R&S ESU Series Operating Manual page 306

R&S ESU
Comment - Entry of comment
Any comment with a maximum length of 50 characters can be entered.
Remote command:
INSERT LINE The INSERT LINE softkey inserts an empty line above the marked reference value.
When entering a new reference value in the line, the ascending order of frequencies
must be taken into consideration, however.
Remote command:
DELETE LINE The DELETE LINE softkey deletes the marked reference value (complete line). The
reference values that follow move one line up.
Remote command:
SAVE TRD The SAVE TRD FACTOR softkey saves the changed table in a file on the internal
FACTOR hard disk.
If there is already a transducer factor that has the same name, a confirmation query
is output.
If the new factor is active, the new values become immediately valid.
If a transducer set is switched on comprising the factor, the values will only be used
when the set is switched on next time.
Remote command:
Entry and Editing of Transducer Sets
A transducer set is characterized by:
– maximum 10 ranges (Ranges) in which different transducer factors can be active
– the combination of several transducer factors per range (Factor)
– a transducer-set name (Name)
NEW / EDIT
INS BEFORE RANGE
INS AFTER RANGE
DELETE RANGE
RANGES 1-5/6-10
SAVE TRD SET
The NEW and EDIT softkeys both open the submenu for editing and entering new
transducer factors if softkey TRANSDUCER SET is active.
Operating Manual 1302.6163.12 - 03
CORR:TRAN:COMM <string>
--
--
--
(executed automatically after the definition of the
reference values)
Instrument Functions
Basic Settings
4.275