Change Of Settings Via Markers - Mkr-> Key - R&S ESU Series Operating Manual

R&S ESU
A marker can only be enabled when at least one trace in the corresponding window
is visible.
If a trace is turned off, the corresponding markers and marker functions are also
deactivated. If the trace is switched on again (VIEW, CLR/WRITE;..), the markers
along with coupled functions will be restored to their original positions provided the
markers have not been used on another trace.
MKR−>TRACE The MKR−>TRACE softkey places the marker on a new trace. The trace is selected
via a data entry field. Only those traces can be selected which are visible on the
screen in the same window.
The function of the softkey is identical to the MKR−>TRACE softkey in the
MKR FCNT and MKR-> menu.
Example:
Three traces are presented on the screen. The marker is always on Trace 1 on
switching on.
[MKR ->TRACE] "2"
[MKR ->TRACE] "3"
Remote command:
ALL MARKER Pressing the ALL MARKER OFF softkey switches off all marker.
OFF
4.5.8 Change of Settings via Markers – MKR-> Key
The MKR-> menu offers functions through which instrument parameters can be
changed with the aid of the currently active marker. The functions can be used on
markers and delta markers.
On opening the menu, the entry for the last active marker is activated; if no marker
was enabled, MARKER 1 is activated and a peak search is performed.
MKR->
SELECT MARKER
PEAK
NEXT PEAK
NEXT PEAK RIGHT
NEXT PEAK LEFT
ADD TO PEAK LIST
TUNE TO MARKER
MARKER TRACK
MKR->TRACE
Side menu
MKR-> STEPSIZE
Operating Manual 1302.6163.12 - 03
The marker jumps to Trace 2 but remains on the previous frequency or time.
The marker jumps to Trace 3.
CALC:MARK1:TRAC 1
CALC:DELT:TRAC 1
Instrument Functions
Receiver Mode
4.65