R&S ESU Series Operating Manual page 837

R&S ESU
Error code
-214
-215
-220
-221
-222
-223
-224
-230
-231
-240
-241
-250
-251
-252
9.6
Error text in the case of queue poll
Error explanation
Trigger deadlock
The trigger source for the initiation of measurement is set to GET and subsequent
measurement is received. The measurement cannot be started until a GET is
received, but the GET would cause an interrupted-error)
Arm deadlock
The trigger source for the initiation of measurement is set to GET and subsequent
measurement is received. The measurement cannot be started until a GET is
received, but the GET would cause an interrupted-error.
Parameter error
The command contains a faulty or invalid parameter.
Settings conflict
There is a conflict between setting of parameter value and instrument state.
Data out of range
The parameter value lies out of the allowed range of the instrument.
Too much data
The command contains too many data.
Example: The instrument does not have sufficient storage space.
Illegal parameter value
The parameter value is invalid.
Example: The text parameter is invalid, TRIGger:SWEep:SOURce TASTe
Data corrupt or stale
The data are incomplete or invalid.
Example: The instrument has aborted a measurement.
Data questionable
The measurement accuracy is suspect.
Hardware error
The command cannot be executed due to problems with the instrument hardware.
Hardware missing
Hardware is missing.
Example: An option is not fitted.
Mass storage error
A mass storage error occurred.
Missing mass storage
The mass storage is missing.
Example: An option is not installed.
Missing media
The media is missing.
Example: There is no memory stick connected.
Error Messages
SCPI-Specific Error Messages
Operating Manual 1302.6163.12 - 03