R&S ESU Series Operating Manual page 318

R&S ESU
CONFIGURE The CONFIGURE NETWORK softkey opens the dialog box with the network set-
NETWORK tings.
The softkey is used to modify an existing network configuration after the correspond-
ing tabs are selected (see the Quick Start Guide 6,
A PC keyboard with trackball (or mouse instead) is required for the installation/
configuration of the network support.
Remote command:
SHOW CONFIG The SHOW CONFIG softkey shows the current network configuration.
NETWORK The NETWORK LOGIN softkey opens the dialog box with the auto login settings.
LOGIN
Important:
The password was changed to '123456' with firmware version 4.5. For version < 4.5,
the password is 'instrument'.
When a network is installed, the preset user name 'instrument' and the password
123456' can be adapted to a new user (see the Quick Start Guide 6,
face".).
Operating Manual 1302.6163.12 - 03
" LAN
--
Instrument Functions
Basic Settings
Interface").
" LAN Inter-
4.287