R&S ESU Series Operating Manual page 316

R&S ESU
Default setting is NONE.
Remote command:
Owner – Assignment of the interface
The serial interface can be assigned alternatively to the measuring instrument sec-
tion or to the computer section.
If the interface is assigned to one section of the instrument, it is not available to the
other section.
INSTRUMENTThe interface is assigned to the measuring instrument section.
OS
Setting Date and Time
TIME+DATE
The TIME+DATE softkey activates the entry of time and date for the internal real-
time clock.
Time - Input of time
In the corresponding dialog box, the time is partitioned into two input fields so that
hours and minutes can be entered independently.
Remote command:
Date - Input of Date
In the corresponding dialog box, the date is partitioned into 3 input fields so that day,
month and year can be input separately.
For the selection of the month, pressing a unit key opens a list of abbreviations
wherein the desired month can be selected.
Remote command:
Configuration of Network Settings
The instrument can be connected to an Ethernet LAN (local area network) by means
of the LAN Interface. This allows data transmission via the network and the use of
network printers. The network card is able to handle both 10 MHz Ethernet IEEE
802.3 and 100 MHz Ethernet IEEE 802.3u.
For more details see the Quick Start Guide 6,
Operating Manual 1302.6163.12 - 03
SYST:COMM:SER:PACE NONE
Outputs to the interface from the computer section are not possi-
ble and will get lost.
The interface is assigned to the computer section. It cannot be
used by the measuring instrument section. This means that
remote control of the instrument via the interface is not possible.
SYST:TIME 21,59
SYST:DATE 1009,03,01
Instrument Functions
" LAN Interface".
Basic Settings
4.285