R&S ESU
This softkey does not have any effect on limit lines that represent absolute values
for the y-axis.
Remote command:
4.9.1.2
Entry and Editing of Limit Lines
A limit line is characterized by
•
its name
•
the assignment of domain (frequency or time)
•
the scaling in absolute or relative times or frequencies
•
the vertical unit
•
the interpolation
•
the vertical scaling
•
the vertical threshold (only with relative vertical scaling)
•
the margin
•
the definition of the limit line as either upper or lower limit.
•
the data points for frequency/time and level.
At the time of entry, the R&S ESU immediately checks that all limit lines are in accor-
dance with certain guidelines. These guidelines must be observed if specified oper-
ation is to be guaranteed.
Operating Manual 1302.6163.12 - 03
CALC:LIM3:LOW:OFFS 3dB
CALC:LIM3:UPP:OFFS 3dB
Instrument Functions
Basic Settings
4.245