R&S ESU Series Operating Manual page 302

R&S ESU
TRANSDUCER The TRANSDUCER FACTOR softkey places the scrollbar on the position of the
FACTOR active transducer factor.
If a transducer factor is not active, the scrollbar is placed on the first line of the table.
Remote command:
TRANSDUCER The TRANSDUCER SET softkey places the scrollbar on the position of the active
SET transducer set. For further details refer to
page
If no transducer set is switched on, the bar is set to the first line of the table.
Remote command:
EDIT The EDIT TRD FACTOR softkey gives access to the submenu for editing and gener-
ating transducer factors. For details refer to section
Factors" on page
NEW The NEW FACTOR softkey gives access to the submenu for editing and generating
transducer factors. For details refer to section
tors" on page
DELETE The DELETE softkey deletes the marked factor or set.
To prevent deletion by mistake, deletion has to be confirmed.
Remote command:
VIEW The VIEW TRANSDUCER softkey activates the display of the active transducer fac-
TRANSDUCER tor or set. During the measurement, the interpolated characteristic of the active
transducer factor or set is shown in the diagram instead of the measured values.
Remote command:
VIEW The VIEW TRANSDUCER softkey activates the display of the active transducer fac-
TRANSDUCER tor or set. During the measurement, the interpolated characteristic of the active
transducer factor or set is shown in the diagram instead of the measured values.
Remote command:
REFLVL ADJ When a transducer factor is used, the trace is moved by a calculated shift. However,
AUTO MAN an upward shift reduces the dynamic range for the displayed values. With the soft-
key REFLVL ADJ an automatic reference level offset adaptation allows to restore
the original dynamic range by also shifting the reference level by the maximum
value of the transducer factor.
Operating Manual 1302.6163.12 - 03
CORR:TRAN:SEL <name>
CORR:TRAN ON | OFF
4.275.
CORR:TSET:SEL <name>
CORR:TSET ON |OFF
4.272.
4.272.
CORR:TRAN DEL
CORR:TRAN:VIEW ON
CORR:TRAN:VIEW ON
Instrument Functions
"Entry and Editing of Transducer Sets" on
"Entry and Editing of Transducer
"Entry and Editing of Transducer Fac-
Basic Settings
4.271