R&S ESU Series Operating Manual page 762

R&S ESU
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
Devices Command (Sheet 35 of 47)
R&S [SENSe<1|2>:]DETector<1...3>[:FUNCtion]
ESU
ESIB [SENSe<1|2>:]DETector<1..4>[:FUNCtion]
R&S FSE [SENSe<1|2>:]DETector<1...3>[:FUNCtion]:AUTO
ESU
FSET [SENSe<1|2>:]DETector<1...4>:PSTRetch:AUTO
FSET [SENSe<1|2>:]DETecto<1...4>r:PSTRetch[:
STATe]
ESIB [SENSe<1|2>:]DETector<1...4>:RECeiver[:
FUNCtion]
FSET [SENSe<1|2>:]DETector<1...4>:RECeiver[:
FUNCtion]
FSE [SENSe<1|2>:]FILTer:CCITt[:STATe]
FSE [SENSe<1|2>:]FILTer:CMESsage[:STATe]
FSE [SENSe<1|2>:]FILTer:DEMPhasis:LINK
FSE [SENSe<1|2>:]FILTer:DEMPhasis:TCONstant
FSE [SENSe<1|2>:]FILTer:DEMPhasis[:STATe]
FSE [SENSe<1|2>:]FILTer:HPASs:FREQuency
FSET [SENSe<1|2>:]FILTer:HPASs:FREQuency
FSE [SENSe<1|2>:]FILTer:HPASs[:STATe]
FSE [SENSe<1|2>:]FILTer:LPASs:FREQuency
FSE [SENSe<1|2>:]FILTer:LPASs[:STATe]
FSET [SENSe<1|2>:]FILTer:NOTCh[:STATe]
FSET [SENSe<1|2>:]FM[:DEViation]:RANGe:UPPer
FSET [SENSe<1|2>:]FM[:DEViation]:RANGe[:UPPer]
Operating Manual 1302.6163.12 - 03
Remote Control – Description of Commands
Parameter Notes
APEak |NEGative | R&S ESU: number of
POSitive | SAMPle | traces restricted to 3;
RMS | AVERage | detector settings
QPEak correspond to selected
screen
FSE: Qpeak not
available
APEak |NEGative |
POSitive | SAMPle |
RMS | AVERage |
QPEak
ON | OFF number of traces
restricted to 3
ON | OFF not available for
R&S ESU
ON | OFF not available for
R&S ESU
POSitive |NEGative| not available for
RMS | AVERage | R&S ESU
QPEak
POSitive | NEGative | not available for
RMS | AVERage R&S ESU
ON | OFF not available for
R&S ESU and FSET
ON | OFF not available for
R&S ESU and FSET
DISPlay | AUDio not available for
R&S ESU and FSET
<numeric_value> not available for
R&S ESU and FSET
ON | OFF not available for
R&S ESU and FSET
30 Hz | 300 HZ not available for
R&S ESU and FSET
10 kHz | 1 kHz | 100 Hz not available for
R&S ESU
ON | OFF not available for
R&S ESU
3 kHz| 15 kHz not available for
R&S ESU and FSET
ON | OFF not available for
R&S ESU and FSET
ON | OFF not available for
R&S ESU
ON | OFF not available for
R&S ESU
<numeric_value> not available for
R&S ESU
6.323