R&S ESU Series Operating Manual page 585

R&S ESU
MMEMory:SELect[:ITEM]:HWSettings ON | OFF
This command includes the hardware settings in the list of data subsets of a device setting to be stored/
loaded. The hardware settings include:
• current configuration of general device parameters (general setup)
• current setting of the measurement hardware including markers
• activated limit lines:
A data set may include 8 limit lines at maximum in each measurement window. This number
includes the activated limit lines and, if available, the de-activated limit lines last used.
Therefore the combination of the non-activated restored limit lines depends on the sequence of use
with the command MMEM:LOAD.
• user-defined color setting
• configuration for the hardcopy output
• the activated transducers:
A data set may include 4 transducer factors at maximum. It comprises the activated factors and, if
available, the de- activated factors last used. Therefore the combination of non-activated restored
transducer factors depends on the sequence of use with the command MMEM:LOAD.
• Tracking generator settings
(only in conjunction with option Tracking Generator B9 or External Generator Control B10)
• Correction data for source calibration
(only in conjunction with option Tracking Generator B9 or External Generator Control B10)
Example:
"MMEM:SEL:HWS ON"
Characteristics: *RST value: ON
SCPI: device-specific
Mode: R, A
MMEMory:SELect[:ITEM]:LINes:ALL ON | OFF
This command adds all limit lines (activated and de-activated) to the list of device settings to be stored/
loaded.
Example:
"MMEM:SEL:LIN:ALL ON"
Characteristics: *RST value: ON
SCPI: device-specific
Mode: R, A
MMEMory:SELect[:ITEM]:FINal ON | OFF
This command includes the final measurement data in the list of partial datasets of a device setting to
be stored/loaded.
Example:
"MMEM:SEL:FIN ON"
'inserts the final measurement data in the list of partial data sets
Characteristics: *RST value: ON
SCPI: device-specific
Mode: R, A
6.146
Remote Control – Description of Commands
MMEMory Subsystem
Operating Manual 1302.6163.12 - 03