R&S ESU Series Operating Manual page 71

R&S ESU
EDIT The EDIT FREQUENCY softkey activates table EDIT PEAK LIST. The cursor marks
FREQUENCY the upper field of column FREQUENCY.
Remote command:
INSERT The INSERT softkey creates an empty line above the current cursor position.
Remote command:
DELETE The DELETE softkey erases the complete line at the cursor position. Before dele-
tion, a message appears requesting confirmation.
Remote command:
SORT BY The softkey SORT BY FREQUENCY sorts the table in a descending order accord-
FREQUENCY ing the entries in the FREQUENCY column.
Remote command:
SORT BY The softkey SORT BY DELTA LIMIT sorts the table in a descending order according
DELTALIMIT to the entries in the DELTA LIMIT column.
Remote command:
ASCII FILE The ASCII FILE EXPORT softkey stores the final measurement data in a file with
EXPORT ASCII format, e.g. on memory stick.
Remote command:
The file consists of the header containing important scaling parameters, several data
sections containing the scan settings and a data section containing the results of the
final measurement.
The data of the file header consist of three columns, each separated by a semicolon:
parameter name; numeric value; base unit
The data section for the trace date starts with the keyword " Trace <n> Final" (<n> =
number of stored trace), followed by the measured data in one or several columns
which are also separated by a semicolon.
This format can be read in from spreadsheet calculation programs, e.g. MS Excel. It
is necessary to define ';' as a separator.
Different language versions of evaluation programs may require a different han-
dling of the decimal point. It is therefore possible to select between separators '.'
(decimal point) and ',' (comma) using softkey DECIM SEP.
DECIM SEP The DECIM SEP softkey selects the decimal separator between '.' (decimal point)
and ',' (comma) with floating-point numerals for the function ASCII FILE EXPORT.
With the selection of the decimal separator different language versions of evaluation
programs (e.g. MS Excel) can be supported.
Remote command:
4.40
--
--
--
--
--
FORM ASC;
MMEM:STOR:FIN 1,'FINAL.DAT'
FORM:DEXP:DSEP POIN
Operating Manual 1302.6163.12 - 03
Instrument Functions
Receiver Mode