R&S ESU Series Operating Manual page 746

R&S ESU
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
Devices Command (Sheet 19 of 47)
FSE CONFigure[:MS]MEASurement?
FSET DIAGnostic:INFO:CCOunt:ATTenuation?
FSE DIAGnostic:INFO:CCOunt:ATTenuation<1 | 10>?
FSIQ DIAGnostic:INFO:CCOunt:ATTenuation<1 | 2 | 3>?
ESIB DIAGnostic:INFO:CCOunt:ATTenuation<1|2|4>?
FSE DIAGnostic:INFO:CCOunt:PRESelector<1..6>?
R&S DIAGnostic:SERVice:CSOurce[:POWer]
ESU
FSE DIAGnostic:SERVice:FUNCtion
FSET DIAGnostic:SERVice:HGENerator
R&S DIAGnostic:SERVice:HWINfo?
ESU
R&S FSE DIAGnostic:SERVice:INPut[:SELect]
ESU
R&S DIAGnostic:SERVice:INPut:PULSed[:STATe]
ESU
R&S DIAGnostic:SERVice:INPut:PULSed:PRATe
ESU
R&S FSE DIAGnostic:SERVice:NSOurce
ESU
R&S DIAGnostic:SERVice:SFUNction
ESU
R&S DIAGnostic:SERVice:STESt:RESult?
ESU
R&S FSE DISPlay:ANNotation:FREQuency
ESU
DISPlay:BARGraph:LEVel:LOWer
DISPlay:BARGraph:LEVel:UPPer
R&S FSE DISPlay:CMAP<1...26>:DEFault<1|2>
ESU
Operating Manual 1302.6163.12 - 03
Remote Control – Description of Commands
Parameter Notes
not available for
R&S ESU and FSET
not available for
R&S ESU
not available for
R&S ESU
not available for
R&S ESU
not available for
R&S ESU
not available for
R&S ESU
<numeric_value> new function for
R&S ESU
<numeric_value>, not available for
<numeric_value> to R&S ESU. Replaced by
DIAG:SERV:SFUNction
OFF | 10 kHz | 100 kHz | not available for
BALanced R&S ESU
new function for
R&S ESU
CALibration | RF
ON | OFF new command for
R&S ESU
<numeric_value> new command for
R&S ESU
ON | OFF
<string> to replacement for DIAG:
SERV:FUNC of
R&S ESU;
necessary due to
different parameter
formats needed on the
R&S ESU
new function for
R&S ESU
ON | OFF
not available for
R&S ESU
not available for
R&S ESU
larger selection of
independently
configurable items (1 to
26)
6.307