R&S ESU Series Operating Manual page 599

R&S ESU
Example:
"INIT:CONT OFF"
'Selects single sweep operation
"CORR:COLL THR;*WAI"
'Starts the measurement of reference data using direct connection between
generator and device input and waits for the sweep end.
Characteristics: *RST value: --
SCPI: conform
Mode: A
This command is an "event" and therefore has no *RST value and no query.
This command is only valid in conjunction with the tracking generator / ext. generator control option
(B9/B10).
[SENSe<1|2>:]CORRection:RECall
This command restores the instrument setting that was valid for the measurement of the reference
data, provided that the tracking generator is active.
Example:
"CORR:REC"
Characteristics: *RST value: -
SCPI: conform
Mode: A
This command is an event and therefore has no *RST value and no query.
This command is only valid in conjunction with the tracking generator / ext. generator control option
(B9/B10).
[SENSe<1|2>:]CORRection:TRANsducer:ACTive?
This command queries the active transducer factor. If no transducer factor is active, an empty string is
returned.
Example:
"CORR:TRAN:ACT?"
Characteristics: *RST value: -
SCPI: device-specific
Mode: R, A
This command is a query and therefore has no *RST value.
[SENSe<1|2>:]CORRection:TRANsducer:CATalog?
This command queries all the names of the transducer files saved on the hard disc.
The syntax of the output is:
<sum of file length of all following files>,<free spaces on hard disc>,<1
<2 nd file name>,<2 nd
Example:
"CORR:TRAN:CAT?"
Characteristics: *RST value: -
SCPI: device-specific
Mode: R, A
6.160
file length>,....,<n th file name>,<n
Remote Control – Description of Commands
st file name>,<1
th file length>
Operating Manual 1302.6163.12 - 03
SENSe Subsystem
st file length>,