R&S ESU Series Operating Manual page 671

R&S ESU
STATus:QUEStionable:ACPLimit:PTRansition 0 to 65535
This command sets the edge detectors of all bits of the STATus:QUEStionable:ACPLimit register from
0 to 1 for the transitions of the CONDition bit.
Example:
"STAT:QUES:ACPL:PTR 65535"
Characteristics: *RST value: –
SCPI: device-specific
Mode: R, A
STATus:QUEStionable:ACPLimit:NTRansition 0 to 65535
This command sets the edge detectors of all bits of the STATus:QUEStionable:ACPLimit register from
1 to 0 for the transitions of the CONDition bit.
Example:
"STAT:QUES:ACPL:NTR 65535"
Characteristics: *RST value: –
SCPI: device-specific
Mode: R, A
STATus:QUEStionable:FREQuency[:EVENt]?
This command queries the contents of the EVENt section of the STATus:QUEStionable:FREQuency
register.
Example:
"STAT:QUES:FREQ?"
Characteristics: *RST value: –
SCPI: device-specific
Mode: R, A
Readout deletes the contents of the EVENt section.
STATus:QUEStionable:FREQuency:CONDition?
This command queries the contents of the CONDition section of the STATus:QUEStionable:
FREQuency register. Readout does not delete the contents of the CONDition section.
Example:
"STAT:QUES:FREQ:COND?"
Characteristics: *RST value: –
SCPI: device-specific
Mode: R, A
STATus:QUEStionable:FREQuency:ENABle 0 to 65535
This command sets the bits of the ENABle section of the STATus:QUEStionable:FREQuency register.
The ENABle register selectively enables the individual events of the associated EVENt section for the
summary bit.
Example:
"STAT:QUES:FREQ:ENAB 65535"
Characteristics: *RST value: –
SCPI: device-specific
Mode: R, A
6.232
Remote Control – Description of Commands
Operating Manual 1302.6163.12 - 03
STATus Subsystem