R&S ESU Series Operating Manual page 459

R&S ESU
Example:
"CALC:DELT:FUNC:PNO ON"
'Switches on the phase noise measurement with all delta markers in screen A.
"CALC:DELT:FUNC:FIX:RPO:X 128 MHZ"
'Sets the reference frequency to 128 MHz.
"CALC:DELT:FUNC:FIX:RPO:Y 30 DBM"
'Sets the reference level to +30 dBm
Characteristics: *RST value: OFF
SCPI: device-specific
Mode: A
CALCulate<1|2>:DELTamarker<1...4>:FUNCtion:PNOise:RESult?
This command queries the result of the phase noise measurement in the selected measurement
window. The measurement will be switched on, if necessary.
Example:
"CALC:DELT:FUNC:PNO:RES?"
'Outputs the result of phase noise measurement of the selected delta marker in
screen A.
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
This command is only a query and therefore has no *RST value.
6.20
Remote Control – Description of Commands
CALCulate Subsystem
Operating Manual 1302.6163.12 - 03