R&S ESU Series Operating Manual page 667

R&S ESU
Mode: R, A
STATus:QUEStionable:PTRansition 0 to 65535
This command sets the edge detectors of all bits of the STATus:QUEStionable register from 0 to 1 for
the transitions of the CONDition bit.
Example:
"STAT:QUES:PTR 65535"
Characteristics: *RST value: –
SCPI: conform
Mode: R, A
STATus:QUEStionable:NTRansition 0 to 65535
This command sets the edge detectors of all bits of the STATus:QUEStionable register from 1 to 0 for
the transitions of the CONDition bit.
Example:
"STAT:QUES:NTR 65535"
Characteristics: *RST value: –
SCPI: conform
Mode: R, A
STATus:QUEStionable:POWer[:EVENt]?
This command queries the contents of the EVENt section of the STATus:QUEStionable:POWer
register. Readout deletes the contents of the EVENt section.
Example:
"STAT:QUES:POW?"
Characteristics: *RST value: –
SCPI: conform
Mode: R, A
STATus:QUEStionable:POWer:CONDition?
This command queries the contents of the CONDition section of the STATus:QUEStionable:POWer
register. Readout does not delete the contents of the CONDition section.
Example:
"STAT:QUES:POW:COND?"
Characteristics: *RST value: –
SCPI: conform
Mode: R, A
STATus:QUEStionable:POWer:ENABle 0 to 65535
This command sets the bits of the ENABle section of the STATus:QUEStionable:POWer register. The
ENABle register selectively enables the individual events of the associated EVENt section for the
summary bit.
Example:
"STAT:QUES:POW:ENAB 65535"
Characteristics: *RST value: –
SCPI: conform
Mode: R, A
6.228
Remote Control – Description of Commands
Operating Manual 1302.6163.12 - 03
STATus Subsystem