tracking generator in the
selected measurement window.
External I/Q modulation is switched off, if active. This command is only valid in conjunction with the
tracking generator option B9.
Example:
"SOUR:FM:STAT ON"
'Switches on the external frequency modulation of the tracking generator for
screen A.
Characteristics: *RST value: OFF
SCPI: conform
Mode: R, A
6.220
Remote Control – Description of Commands
Operating Manual 1302.6163.12 - 03
SOURce Subsystem