R&S ESU Series Operating Manual page 591

R&S ESU
6.16 SENSe Subsystem
The SENSe subsystem is organized in several subsystems. The commands of these subsystems
directly control device-specific settings, they do not refer to the signal characteristics of the measure-
ment signal.
The SENSe subsystem controls the essential parameters of the R&S ESU. In accordance with the SCPI
standard, the key word "SENSe" is optional for this reason, which means that it is not necessary to
include the SENSe node in command sequences.
The measurement windows are selected by SENSe1 and SENSe2:
SENSe1 = Modification of screen A settings
SENSe2 = Modification of screen B settings.
Screen A is automatically selected if 1 or 2 is missing.
6.152
Remote Control – Description of Commands
Operating Manual 1302.6163.12 - 03
SENSe Subsystem