R&S ESU Series Operating Manual page 773

R&S ESU
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
Devices Command (Sheet 46 of 47)
R&S TRACe:IQ:SET
ESU
R&S TRACe:IQ:SRATe
ESU
R&S TRACe:IQ[:STATe]
ESU
R&S FSE TRIGger<1|2>[:SEQuence]:HOLDoff
ESU
FSE TRIGger<1|2>[:SEQuence]:LEVel:AF
FSE TRIGger<1|2>[:SEQuence]:LEVel:VIDeo
FSE TRIGger<1|2>[:SEQuence]:LEVel[:EXTernal]
R&S TRIGger<1|2>[:SEQuence]:LEVel:IFPower
ESU
R&S FSE TRIGger<1|2>[:SEQuence]:SLOPe
ESU
R&S TRIGger<1|2>[:SEQuence]:SOURce
ESU
FSE/ TRIGger<1|2>[:SEQuence]:SOURce
ESIB
FSIQ TRIGger<1|2>[:SEQuence]:SOURce
FSET TRIGger<1|2>[:SEQuence]:SOURce
R&S FSE TRIGger<1|2>[:SEQuence]:SOURce:VIDeo:
ESU FORMat:LPFrame
R&S FSE TRIGger<1|2>[:SEQuence]:SOURce:VIDeo:
ESU FIELd:SELect
R&S FSE TRIGger<1|2>[:SEQuence]:SOURce:VIDeo:LINE:
ESU NUMBer
R&S FSE TRIGger<1|2>[:SEQuence]:SOURce:VIDeo:
ESU SSIGnal:POLarity
6.334
Remote Control – Description of Commands
Parameter Notes
<filter type>, new function for
<rbw>, R&S ESU
<sample rate>,
<trigger source>,
<trigger slope>,
<pretrigger samples>,
<# of samples>
16kHz to 32MHz new function for
R&S ESU
ON | OFF new function for
R&S ESU
0 to 100s
-120 to +120PCT not available for
R&S ESU
0 to 100PCT not available for
R&S ESU; replaced by
TRIGger:SEQuence:
SOURce:VIDeo
-5.0 to +5.0V not available for
R&S ESU
<numeric_value> new command for
R&S ESU
POSitive | NEGative
IMMediate | LINE |
EXTernal | VIDeo |
IFPower
IMMediate | LINE |
EXTernal | VIDeo |
RFPower | TV | AF
IMMediate | LINE |
EXTernal | VIDeo |
RFPower | AF
IMMediate | LINE |
EXTernal | VIDeo
525 | 625 requires option B6 on
FSP
ALL|ODD|EVEN requires option B6 on
FSP
<numeric_value> requires option B6 on
FSP
NEGative | POSitive requires option B6 on
FSP
Operating Manual 1302.6163.12 - 03