R&S ESU Series Operating Manual page 314

R&S ESU
Serial Interface Configuration
COM The COM INTERFACE softkey activates the COM INTERFACE table for entry of the
INTERFACE
serial interface parameters.
The following parameters can be configured in the table:
Baud rate
Bits
Parity
Stop bits
HW-Handshake
SW-Handshake
Owner
Baud – Data transmission rate
The R&S ESU supports baud rates between 110 and 128000 baud. The default set-
ting is 9600 baud.
Remote command:
Bits – Number of data bits per word
For the transmission of text without special characters, 7 bits are adequate. For
binary data as well as for text with special characters, 8 bits must be selected
(default setting).
Remote command:
Operating Manual 1302.6163.12 - 03
data transmission rate
number of data bits
bit parity check
number of stop bits
hardware handshake protocol
software handshake protocol
assignment to the measuring instrument or computer
SYST:COMM:SER:BAUD 9600
SYST:COMM:SER:BITS 7
Instrument Functions
Basic Settings
4.283