R&S ESU Series Operating Manual page 835

R&S ESU
Error code
-114
-120
-121
-123
-124
-128
-130
-131
-134
-138
-140
-141
-144
-148
-150
-151
9.4
Error text in the case of queue poll
Error explanation
Header suffix out of range
The header contains an invalid numeric suffix.
Example: SENSe3 does not exist in the instrument.
Numeric data error
The command contains a faulty numeric parameter.
Invalid character in number
A number contains an invalid character.
Example: An "A" in a decimal number or a "9" in an octal number.
Exponent too large
The absolute value of the exponent is greater than 32000.
Too many digits
The number includes too many digits.
Numeric data not allowed
The command includes a number which is not allowed at this position.
Example: The command INPut:COUPling requires indication of a text parameter.
Suffix error
The command contains a faulty suffix.
Invalid suffix
The suffix is invalid for this instrument.
Example: nHz is not defined.
Suffix too long
The suffix contains more than 12 characters.
Suffix not allowed
A suffix is not allowed for this command or at this position of the command.
Example: The command *RCL does not permit a suffix to be indicated.
Character data error
The command contains a faulty text parameter
Invalid character data
The text parameter either contains an invalid character or it is invalid for this command.
Example: Write error with parameter indication;INPut:COUPling XC.
Character data too long
The text parameter contains more than 12 characters.
Character data not allowed
The text parameter is not allowed for this command or at this position of the command.
Example: The command *RCL requires a number to be indicated.
String data error
The command contains a faulty string.
Invalid string data
The command contains a faulty string.
Example: An END message has been received prior to the terminating apostrophe.
Error Messages
SCPI-Specific Error Messages
Operating Manual 1302.6163.12 - 03