R&S ESU Series Operating Manual page 310

R&S ESU
TIME+DATE
CONFIGURE
NETWORK
NETWORK LOGIN
OPTIONS
Side menu
SOFT FRONTPANEL
Selecting the GPIB Address
GPIB The GPIB softkey opens a submenu for setting the parameters of the remote-control
interface.
Remote command:
GPIB ADDRESS The GPIB ADDRESS softkey enables the entry of the GPIB address.
Valid addresses are 0 through 30. The default address is 20.
Remote command:
ID STRING The ID STRING FACTORY softkey selects the default response to the *IDN? query.
FACTORY
Remote command:
ID STRING The ID STRING USER softkey opens an editor for entering a user-defined response
USER to the *IDN? query.
Max. length of output string: 36 characters
Remote command:
Operating Manual 1302.6163.12 - 03
COMPUTER NAME
IP ADDRESS
SUBNET MASK
DHCP ON | OFF
CONFIGURE
NETWORK
SHOW CONFIG
!
INSTALL OPTION
REMOVE OPTION
--
SYST:COMM:GPIB:ADDR 20
--
--
Instrument Functions
Basic Settings
4.279