R&S ESU Series Operating Manual page 836

R&S ESU
Error code
-158
-160
-161
-168
-170
-171
-178
Error code
-200
-201
-202
-210
-211
-212
-213
Operating Manual 1302.6163.12 - 03
Error text in the case of queue poll
Error explanation
String data not allowed
The command contains a valid string at a position which is not allowed.
Example: A text parameter is set in quotation marks, INPut:COUPling "DC"
Block data error
The command contains faulty block data.
Invalid block data
The command contains faulty block data.
Example: An END message was received prior to reception of the expected number
of data.
Block data not allowed
The command contains valid block data at an invalid position.
Example: The command *RCL requires a number to be indicated.
Expression error
The command contains an invalid mathematical expression.
Invalid expression
The command contains an invalid mathematical expression.
Example: The expression contains mismatching parentheses.
Expression data not allowed
The command contains a mathematical expression at an invalid position.
Error text in the case of queue poll
Error explanation
Execution error
Error on execution of the command.
Invalid while in local
The command is not executable while the device is in local due to a hard local control.
Example: The device receives a command which would change the rotary knob state,
but the device is in local so the command can not be executed.
Settings lost due to rtl
A setting associated with hard local control was lost when the device changed to
LOCS from REMS or to LWLS from RWLS.
Trigger error
Error on triggering the device.
Trigger ignored
The trigger (GET, *TRG or trigger signal) was ignored because of device timing
considerations.
Example: The device was not ready to respond.
Arm ignored
An arming signal was ignored by the device.
Init ignored
Measurement initialization was ignored as another measurement was already in
progress.
Error Messages
SCPI-Specific Error Messages
9.5