R&S ESU Series Operating Manual page 741

R&S ESU
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
Devices Command (Sheet 14 of 47)
R&S CALCulate<1|2>:MATH:MODE
ESU
FSE CALCulate<1|2>:MATH<1...4>:MODE
R&S CALCulate<1|2>:MATH:POS
ESU
R&S FSE CALCulate<1|2>:MATH:STATe
ESU
R&S FSE CALCulate<1|2>:MATH[:EXPRession][:DEFine]
ESU
FSE CALCulate<1|2>:RLINe
FSE CALCulate<1|2>:RLINe:STATe
R&S FSE CALCulate<1|2>:THReshold
ESU
R&S FSE CALCulate<1|2>:THReshold:STATe
ESU
FSE CALCulate<1|2>:TLINe<1|2>
FSE CALCulate<1|2>:TLINe<1|2>:STATe
FSE CALCulate<1|2>:UNIT:ANGLe
R&S CALCulate<1|2>:UNIT:POWer
ESU
6.302
Remote Control – Description of Commands
Parameter Notes
LINear | LOGarithmic affects all traces on the
R&S ESU; therefore the
numeric suffix :
MATH<1...4> is not
allowed for the
R&S ESU
LINear | LOGarithmic for FSE, only the trace
indicated by a numeric
suffix is affected
-100PCT to 200PCT new function for
R&S ESU; replacement
for CALC:RLINe of the
FSE
ON | OFF for R&S ESU, traces
can only be subtracted
from trace 1; therefore
there is no numeric suffix
behind :MATH
<expr> for R&S ESU, traces
can only be subtracted
from trace 1; therefore
there is no numeric suffix
behind :MATH and
<expr> may only consist
of (TRACE1-TRACE2)
or (TRACE1-TRACE3)
MIN to MAX not available for
R&S ESU (replaced by
CALC:MATH:POS)
ON | OFF not available for
R&S ESU (replaced by
CALC:MATH:POS)
MIN to MAX
ON | OFF
0 to 1000s not available on the
R&S ESU; replaced by
CALC:SLIMits:LEFT and
CALC:SLIMits:RIGHt
ON | OFF not available on the
R&S ESU; replaced by
CALC:SLIMits:LEFT and
CALC:SLIMits:RIGHt
DEG | RAD not available for
R&S ESU
DBM | V | A | W | DBPW available units are
| WATT | DBUV | DBMV compatible to the FSE
| VOLT | DBUA |
AMPere
Operating Manual 1302.6163.12 - 03