R&S ESU Series Operating Manual page 290

R&S ESU
SELECT The SELECT OBJECT softkey activates the SELECT DISPLAY OBJECT table, with
OBJECT which a graphics element can be selected. After selection, the brightness, tint and
saturation of the selected element can be changed using the softkeys of the same
name. The color changes by means of the PREDEFINED COLORS softkey can be
seen immediately on the display screen.
BRIGHTNESS The BRIGHTNESS softkey activates entry of the brightness of the selected graphics
element.
Values between 0 and 100% can be entered.
Remote command:
TINT The TINT softkey activates the entry of the color tint of the selected element. The
entered value is related to a continuous color spectrum ranging from red (0%) to
blue (100%).
Remote command:
Operating Manual 1302.6163.12 - 03
DISP:CMAP3:HSL< hue>,<sat>,<lum>
DISP:CMAP3:HSL <hue>,<sat>,<lum>
Instrument Functions
Basic Settings
4.259