R&S ESU Series Operating Manual page 284

R&S ESU
DISP The DISP key opens the menu for configuring the screen display and selecting the
active diagram in SPLIT SCREEN mode.
FULL SCREEN
SPLIT SCREEN
PARAM COUPLING
REF LEVEL COUPLED
(Analyzer Mode only)
CENTER B = MARKER A |
CENTER A = MARKER B
(Analyzer Mode only)
BARGRAPH MAXHOLD
(Receiver Mode only)
BARGRAPH RESET
(Receiver Mode only)
CONFIG DISPLAY
FULL SCREEN The FULL SCREEN softkey selects the display of one diagram. In analyzer mode, it
is possible to switch between two different device settings by selecting the active
window (screen A or screen B). In receiver mode, the full screen displays the scan.
Switching between SCREEN A and SCREEN B is performed by means of the corre-
sponding key in the hotkey bar (for details refer to
page
It should be noted that the measurements in the FULL SCREEN mode are per-
formed only in the visible (active) window.
Operating Manual 1302.6163.12 - 03
COUPLING TABLE
DEFAULT CONFIG
ENABLE ALL ITEMS
DISABLE ALL ITEMS
!
SCREEN TITLE
TIME+DATE ON/OFF
LOGO ON/OFF
ANNOTATION ON/OFF
DATA ENTRY OPAQUE
DEFAULT COLORS 1/
DEFAULT COLORS 2
DISPLAY PWR SAVE
Side menu
SELECT OBJECT
BRIGHTNESS
TINT
SATURATION
PREDEFINED COLORS
4.9).
Instrument Functions
Basic Settings
"Mode Selection – Hotkey Bar" on
4.253