R&S ESU Series Operating Manual page 171

R&S ESU
DETECTOR
AUTO SELECT
DETECTOR AUTO PEAK
DETECTOR MAX PEAK
DETECTOR MIN PEAK
DETECTOR SAMPLE
DETECTOR RMS
DETECTOR AVERAGE
DETECTOR QPK
DETECTOR CISPR RMS
DETECTOR CISPR AV
The DETECTOR softkey opens a submenu for selecting the detector for the selected
trace. The softkey is highlighted if the detector is not selected with AUTO SELECT.
The detector can be selected independently for each trace. The AUTO SELECT
mode selects the optimum detector for each display mode of the trace (Clear/Write,
Max Hold or Min Hold).
The softkeys for the detectors are mutually exclusive selection keys.
AUTO SELECT The AUTO SELECT softkey (= default setting) selects the optimum detector for the
set display mode of the trace (Clear/Write, Max Hold and Min Hold) and the selected
filter mode (bandpass/FFT).
Trace display
Clear/Write
Average
Max Hold
Min Hold
The detector activated for the specific trace is identified in the respective trace dis-
play field as follows:
Detector
Auto Peak
Max Peak
Min Peak
Average
RMS
Sample
Quasipeak
Remote command:
DETECTOR The DETECTOR AUTOPEAK softkey activates the autopeak detector.
AUTO PEAK
Remote command:
4.140
Detector (bandpass)
Auto Peak
Sample
Max Peak
Min Peak
AP
PK
MI
AV
RM
SA
QP
DET:AUTO ON
DET APE
Operating Manual 1302.6163.12 - 03
Instrument Functions
Analyzer Mode
Detector (FFT)
Max Peak
Sample
Max Peak
Max Peak