R&S ESU Series Operating Manual page 110

R&S ESU
IF
RECEIVER FREQUENCY
ADD TO PEAK LIST
DETECTOR
MEAS TIME
DEMOD
FINAL MEAS
IF RBW
SPAN MANUAL
The IF hotkey selects the IF analysis mode (IF spectrum analysis) and activates the
menu for setting the main parameters.
Remote command:
RECEIVER The RECEIVER FREQUENCY softkey activates the entry field of the receiver fre-
FREQUENCY
quency.
For further information refer to the descriptions in section
"RECEIVER FREQUENCY" on page 4.14
ADD TO PEAK The ADD TO PEAK LIST softkey adds the receiver frequency of the current marker
LIST to the peak list.
For further information refer to the descriptions in section
TO PEAK LIST" on page 4.27
DETECTOR The DETECTOR softkey opens a submenu to select the detector and combinations
of detectors.
For further information refer to the descriptions in section
"DETECTOR" on page 4.29
MEAS TIME The MEAS TIME softkey activates the entry field for the measurement time.
For further information refer to the descriptions in section
TIME" on page 4.31
DEMOD The DEMOD softkey calls a submenu in which the desired type of demodulation can
be switched on.
For further information refer to the descriptions in section
"DEMOD" on page 4.33
FINAL MEAS
The FINAL MEAS softkey opens a submenue where conditions for measurement
can be set and the final measurement can be started.
For further information refer to the descriptions in section
MEAS" on page 4.38
Operating Manual 1302.6163.12 - 03
!
!
!
INST IFAN
(MKR menu).
(MEAS menu).
(MEAS menu).
(MEAS menu).
(MEAS menu).
Instrument Functions
IF Spectrum Analysis Mode
"Receiver Mode"
(FREQ menu).
"Receiver Mode"
"Receiver Mode"
"Receiver Mode"
"Receiver Mode"
"Receiver Mode"
–
– "ADD
–
– "MEAS
–
– "FINAL
4.79